[Wed May 29 12:13:14 2013] Detection parameters:
  Position = (371.2, 392.7) = 5 34 13.86 22 6 13.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 356.4 +/- 28.9
  Background counts = 392.1
  Rate = 0.02 +/- 0.002

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 8.63'
[Wed May 29 12:14:08 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Wed May 29 12:14:08 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.850
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 10.75"
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src90.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src90.csv
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src90_1.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src90.csv
[Wed May 29 12:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:14 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Wed May 29 12:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.csv
[Wed May 29 12:14:14 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Wed May 29 12:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.csv
[Wed May 29 12:14:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Warning, spatial fit 90 centroid is now closest to src. 50
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 50
[Wed May 29 12:15:33 2013] Using EEF radius (= 10.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 10.75"
[Wed May 29 12:15:33 2013] source mask rpix=2.5, npix_max = 35, mask sum = 30, frac = 0.850
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 86 for pass 1, mean size = 10.75"
[Wed May 29 12:15:36 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src86.ximg exists
[Wed May 29 12:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src86.csv
[Wed May 29 12:15:36 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src86_1.ximg exists
[Wed May 29 12:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src86.csv
[Wed May 29 12:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:39 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src86.ximg exists
[Wed May 29 12:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src86.csv
[Wed May 29 12:15:39 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src86_1.ximg exists
[Wed May 29 12:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src86.csv
[Wed May 29 12:15:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:29 2013] Spatial fit model total counts = 4892.440000, observed total counts = 4263.000000
[Wed May 29 12:16:29 2013] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:16:29 2013] Warning, spatial fit 86 centroid is now closest to src. 53
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:29 2013] XMMSAS src. selection expression = ellipse(32246.201080, 34117.279877, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 15:26:29 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src.reg
[Wed May 29 15:26:29 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (334, 355) - (409, 430)
[Wed May 29 15:26:29 2013] XMMSAS bgd. selection expression = annulus(32246.201080, 34117.279877, 1087.500000, 2175.000000, X, Y) && !ellipse(29244.453785, 34302.595786, 1799.256052, 514.009131, 2.954665, X, Y) && !ellipse(31213.834000, 35049.444000, 1694.616049, 1694.616049, 0.000000, X, Y) && !ellipse(31588.244995, 34169.568024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.851600, 34065.740600, 1738.032050, 454.459213, 359.878807, X, Y) && !ellipse(34741.958000, 31257.136000, 1711.272049, 1711.272049, 0.000000, X, Y) && !ellipse(30737.602000, 34006.780000, 794.401623, 794.401623, 0.000000, X, Y) && !ellipse(29268.083923, 35005.575684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30097.000000, 34740.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34897.292969, 32229.700073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29793.389435, 34831.315491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.262390, 34677.525574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35258.629181, 31621.016022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34298.794000, 32527.976000, 1759.712051, 1759.712051, 0.000000, X, Y) && !ellipse(33663.997345, 34016.091400, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:29 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51.gif
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_bgd.evt exist, delete to re-create
[Wed May 29 15:26:35 2013] Mean detx,y = (-4643.75, 7034.60) 
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_bgd.img exist, delete to re-create
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_bgd.pi exist, delete to re-create
[Wed May 29 15:26:35 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Wed May 29 15:26:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_bgd.lc exist, delete to re-create
[Wed May 29 17:24:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 17:24:31 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:33 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:33 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_src_b10.pi.gz = 2821.00
[Wed May 29 17:52:34 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_bgd.pi.gz = 2916.00
[Wed May 29 17:52:34 2013] Got source and background scale factors 903418.000000, 1454160.000000
[Wed May 29 17:52:34 2013] User source parameters:
  Position = (371.2, 392.7) = 5 34 13.86 22 6 13.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1009.4 +/- 54.1
  Background aperture counts = 1811.6
  Rate = 0.05 +/- 0.003

[Wed May 29 17:52:34 2013] Updating counts from extracted products
[Wed May 29 17:52:34 2013] Set source signif. to 1009.39/42.56 = 23.72
[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.053, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 1.3e-12
[Wed May 29 17:53:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src51_pl.csv not found, spectral fit skipped or did not complete