[Wed May 29 12:13:14 2013] Detection parameters:
  Position = (402.9, 359.0) = 5 34 3.94 22 3 57.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 332.2 +/- 36.3
  Background counts = 414.3
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 8.76'
[Wed May 29 12:14:08 2013] Using EEF radius (= 10.81 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 10.81"
[Wed May 29 12:14:08 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 10.81"
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src62.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src62.csv
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src62_1.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src62.csv
[Wed May 29 12:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Wed May 29 12:14:13 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Wed May 29 12:15:04 2013] Source 63 is offset by -1.500553 and 4.531765 pixels which is larger than
2 X fitted extent = 1.179963 x 1.179963, not incorporating fit results
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 5771.450000, observed total counts = 5788.000000
[Wed May 29 12:15:04 2013] Offset between fit and detection position for source 63 = 3.168730 pixels
[Wed May 29 12:15:04 2013] Warning, changing simple spatial fit ID from 62 to 49
[Wed May 29 12:15:04 2013] 5564.657000 total counts/ 5258.510000 bgd. counts: snr = 4.221810
Spatial fit parameters:
  Offset between fit and detection position for source 63 = 3.168730 pixels
  Position = (399.9, 359.8) = 5 34 4.89 22 3 59.8
  Extent = 21.4 (21.3-42.8)", rotation angle = 0
  Source counts = 306.1 +/- 74.6
  Background counts = 5258.5
  Rate = 0.02 +/- 0.004
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 65
[Wed May 29 12:15:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 21.39"
[Wed May 29 12:15:33 2013] source mask rpix=4.9, npix_max = 117, mask sum = 120, frac = 1.022
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 21.39"
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src60.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src60.csv
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src60_1.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src60.csv
[Wed May 29 12:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Wed May 29 12:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src60.csv
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Wed May 29 12:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src60.csv
[Wed May 29 12:15:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:29 2013] Warning, spatial fit 60 centroid is now closest to src. 71
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:27 2013] XMMSAS src. selection expression = ellipse(34741.958000, 31257.136000, 1283.454037, 1283.454037, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src.reg
[Wed May 29 15:26:27 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (326, 286) - (474, 434)
[Wed May 29 15:26:27 2013] XMMSAS bgd. selection expression = annulus(34741.958000, 31257.136000, 2139.090062, 4278.180123, X, Y) && !ellipse(29244.453785, 34302.595786, 1799.256052, 514.009131, 2.954665, X, Y) && !ellipse(31213.834000, 35049.444000, 1694.616049, 1694.616049, 0.000000, X, Y) && !ellipse(34064.999695, 28314.415985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34458.388000, 25364.994000, 1636.024047, 1636.024047, 0.000000, X, Y) && !ellipse(34049.568665, 28929.655304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.087158, 27086.799469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.244995, 34169.568024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34118.243652, 26135.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.851600, 34065.740600, 1738.032050, 454.459213, 359.878807, X, Y) && !ellipse(34379.721558, 29925.684235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34327.648468, 30848.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35160.897552, 30318.963104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.602000, 34006.780000, 794.401623, 794.401623, 0.000000, X, Y) && !ellipse(30097.000000, 34740.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34615.290000, 29348.380000, 1663.544048, 789.896823, 6.446000, X, Y) && !ellipse(34897.292969, 32229.700073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29793.389435, 34831.315491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.201080, 34117.279877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.262390, 34677.525574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35258.629181, 31621.016022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35613.009216, 27097.708984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.966553, 28561.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34298.794000, 32527.976000, 1759.712051, 1759.712051, 0.000000, X, Y) && !ellipse(35685.660000, 29765.700000, 1711.272049, 1711.272049, 0.000000, X, Y) && !ellipse(33663.997345, 34016.091400, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63.gif
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_bgd.evt exist, delete to re-create
[Wed May 29 15:26:34 2013] Mean detx,y = (-7470.87, 4155.40) 
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_bgd.img exist, delete to re-create
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_bgd.pi exist, delete to re-create
[Wed May 29 15:26:34 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src_b10.pi.gz
[Wed May 29 15:26:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_bgd.pi.gz
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_bgd.lc exist, delete to re-create
[Wed May 29 17:52:29 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:29 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_src_b10.pi.gz = 12562.00
[Wed May 29 17:52:29 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_bgd.pi.gz = 24225.00
[Wed May 29 17:52:29 2013] Got source and background scale factors 4028533.000000, 16050240.000000
[Wed May 29 17:52:29 2013] User source parameters:
  Position = (399.9, 359.8) = 5 34 4.89 22 3 59.8
  Extent = 21.4 (21.3-42.8)", rotation angle = 0
  Source aperture counts = 6481.6 +/- 113.1
  Background aperture counts = 6080.4
  Rate = 0.3 +/- 0.006

[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0161, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 3.3e-13
[Wed May 29 17:53:07 2013] Flag b found in src. 63 procflags, skipping spectral fitting
[Wed May 29 17:53:07 2013] Flag c found in src. 63 procflags, skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src63_pl.csv not found, spectral fit skipped or did not complete