[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (392.0, 333.0) = 5 34 6.20 22 1 48.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.1 +/- 25.7
  Background counts = 150.4
  Rate = 0.06 +/- 0.006

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 7.23'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 10.04 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 10.04"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.3, npix_max = 31, mask sum = 34, frac = 1.077
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 18 for pass 0, mean size = 10.04"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src18.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src18.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src18.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Dec 16 16:12:30 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Fri Dec 16 22:06:40 2011] Spatial fit model total counts = 2304.340000, observed total counts = 2315.000000
[Fri Dec 16 22:06:40 2011] Offset between fit and detection position for source 20 = 2.097346 pixels
[Fri Dec 16 22:06:40 2011] 2090.563000 total counts/ 255.813000 bgd. counts: snr = 114.713780
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 2.097346 pixels
  Position = (391.1, 331.2) = 5 34 6.49 22 1 42.4
  Extent = 20.0 (20.0-20.1)", rotation angle = 0
  Source counts = 1834.8 +/- 45.7
  Background counts = 255.8
  Rate = 0.3 +/- 0.009
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 4
[Fri Dec 16 22:07:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 20.04"
[Fri Dec 16 22:07:05 2011] source mask rpix=4.6, npix_max = 104, mask sum = 65, frac = 0.623
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 17 for pass 1, mean size = 20.04"
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src17.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src17.csv
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src17_1.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src17.csv
[Sat Dec 17 06:58:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sat Dec 17 06:58:25 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 17 centroid is now closest to src. 45
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:08 2011] Counts = 1834.750000, rescaling region sizes by 2.000000
[Sat Dec 17 17:07:08 2011] XMMSAS src. selection expression = ellipse(33973.903600, 28761.956000, 2405.280069, 2405.280069, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src20_src.reg
[Sat Dec 17 17:07:08 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (253, 193) - (529, 469)
[Sat Dec 17 17:07:08 2011] XMMSAS bgd. selection expression = annulus(33973.903600, 28761.956000, 8017.600231, 16035.200461, X, Y) && !ellipse(27355.342000, 34652.845720, 1779.752051, 1779.752051, 0.000000, X, Y) && !ellipse(26520.824000, 34621.186000, 1641.112047, 1641.112047, 0.000000, X, Y) && !ellipse(24437.878000, 34129.064200, 1587.160046, 1587.160046, 0.000000, X, Y) && !ellipse(33525.784485, 29448.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34287.324000, 27822.012000, 1617.616047, 1617.616047, 0.000000, X, Y) && !ellipse(33956.363861, 26327.631012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34992.789062, 26396.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31004.911163, 34921.905090, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26350.286000, 34549.140000, 1646.960047, 1646.960047, 0.000000, X, Y) && !ellipse(28484.487220, 34636.296400, 889.832026, 889.832026, 0.000000, X, Y) && !ellipse(27607.533020, 34552.508209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25887.044800, 34378.449200, 1362.800039, 1362.800039, 0.000000, X, Y) && !ellipse(33618.809924, 30278.788093, 1457.105571, 971.299097, 110.464354, X, Y) && !ellipse(34508.424103, 29981.957581, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33659.366000, 30100.127600, 1660.824048, 1660.824048, 0.000000, X, Y) && !ellipse(34699.671173, 29452.542084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34050.179321, 25866.500214, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25523.528839, 40321.512512, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33359.847809, 32149.815552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34601.697937, 30977.705078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35985.052000, 26507.549800, 1647.688047, 1647.688047, 0.000000, X, Y) && !ellipse(34333.826721, 24318.352631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25389.285248, 41706.829803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25299.608978, 42392.023834, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25861.129089, 41880.874939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25715.892000, 41321.340000, 2059.216059, 2059.216059, 0.000000, X, Y) && !ellipse(25957.490723, 40065.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.386200, 39144.840000, 1924.168055, 1924.168055, 0.000000, X, Y) && !ellipse(25808.796000, 38422.762000, 1215.928035, 1215.928035, 0.000000, X, Y) && !ellipse(26078.475098, 37441.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 37107.458832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.137909, 36567.879883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.100739, 36063.010132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.520630, 35615.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25567.820038, 35184.798126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30445.764648, 34876.474884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.998672, 30792.869904, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35567.594000, 28063.250000, 1106.928032, 1106.928032, 0.000000, X, Y) && !ellipse(34457.454000, 25493.692000, 1215.920035, 1215.920035, 0.000000, X, Y) && !ellipse(25362.793000, 42888.450000, 2185.408063, 2185.408063, 0.000000, X, Y) && !ellipse(24984.622000, 41465.900000, 1094.632031, 1094.632031, 0.000000, X, Y) && !ellipse(26108.567200, 40666.204346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26103.549194, 39280.595001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25355.404419, 38075.017883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.738403, 35969.470795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.954468, 35840.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.895355, 35710.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31710.078000, 35239.618000, 1741.176050, 1741.176050, 0.000000, X, Y) && !ellipse(29088.651733, 34773.719940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.970978, 34186.153992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34793.961884, 22745.529205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34068.169800, 33002.900360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33145.257721, 33085.668243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34753.929352, 23531.125824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34707.288452, 25775.090210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34560.756000, 24572.182000, 3038.984087, 3038.984087, 0.000000, X, Y) && !ellipse(34343.488373, 24738.303925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35088.594000, 23848.756000, 1632.184047, 1632.184047, 0.000000, X, Y) && !ellipse(25219.498000, 43918.708400, 2239.032064, 2239.032064, 0.000000, X, Y) && !ellipse(34834.745789, 20762.284714, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src20.gif
[Sat Dec 17 17:23:01 2011] Mean detx,y = (464.95, 7536.03) 
[Sat Dec 17 17:23:02 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:29:16 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:29:16 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Dec 17 17:29:16 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Sat Dec 17 23:21:57 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:57 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src20_src_b10.pi.gz
[Sat Dec 17 23:22:01 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:01 2011] Using photon index=1.80, rate=0.35, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src20.arf
[Sat Dec 17 23:22:01 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:01 2011] Updating source flux to 5.7e-12
[Sat Dec 17 23:22:17 2011] Flag c found in src. 20 procflags, skipping spectral fitting