[Wed May 29 12:13:12 2013] Detection parameters: Position = (323.2, 463.0) = 5 34 28.87 22 11 29.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1122.1 +/- 50.1 Background counts = 155.7 Rate = 0.06 +/- 0.003 [Wed May 29 12:13:18 2013] Off-axis axis estimate = 12.07' [Wed May 29 12:14:08 2013] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting [Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 12.46" [Wed May 29 12:14:08 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927 [Wed May 29 12:14:08 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 12.46" [Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src18.ximg exists [Wed May 29 12:14:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src18.csv [Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src18_1.ximg exists [Wed May 29 12:14:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src18.csv [Wed May 29 12:14:10 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src18_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists [Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists [Wed May 29 12:14:12 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly [Wed May 29 12:15:04 2013] Warning, spatial fit 18 centroid is now closest to src. 6 [Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000 [Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 12:15:04 2013] Assessing source extent using major [Wed May 29 12:15:04 2013] Source does appear to be extended [Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 12:15:04 2013] Source is confused with source 21 [Wed May 29 12:15:33 2013] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting [Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 12.46" [Wed May 29 12:15:33 2013] source mask rpix=2.9, npix_max = 45, mask sum = 42, frac = 0.927 [Wed May 29 12:15:33 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 12.46" [Wed May 29 12:15:34 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src16.ximg exists [Wed May 29 12:15:34 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src16_1.ximg exists [Wed May 29 12:15:34 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src16 appears to have run properly [Wed May 29 12:15:37 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src16.ximg exists [Wed May 29 12:15:37 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists [Wed May 29 12:15:37 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly [Wed May 29 12:16:28 2013] Spatial fit model total counts = 11530.300000, observed total counts = 11360.000000 [Wed May 29 12:16:28 2013] Offset between fit and detection position for source 5 = 0.161989 pixels [Wed May 29 12:16:28 2013] 10411.530000 total counts/ 8166.380000 bgd. counts: snr = 24.844518 Spatial fit parameters: Offset between fit and detection position for source 5 = 0.161989 pixels Position = (323.4, 463.1) = 5 34 28.82 22 11 29.1 Extent = 23.9 (21.9-24.9)", rotation angle = 0 Source counts = 2245.2 +/- 102.0 Background counts = 8166.4 Rate = 0.1 +/- 0.005 [Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000 [Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed May 29 12:16:29 2013] Assessing source extent using major axis lower bound [Wed May 29 12:16:29 2013] Source does appear to be extended [Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Wed May 29 15:26:25 2013] Counts = 2245.150000, rescaling region sizes by 2.000000 [Wed May 29 15:26:25 2013] XMMSAS src. selection expression = ellipse(28086.544000, 40239.562000, 2870.508083, 2870.508083, 0.000000, X, Y) [Wed May 29 15:26:25 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src.reg [Wed May 29 15:26:25 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (158, 298) - (488, 595) [Wed May 29 15:26:25 2013] XMMSAS bgd. selection expression = annulus(28086.544000, 40239.562000, 9568.360275, 19136.720551, X, Y) && !ellipse(27871.565063, 34520.963806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25549.574677, 35185.716766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.893921, 35659.918274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29244.453785, 34302.595786, 1799.256052, 514.009131, 2.954665, X, Y) && !ellipse(27909.186829, 36231.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.223633, 34396.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.730000, 35044.459000, 667.657619, 390.486411, 92.313000, X, Y) && !ellipse(27370.422000, 35650.304200, 1691.088049, 314.107209, 93.949000, X, Y) && !ellipse(24348.776611, 34500.196167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.337400, 41279.476000, 1048.824030, 1048.824030, 0.000000, X, Y) && !ellipse(20146.100204, 26055.445374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28091.409454, 39355.389832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.834000, 35049.444000, 1694.616049, 1694.616049, 0.000000, X, Y) && !ellipse(28175.974200, 37929.655600, 1507.528043, 1507.528043, 0.000000, X, Y) && !ellipse(27197.267273, 20261.603271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34064.999695, 28314.415985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28592.113464, 20251.526108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28248.207520, 42317.611328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.823730, 41617.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.668121, 34451.479034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34458.388000, 25364.994000, 1636.024047, 1636.024047, 0.000000, X, Y) && !ellipse(26344.609924, 20301.760590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.773636, 26570.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.372000, 20763.308000, 2995.616086, 2995.616086, 0.000000, X, Y) && !ellipse(27201.991400, 36565.818000, 991.680029, 991.680029, 0.000000, X, Y) && !ellipse(27986.798645, 36846.811951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34049.568665, 28929.655304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24919.756592, 35184.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.087158, 27086.799469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.244995, 34169.568024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19589.462800, 27204.194000, 1445.776042, 1445.776042, 0.000000, X, Y) && !ellipse(34118.243652, 26135.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33753.052338, 24045.471375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.851600, 34065.740600, 1738.032050, 454.459213, 359.878807, X, Y) && !ellipse(34379.721558, 29925.684235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28241.429230, 42744.625000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.576447, 43351.872681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26095.010620, 35122.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19844.275146, 28762.468109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19841.559200, 29327.129000, 455.764813, 455.764813, 0.000000, X, Y) && !ellipse(34327.648468, 30848.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35160.897552, 30318.963104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27348.821655, 36904.033142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.953461, 20518.083084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.239410, 38404.042389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27715.701569, 40492.339752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23829.867065, 34576.249481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.759888, 20353.985016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.800000, 20658.354000, 2872.752083, 2872.752083, 0.000000, X, Y) && !ellipse(34139.887451, 24838.802094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28517.661400, 44052.198000, 796.172023, 796.172023, 0.000000, X, Y) && !ellipse(23278.990967, 34574.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27423.866000, 39442.023000, 751.591222, 751.591222, 0.000000, X, Y) && !ellipse(34741.958000, 31257.136000, 1711.272049, 1711.272049, 0.000000, X, Y) && !ellipse(27757.754578, 41787.014343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30737.602000, 34006.780000, 794.401623, 794.401623, 0.000000, X, Y) && !ellipse(27607.668427, 41103.928406, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27432.816162, 37986.854980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34121.809357, 23268.960266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29268.083923, 35005.575684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30097.000000, 34740.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24341.485901, 20445.649902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27362.882820, 37429.926400, 615.208018, 615.208018, 0.000000, X, Y) && !ellipse(20153.064346, 31699.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20350.348953, 32228.168121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33893.275055, 22749.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.646149, 43541.712585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34615.290000, 29348.380000, 1663.544048, 789.896823, 6.446000, X, Y) && !ellipse(20432.958862, 27524.741241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34897.292969, 32229.700073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29793.389435, 34831.315491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20482.157883, 29971.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34965.545807, 24856.102264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32246.201080, 34117.279877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35121.595154, 25270.727570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20316.567688, 27011.239990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22004.335297, 20395.686234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34600.675751, 23004.240570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19716.889496, 23846.123810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20505.080078, 30405.089600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.262390, 34677.525574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22953.457825, 20233.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.664444, 24760.008789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33908.618469, 22034.135345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18898.900000, 30715.422000, 1557.432045, 1557.432045, 0.000000, X, Y) && !ellipse(20574.044464, 31277.096802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20507.566513, 29612.427948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35258.629181, 31621.016022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.866000, 25937.610000, 1445.776042, 1445.776042, 0.000000, X, Y) && !ellipse(34871.069244, 23976.090149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35613.009216, 27097.708984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19528.261612, 28865.363770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19832.112457, 32292.191498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20438.534424, 33028.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.966553, 28561.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22856.193481, 34682.782532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20696.410782, 30828.038422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34012.013275, 21616.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21225.235535, 20601.725800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.370667, 20579.089020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34298.794000, 32527.976000, 1759.712051, 1759.712051, 0.000000, X, Y) && !ellipse(35685.660000, 29765.700000, 1711.272049, 1711.272049, 0.000000, X, Y) && !ellipse(20161.827271, 24277.998840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21083.661407, 34789.047424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33663.997345, 34016.091400, 870.000000, 870.000000, 0.000000, X, Y) [Wed May 29 15:26:25 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5.gif [Wed May 29 15:26:32 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create [Wed May 29 15:26:32 2013] Mean detx,y = (-204.34, 12519.92) [Wed May 29 15:26:32 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create [Wed May 29 15:26:32 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create [Wed May 29 15:26:32 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src_b10.pi.gz [Wed May 29 15:26:32 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_bgd.pi.gz [Wed May 29 15:26:32 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create [Wed May 29 17:52:22 2013] Updating aperture counts using extracted products [Wed May 29 17:52:22 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 50506.00 [Wed May 29 17:52:22 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_bgd.pi.gz = 173559.00 [Wed May 29 17:52:22 2013] Got source and background scale factors 24764440.000000, 154586662.000000 [Wed May 29 17:52:22 2013] User source parameters: Position = (323.4, 463.1) = 5 34 28.82 22 11 29.1 Extent = 23.9 (21.9-24.9)", rotation angle = 0 Source aperture counts = 22702.2 +/- 225.7 Background aperture counts = 27803.8 Rate = 1 +/- 0.01 [Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00 [Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.118, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5.arf [Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass [Wed May 29 17:52:41 2013] Updating source flux to 3.5e-12 [Wed May 29 17:53:07 2013] Flag c found in src. 5 procflags, skipping spectral fitting [Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete