[Wed May 29 12:13:16 2013] Detection parameters:
  Position = (390.2, 293.2) = 5 34 7.95 21 59 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 631.3 +/- 40.8
  Background counts = 631.4
  Rate = 0.05 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 6.66'
[Wed May 29 12:14:08 2013] Using EEF radius (= 9.76 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 9.76"
[Wed May 29 12:14:08 2013] source mask rpix=2.2, npix_max = 30, mask sum = 18, frac = 0.598
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.76"
[Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src25.ximg exists
[Wed May 29 12:14:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src25.csv
[Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src25_1.ximg exists
[Wed May 29 12:14:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src25.csv
[Wed May 29 12:14:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Wed May 29 12:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Wed May 29 12:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src25.csv
[Wed May 29 12:14:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 11941.600000, observed total counts = 6057.000000
[Wed May 29 12:15:04 2013] Poor agreement between spatial fit and data for source 90
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:15:04 2013] Source 90 is offset by 5.532449 and -0.169680 pixels which is larger than
2 X fitted extent = 5.516092 x 5.516092, not incorporating fit results
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 8292.510000, observed total counts = 8291.000000
[Wed May 29 12:15:04 2013] Offset between fit and detection position for source 90 = 6.565830 pixels
[Wed May 29 12:15:04 2013] Warning, changing simple spatial fit ID from 25 to 88
[Wed May 29 12:15:04 2013] 8139.612000 total counts/ 7686.260000 bgd. counts: snr = 5.171041
Spatial fit parameters:
  Offset between fit and detection position for source 90 = 6.565830 pixels
  Position = (396.6, 292.1) = 5 34 5.93 21 59 5.2
  Extent = 20.5 (20.4-40.9)", rotation angle = 0
  Source counts = 453.4 +/- 90.2
  Background counts = 7686.3
  Rate = 0.02 +/- 0.005
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 89
[Wed May 29 12:15:04 2013] Source is confused with source 94
[Wed May 29 12:15:04 2013] Source is confused with source 93
[Wed May 29 12:15:04 2013] Source is confused with source 92
[Wed May 29 12:15:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 20.45"
[Wed May 29 12:15:33 2013] source mask rpix=4.7, npix_max = 108, mask sum = 110, frac = 1.017
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 20.45"
[Wed May 29 12:15:34 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src23.ximg exists
[Wed May 29 12:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src23.csv
[Wed May 29 12:15:34 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed May 29 12:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src23.csv
[Wed May 29 12:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:37 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed May 29 12:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed May 29 12:15:37 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed May 29 12:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed May 29 12:15:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:28 2013] Warning, spatial fit 23 centroid is now closest to src. 94
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:25 2013] XMMSAS src. selection expression = ellipse(34458.388000, 25364.994000, 1227.018035, 1227.018035, 0.000000, X, Y)
[Wed May 29 15:26:25 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src.reg
[Wed May 29 15:26:25 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (326, 222) - (467, 363)
[Wed May 29 15:26:25 2013] XMMSAS bgd. selection expression = annulus(34458.388000, 25364.994000, 2045.030059, 4090.060118, X, Y) && !ellipse(34064.999695, 28314.415985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.372000, 20763.308000, 2995.616086, 2995.616086, 0.000000, X, Y) && !ellipse(34049.568665, 28929.655304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.087158, 27086.799469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34118.243652, 26135.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33753.052338, 24045.471375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34379.721558, 29925.684235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35160.897552, 30318.963104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.887451, 24838.802094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34121.809357, 23268.960266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33893.275055, 22749.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34615.290000, 29348.380000, 1663.544048, 789.896823, 6.446000, X, Y) && !ellipse(34965.545807, 24856.102264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35121.595154, 25270.727570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34600.675751, 23004.240570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33908.618469, 22034.135345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34871.069244, 23976.090149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35613.009216, 27097.708984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.966553, 28561.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34012.013275, 21616.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35685.660000, 29765.700000, 1711.272049, 1711.272049, 0.000000, X, Y)
[Wed May 29 15:26:25 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90.gif
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_bgd.evt exist, delete to re-create
[Wed May 29 15:26:33 2013] Mean detx,y = (-7458.83, -1684.56) 
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_bgd.img exist, delete to re-create
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_bgd.pi exist, delete to re-create
[Wed May 29 15:26:33 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src_b10.pi.gz
[Wed May 29 15:26:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_bgd.pi.gz
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_bgd.lc exist, delete to re-create
[Wed May 29 17:52:23 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:23 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_src_b10.pi.gz = 18939.00
[Wed May 29 17:52:23 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_bgd.pi.gz = 30182.00
[Wed May 29 17:52:23 2013] Got source and background scale factors 3972741.000000, 13529539.000000
[Wed May 29 17:52:23 2013] User source parameters:
  Position = (396.6, 292.1) = 5 34 5.93 21 59 5.2
  Extent = 20.5 (20.4-40.9)", rotation angle = 0
  Source aperture counts = 10076.5 +/- 138.6
  Background aperture counts = 8862.5
  Rate = 0.5 +/- 0.007

[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0238, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 4.3e-13
[Wed May 29 17:53:07 2013] Flag b found in src. 90 procflags, skipping spectral fitting
[Wed May 29 17:53:07 2013] Flag p found in src. 90 procflags, skipping spectral fitting
[Wed May 29 17:53:07 2013] Flag c found in src. 90 procflags, skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src90_pl.csv not found, spectral fit skipped or did not complete