[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (389.5, 320.1) = 5 34 6.98 22 0 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 294.2 +/- 24.8
  Background counts = 138.5
  Rate = 0.08 +/- 0.007

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 6.79'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 9.82 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 9.82"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.3, npix_max = 30, mask sum = 18, frac = 0.592
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 5 for pass 0, mean size = 9.82"
[Fri Dec 16 16:12:28 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Dec 16 16:12:28 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Dec 16 16:12:28 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src5 appears to have run properly
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:40 2011] Warning, spatial fit 5 centroid is now closest to src. 6
[Fri Dec 16 22:06:40 2011] Spatial fit model total counts = 2022.740000, observed total counts = 2019.000000
[Fri Dec 16 22:06:40 2011] Offset between fit and detection position for source 5 = 5.171580 pixels
[Fri Dec 16 22:06:40 2011] Warning, changing simple spatial fit ID from 5 to 41
[Fri Dec 16 22:06:40 2011] 1965.585000 total counts/ 1520.530000 bgd. counts: snr = 11.413430
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 5.171580 pixels
  Position = (394.7, 320.4) = 5 34 5.37 22 0 55.4
  Extent = 20.2 (18.2-20.7)", rotation angle = 0
  Source counts = 445.1 +/- 44.3
  Background counts = 1520.5
  Rate = 0.08 +/- 0.008
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 6
[Fri Dec 16 22:06:40 2011] Source is confused with source 20
[Fri Dec 16 22:06:40 2011] Source is confused with source 26
[Fri Dec 16 22:06:40 2011] Source is confused with source 45
[Fri Dec 16 22:07:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 20.22"
[Fri Dec 16 22:07:05 2011] source mask rpix=4.6, npix_max = 106, mask sum = 100, frac = 0.943
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 20.22"
[Sat Dec 17 06:58:23 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Dec 17 06:58:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src5.csv
[Sat Dec 17 06:58:23 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Dec 17 06:58:23 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src5.csv
[Sat Dec 17 06:58:23 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Dec 17 06:58:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Dec 17 06:58:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Dec 17 06:58:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 5 centroid is now closest to src. 6
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:07 2011] XMMSAS src. selection expression = ellipse(34287.324000, 27822.012000, 1213.212035, 1213.212035, 0.000000, X, Y)
[Sat Dec 17 17:07:07 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src5_src.reg
[Sat Dec 17 17:07:07 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (325, 251) - (464, 390)
[Sat Dec 17 17:07:07 2011] XMMSAS bgd. selection expression = annulus(34287.324000, 27822.012000, 2022.020058, 4044.040116, X, Y) && !ellipse(33525.784485, 29448.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33956.363861, 26327.631012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34992.789062, 26396.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33618.809924, 30278.788093, 1457.105571, 971.299097, 110.464354, X, Y) && !ellipse(34508.424103, 29981.957581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33659.366000, 30100.127600, 1660.824048, 1660.824048, 0.000000, X, Y) && !ellipse(34699.671173, 29452.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33973.903600, 28761.956000, 1603.520046, 1603.520046, 0.000000, X, Y) && !ellipse(34050.179321, 25866.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33359.847809, 32149.815552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34601.697937, 30977.705078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35985.052000, 26507.549800, 1647.688047, 1647.688047, 0.000000, X, Y) && !ellipse(34333.826721, 24318.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35567.594000, 28063.250000, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(34457.454000, 25493.692000, 1215.920035, 1215.920035, 0.000000, X, Y) && !ellipse(34753.929352, 23531.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34707.288452, 25775.090210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34560.756000, 24572.182000, 3038.984087, 3038.984087, 0.000000, X, Y) && !ellipse(34343.488373, 24738.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.594000, 23848.756000, 1632.184047, 1632.184047, 0.000000, X, Y)
[Sat Dec 17 17:07:07 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src5.gif
[Sat Dec 17 17:19:20 2011] Mean detx,y = (-529.33, 7257.80) 
[Sat Dec 17 17:19:21 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:19:44 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:19:44 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Dec 17 17:19:44 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Dec 17 23:21:56 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:56 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Dec 17 23:22:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:00 2011] Using photon index=1.80, rate=0.0848, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src5.arf
[Sat Dec 17 23:22:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:00 2011] Updating source flux to 1.1e-12
[Sat Dec 17 23:22:17 2011] Flag c found in src. 5 procflags, skipping spectral fitting