[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (297.1, 395.5) = 5 34 35.88 22 6 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 225.5 +/- 23.5
  Background counts = 171.8
  Rate = 0.07 +/- 0.007

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 7.03'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 9.95 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 9.95"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.3, npix_max = 31, mask sum = 27, frac = 0.869
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 9.95"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src13.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src13.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src13.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Dec 16 16:12:30 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Dec 16 16:12:30 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Fri Dec 16 22:06:40 2011] Spatial fit model total counts = 2535.640000, observed total counts = 2528.000000
[Fri Dec 16 22:06:40 2011] Offset between fit and detection position for source 13 = 1.008241 pixels
[Fri Dec 16 22:06:40 2011] 2511.315000 total counts/ 1625.730000 bgd. counts: snr = 21.963727
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.008241 pixels
  Position = (298.1, 395.7) = 5 34 35.57 22 6 23.3
  Extent = 17.0 (17.0-17.2)", rotation angle = 0
  Source counts = 885.6 +/- 50.1
  Background counts = 1625.7
  Rate = 0.2 +/- 0.01
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 3
[Fri Dec 16 22:07:05 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 17.04"
[Fri Dec 16 22:07:05 2011] source mask rpix=3.9, npix_max = 78, mask sum = 57, frac = 0.731
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 17.04"
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src13.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src13.csv
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src13.csv
[Sat Dec 17 06:58:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Dec 17 06:58:25 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 13 centroid is now closest to src. 12
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:07 2011] XMMSAS src. selection expression = ellipse(25887.044800, 34378.449200, 1022.100029, 1022.100029, 0.000000, X, Y)
[Sat Dec 17 17:07:07 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src13_src.reg
[Sat Dec 17 17:07:07 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (239, 337) - (357, 454)
[Sat Dec 17 17:07:08 2011] XMMSAS bgd. selection expression = annulus(25887.044800, 34378.449200, 1703.500049, 3407.000098, X, Y) && !ellipse(27355.342000, 34652.845720, 1779.752051, 1779.752051, 0.000000, X, Y) && !ellipse(26520.824000, 34621.186000, 1641.112047, 1641.112047, 0.000000, X, Y) && !ellipse(24437.878000, 34129.064200, 1587.160046, 1587.160046, 0.000000, X, Y) && !ellipse(26350.286000, 34549.140000, 1646.960047, 1646.960047, 0.000000, X, Y) && !ellipse(28484.487220, 34636.296400, 889.832026, 889.832026, 0.000000, X, Y) && !ellipse(27607.533020, 34552.508209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25656.386200, 39144.840000, 1924.168055, 1924.168055, 0.000000, X, Y) && !ellipse(25808.796000, 38422.762000, 1215.928035, 1215.928035, 0.000000, X, Y) && !ellipse(26078.475098, 37441.944733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25648.293976, 37107.458832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25991.137909, 36567.879883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26165.100739, 36063.010132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26331.520630, 35615.789032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25567.820038, 35184.798126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25355.404419, 38075.017883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26738.738403, 35969.470795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.954468, 35840.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25902.895355, 35710.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29088.651733, 34773.719940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23835.970978, 34186.153992, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 17:07:08 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src13.gif
[Sat Dec 17 17:21:27 2011] Mean detx,y = (7235.69, -309.94) 
[Sat Dec 17 17:21:28 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:21:45 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:21:45 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec 17 17:21:45 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Dec 17 23:21:56 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:56 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Dec 17 23:22:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:00 2011] Using photon index=1.80, rate=0.169, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src13.arf
[Sat Dec 17 23:22:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:00 2011] Updating source flux to 2.6e-12
[Sat Dec 17 23:22:17 2011] Flag c found in src. 13 procflags, skipping spectral fitting