[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (292.4, 479.9) = 5 34 37.36 22 12 31.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 121.3 +/- 18.1
  Background counts = 50.9
  Rate = 0.02 +/- 0.003

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 13.17'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 13.01"
[Fri Dec 16 13:07:28 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 27 for pass 0, mean size = 13.01"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src27.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src27.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src27.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri Dec 16 16:12:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri Dec 16 16:12:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri Dec 16 16:12:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:40 2011] Warning, spatial fit 27 centroid is now closest to src. 31
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 31
[Fri Dec 16 22:06:40 2011] Source is confused with source 32
[Fri Dec 16 22:06:40 2011] Source is confused with source 47
[Fri Dec 16 22:06:40 2011] Source is confused with source 48
[Fri Dec 16 22:07:05 2011] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 13.01"
[Fri Dec 16 22:07:05 2011] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 26 for pass 1, mean size = 13.01"
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src26.ximg exists
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src26_1.ximg exists
[Sat Dec 17 06:58:24 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src26 appears to have run properly
[Sat Dec 17 06:58:26 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sat Dec 17 06:58:26 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sat Dec 17 06:58:26 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 26 centroid is now closest to src. 32
[Sat Dec 17 17:06:36 2011] Source 29 is offset by 5.080543 and 6.741193 pixels which is larger than
2 X fitted extent = 1.664800 x 6.753839, not incorporating fit results
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:08 2011] XMMSAS src. selection expression = ellipse(25389.285248, 41706.829803, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src29_src.reg
[Sat Dec 17 17:07:08 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (255, 442) - (330, 517)
[Sat Dec 17 17:07:08 2011] XMMSAS bgd. selection expression = annulus(25389.285248, 41706.829803, 1087.500000, 2175.000000, X, Y) && !ellipse(25523.528839, 40321.512512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25299.608978, 42392.023834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25861.129089, 41880.874939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25715.892000, 41321.340000, 2059.216059, 2059.216059, 0.000000, X, Y) && !ellipse(25957.490723, 40065.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.386200, 39144.840000, 1924.168055, 1924.168055, 0.000000, X, Y) && !ellipse(25808.796000, 38422.762000, 1215.928035, 1215.928035, 0.000000, X, Y) && !ellipse(25362.793000, 42888.450000, 2185.408063, 2185.408063, 0.000000, X, Y) && !ellipse(24984.622000, 41465.900000, 1094.632031, 1094.632031, 0.000000, X, Y) && !ellipse(26108.567200, 40666.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26103.549194, 39280.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25219.498000, 43918.708400, 2239.032064, 2239.032064, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src29.gif
[Sat Dec 17 17:30:45 2011] Mean detx,y = (14313.15, -30.90) 
[Sat Dec 17 17:30:45 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:30:52 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:30:52 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 17 17:30:52 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Dec 17 18:43:09 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 18:43:09 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:21:57 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:57 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 17 23:22:01 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:01 2011] Using photon index=1.80, rate=0.0231, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src29.arf
[Sat Dec 17 23:22:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:01 2011] Updating source flux to 6.2e-13
[Sat Dec 17 23:22:18 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting