[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (395.2, 280.1) = 5 34 5.21 21 57 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.6 +/- 21.0
  Background counts = 117.7
  Rate = 0.05 +/- 0.006

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 7.14'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 10.00"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.830
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 26 for pass 0, mean size = 10.00"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src26.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src26.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src26_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src26.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Fri Dec 16 16:12:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Fri Dec 16 16:12:30 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src26.csv
[Fri Dec 16 16:12:30 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:40 2011] Warning, spatial fit 26 centroid is now closest to src. 65
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 66
[Fri Dec 16 22:06:40 2011] Source is confused with source 68
[Fri Dec 16 22:07:05 2011] Using EEF radius (= 10.00 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 10.00"
[Fri Dec 16 22:07:05 2011] source mask rpix=2.3, npix_max = 31, mask sum = 26, frac = 0.830
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 10.00"
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src25.ximg exists
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Dec 17 06:58:24 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src25 appears to have run properly
[Sat Dec 17 06:58:26 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Dec 17 06:58:26 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Dec 17 06:58:26 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 25 centroid is now closest to src. 66
[Sat Dec 17 17:06:36 2011] Source 28 is offset by 9.370951 and 1.366030 pixels which is larger than
2 X fitted extent = 9.171770 x 9.171770, not incorporating fit results
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:08 2011] XMMSAS src. selection expression = ellipse(34333.826721, 24318.352631, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src28_src.reg
[Sat Dec 17 17:07:08 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (358, 243) - (433, 318)
[Sat Dec 17 17:07:08 2011] XMMSAS bgd. selection expression = annulus(34333.826721, 24318.352631, 1087.500000, 2175.000000, X, Y) && !ellipse(34287.324000, 27822.012000, 1617.616047, 1617.616047, 0.000000, X, Y) && !ellipse(33956.363861, 26327.631012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34992.789062, 26396.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.179321, 25866.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35985.052000, 26507.549800, 1647.688047, 1647.688047, 0.000000, X, Y) && !ellipse(34457.454000, 25493.692000, 1215.920035, 1215.920035, 0.000000, X, Y) && !ellipse(34793.961884, 22745.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34753.929352, 23531.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34707.288452, 25775.090210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34560.756000, 24572.182000, 3038.984087, 3038.984087, 0.000000, X, Y) && !ellipse(34343.488373, 24738.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.594000, 23848.756000, 1632.184047, 1632.184047, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src28.gif
[Sat Dec 17 17:30:33 2011] Mean detx,y = (-3973.73, 6936.04) 
[Sat Dec 17 17:30:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:30:42 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:30:42 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Dec 17 17:30:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Dec 17 18:43:03 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 18:43:03 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:21:57 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:57 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Dec 17 23:22:01 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:01 2011] Using photon index=1.80, rate=0.0527, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src28.arf
[Sat Dec 17 23:22:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:01 2011] Updating source flux to 8.7e-13
[Sat Dec 17 23:22:18 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting