[Fri Dec 16 13:05:47 2011] Detection parameters:
  Position = (408.5, 276.7) = 5 34 1.05 21 57 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 83.4 +/- 16.4
  Background counts = 101.5
  Rate = 0.03 +/- 0.005

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 8.13'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 10.50"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.707
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 64 for pass 0, mean size = 10.50"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src64.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src64.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src64_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src64.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Fri Dec 16 16:12:30 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Fri Dec 16 22:06:40 2011] Source 68 is offset by -1.028422 and 4.196675 pixels which is larger than
2 X fitted extent = 1.190418 x 1.190418, not incorporating fit results
[Fri Dec 16 22:06:40 2011] Source 68 is offset by -0.923825 and -4.698727 pixels which is larger than
2 X fitted extent = 1.177347 x 1.177347, not incorporating fit results
[Fri Dec 16 22:06:40 2011] Spatial fit model total counts = 1882.600000, observed total counts = 1883.000000
[Fri Dec 16 22:06:40 2011] Offset between fit and detection position for source 68 = 5.050179 pixels
[Fri Dec 16 22:06:40 2011] Warning, changing simple spatial fit ID from 64 to 63
[Fri Dec 16 22:06:40 2011] 1281.783000 total counts/ 122.363000 bgd. counts: snr = 104.813139
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 5.050179 pixels
  Position = (403.9, 274.7) = 5 34 2.50 21 57 36.7
  Extent = 20.4 (20.4-20.4)", rotation angle = 0
  Source counts = 1159.4 +/- 35.8
  Background counts = 122.4
  Rate = 0.2 +/- 0.007
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 28
[Fri Dec 16 22:07:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 20.40"
[Fri Dec 16 22:07:05 2011] source mask rpix=4.7, npix_max = 107, mask sum = 100, frac = 0.928
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 60 for pass 1, mean size = 20.40"
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src60.ximg exists
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src60_1.ximg exists
[Sat Dec 17 06:58:25 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src60 appears to have run properly
[Sat Dec 17 06:58:27 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Sat Dec 17 06:58:27 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Sat Dec 17 06:58:27 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Sat Dec 17 17:06:36 2011] Source 68 is offset by -5.648713 and 2.157747 pixels which is larger than
2 X fitted extent = 1.190418 x 1.190418, not incorporating fit results
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 60 centroid is now closest to src. 65
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:09 2011] Counts = 1159.420000, rescaling region sizes by 2.000000
[Sat Dec 17 17:07:09 2011] XMMSAS src. selection expression = ellipse(35088.594000, 23848.756000, 2448.276070, 2448.276070, 0.000000, X, Y)
[Sat Dec 17 17:07:09 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src68_src.reg
[Sat Dec 17 17:07:09 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (263, 134) - (545, 415)
[Sat Dec 17 17:07:10 2011] XMMSAS bgd. selection expression = annulus(35088.594000, 23848.756000, 8160.920235, 16321.840470, X, Y) && !ellipse(27355.342000, 34652.845720, 1779.752051, 1779.752051, 0.000000, X, Y) && !ellipse(26520.824000, 34621.186000, 1641.112047, 1641.112047, 0.000000, X, Y) && !ellipse(24437.878000, 34129.064200, 1587.160046, 1587.160046, 0.000000, X, Y) && !ellipse(33525.784485, 29448.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34287.324000, 27822.012000, 1617.616047, 1617.616047, 0.000000, X, Y) && !ellipse(33956.363861, 26327.631012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34992.789062, 26396.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31004.911163, 34921.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.286000, 34549.140000, 1646.960047, 1646.960047, 0.000000, X, Y) && !ellipse(28484.487220, 34636.296400, 889.832026, 889.832026, 0.000000, X, Y) && !ellipse(27607.533020, 34552.508209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25887.044800, 34378.449200, 1362.800039, 1362.800039, 0.000000, X, Y) && !ellipse(33618.809924, 30278.788093, 1457.105571, 971.299097, 110.464354, X, Y) && !ellipse(34508.424103, 29981.957581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33659.366000, 30100.127600, 1660.824048, 1660.824048, 0.000000, X, Y) && !ellipse(34699.671173, 29452.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33973.903600, 28761.956000, 1603.520046, 1603.520046, 0.000000, X, Y) && !ellipse(34050.179321, 25866.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25523.528839, 40321.512512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33359.847809, 32149.815552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34601.697937, 30977.705078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35985.052000, 26507.549800, 1647.688047, 1647.688047, 0.000000, X, Y) && !ellipse(34333.826721, 24318.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25715.892000, 41321.340000, 2059.216059, 2059.216059, 0.000000, X, Y) && !ellipse(25957.490723, 40065.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.386200, 39144.840000, 1924.168055, 1924.168055, 0.000000, X, Y) && !ellipse(25808.796000, 38422.762000, 1215.928035, 1215.928035, 0.000000, X, Y) && !ellipse(26078.475098, 37441.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 37107.458832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.137909, 36567.879883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.100739, 36063.010132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.520630, 35615.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25567.820038, 35184.798126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30445.764648, 34876.474884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.998672, 30792.869904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35567.594000, 28063.250000, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(34457.454000, 25493.692000, 1215.920035, 1215.920035, 0.000000, X, Y) && !ellipse(26108.567200, 40666.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26103.549194, 39280.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25355.404419, 38075.017883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.738403, 35969.470795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.954468, 35840.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.895355, 35710.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31710.078000, 35239.618000, 1741.176050, 1741.176050, 0.000000, X, Y) && !ellipse(29088.651733, 34773.719940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.970978, 34186.153992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34793.961884, 22745.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.169800, 33002.900360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33145.257721, 33085.668243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34753.929352, 23531.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34707.288452, 25775.090210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34560.756000, 24572.182000, 3038.984087, 3038.984087, 0.000000, X, Y) && !ellipse(34343.488373, 24738.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34834.745789, 20762.284714, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 17:07:10 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src68.gif
[Sat Dec 17 17:51:43 2011] Mean detx,y = (-4295.26, 7864.95) 
[Sat Dec 17 17:51:45 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:56:59 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:56:59 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Dec 17 17:56:59 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Sat Dec 17 23:22:00 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:00 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Sat Dec 17 23:22:05 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:05 2011] Using photon index=1.80, rate=0.221, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src68.arf
[Sat Dec 17 23:22:05 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:05 2011] Updating source flux to 3.1e-12
[Sat Dec 17 23:22:18 2011] Flag b found in src. 68 procflags, skipping spectral fitting
[Sat Dec 17 23:22:18 2011] Flag c found in src. 68 procflags, skipping spectral fitting