[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (394.5, 292.2) = 5 34 5.42 21 58 52.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 165.4 +/- 23.2
  Background counts = 125.8
  Rate = 0.04 +/- 0.006

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 6.98'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 9.92 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 9.92"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.3, npix_max = 30, mask sum = 29, frac = 0.938
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 9.92"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src43.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src43.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src43_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src43.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Fri Dec 16 16:12:30 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Fri Dec 16 22:06:40 2011] Warning, spatial fit 43 centroid is now closest to src. 8
[Fri Dec 16 22:06:40 2011] Spatial fit model total counts = 2416.450000, observed total counts = 2418.000000
[Fri Dec 16 22:06:40 2011] Offset between fit and detection position for source 46 = 3.426080 pixels
[Fri Dec 16 22:06:40 2011] Warning, changing simple spatial fit ID from 43 to 60
[Fri Dec 16 22:06:40 2011] 2286.949000 total counts/ 1783.090000 bgd. counts: snr = 11.932251
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 3.426080 pixels
  Position = (397.9, 292.6) = 5 34 4.36 21 58 54.4
  Extent = 19.7 (18.7-20.2)", rotation angle = 0
  Source counts = 503.9 +/- 47.8
  Background counts = 1783.1
  Rate = 0.1 +/- 0.009
[Fri Dec 16 22:06:40 2011] Spatial fit model total counts = 2181.510000, observed total counts = 2169.000000
[Fri Dec 16 22:06:40 2011] Offset between fit and detection position for source 46 = 2.176145 pixels
[Fri Dec 16 22:06:40 2011] Warning, changing simple spatial fit ID from 60 to 61
[Fri Dec 16 22:06:40 2011] 2093.574000 total counts/ 1373.850000 bgd. counts: snr = 19.417635
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 2.176145 pixels
  Position = (397.1, 294.6) = 5 34 4.61 21 59 3.2
  Extent = 20.2 (20.2-40.5)", rotation angle = 0
  Source counts = 719.7 +/- 45.8
  Background counts = 1373.8
  Rate = 0.1 +/- 0.009
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 7
[Fri Dec 16 22:07:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 20.23"
[Fri Dec 16 22:07:05 2011] source mask rpix=4.7, npix_max = 106, mask sum = 109, frac = 1.027
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 42 for pass 1, mean size = 20.23"
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src42.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src42.csv
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src42_1.ximg exists
[Sat Dec 17 06:58:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src42.csv
[Sat Dec 17 06:58:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:58:26 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Sat Dec 17 06:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Dec 17 06:58:26 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Sat Dec 17 06:58:26 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src42.csv
[Sat Dec 17 06:58:26 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 42 centroid is now closest to src. 65
[Sat Dec 17 17:06:36 2011] Spatial fit model total counts = 3256.440000, observed total counts = 3247.000000
[Sat Dec 17 17:06:36 2011] Offset between fit and detection position for source 46 = 1.104237 pixels
[Sat Dec 17 17:06:36 2011] Warning, changing simple spatial fit ID from 42 to 57
[Sat Dec 17 17:06:36 2011] 3040.260000 total counts/ 2572.440000 bgd. counts: snr = 9.223721
Spatial fit parameters:
  Offset between fit and detection position for source 46 = 1.104237 pixels
  Position = (396.6, 293.6) = 5 34 4.76 21 58 58.9
  Extent = 15.2 (12.8-19.4)", rotation angle = 0
  Source counts = 467.8 +/- 55.1
  Background counts = 2572.4
  Rate = 0.09 +/- 0.01
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:09 2011] XMMSAS src. selection expression = ellipse(34457.454000, 25493.692000, 911.940026, 911.940026, 0.000000, X, Y)
[Sat Dec 17 17:07:09 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src46_src.reg
[Sat Dec 17 17:07:09 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (344, 241) - (449, 346)
[Sat Dec 17 17:07:09 2011] XMMSAS bgd. selection expression = annulus(34457.454000, 25493.692000, 1519.900044, 3039.800087, X, Y) && !ellipse(34287.324000, 27822.012000, 1617.616047, 1617.616047, 0.000000, X, Y) && !ellipse(33956.363861, 26327.631012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34992.789062, 26396.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33659.366000, 30100.127600, 1660.824048, 1660.824048, 0.000000, X, Y) && !ellipse(33973.903600, 28761.956000, 1603.520046, 1603.520046, 0.000000, X, Y) && !ellipse(34050.179321, 25866.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35985.052000, 26507.549800, 1647.688047, 1647.688047, 0.000000, X, Y) && !ellipse(34333.826721, 24318.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35567.594000, 28063.250000, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(34793.961884, 22745.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34753.929352, 23531.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34707.288452, 25775.090210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34560.756000, 24572.182000, 3038.984087, 3038.984087, 0.000000, X, Y) && !ellipse(34343.488373, 24738.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.594000, 23848.756000, 1632.184047, 1632.184047, 0.000000, X, Y)
[Sat Dec 17 17:07:09 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src46.gif
[Sat Dec 17 17:34:23 2011] Mean detx,y = (-2789.21, 7116.43) 
[Sat Dec 17 17:34:23 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:34:34 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:34:35 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Dec 17 17:34:35 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Sat Dec 17 23:21:58 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:58 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Sat Dec 17 23:22:03 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:03 2011] Using photon index=1.80, rate=0.0891, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src46.arf
[Sat Dec 17 23:22:03 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:03 2011] Updating source flux to 1.3e-12
[Sat Dec 17 23:22:18 2011] Flag c found in src. 46 procflags, skipping spectral fitting