[Wed May 29 12:13:13 2013] Detection parameters:
  Position = (287.0, 405.0) = 5 34 40.22 22 7 17.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 511.9 +/- 34.1
  Background counts = 452.3
  Rate = 0.05 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 7.77'
[Wed May 29 12:14:08 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 10.31"
[Wed May 29 12:14:08 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.758
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 10.31"
[Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src33.ximg exists
[Wed May 29 12:14:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src33.csv
[Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed May 29 12:14:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src33.csv
[Wed May 29 12:14:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed May 29 12:14:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed May 29 12:14:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed May 29 12:14:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 6931.330000, observed total counts = 4137.000000
[Wed May 29 12:15:04 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:15:04 2013] Warning: source 24 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 33 at 10.767103 pixels away
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 5619.170000, observed total counts = 5071.000000
[Wed May 29 12:15:04 2013] Poor agreement between spatial fit and data for source 33
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 2
[Wed May 29 12:15:33 2013] Using EEF radius (= 10.31 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 10.31"
[Wed May 29 12:15:33 2013] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.758
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 10.31"
[Wed May 29 12:15:34 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src31.ximg exists
[Wed May 29 12:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src31.csv
[Wed May 29 12:15:34 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed May 29 12:15:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src31.csv
[Wed May 29 12:15:34 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:37 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed May 29 12:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed May 29 12:15:37 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed May 29 12:15:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed May 29 12:15:37 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:28 2013] Source 33 is offset by 1.008388 and 0.895245 pixels which is larger than
2 X fitted extent = 2.797380 x 0.767227, not incorporating fit results
[Wed May 29 12:16:29 2013] Warning, spatial fit 31 centroid is now closest to src. 2
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:26 2013] XMMSAS src. selection expression = ellipse(24919.756592, 35184.458282, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 15:26:26 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src.reg
[Wed May 29 15:26:26 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (249, 367) - (324, 442)
[Wed May 29 15:26:26 2013] XMMSAS bgd. selection expression = annulus(24919.756592, 35184.458282, 1087.500000, 2175.000000, X, Y) && !ellipse(27871.565063, 34520.963806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25549.574677, 35185.716766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.893921, 35659.918274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.186829, 36231.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.223633, 34396.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27370.422000, 35650.304200, 1691.088049, 314.107209, 93.949000, X, Y) && !ellipse(24348.776611, 34500.196167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28175.974200, 37929.655600, 1507.528043, 1507.528043, 0.000000, X, Y) && !ellipse(25137.668121, 34451.479034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.991400, 36565.818000, 991.680029, 991.680029, 0.000000, X, Y) && !ellipse(26095.010620, 35122.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27348.821655, 36904.033142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23829.867065, 34576.249481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23278.990967, 34574.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27432.816162, 37986.854980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27362.882820, 37429.926400, 615.208018, 615.208018, 0.000000, X, Y) && !ellipse(22856.193481, 34682.782532, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:26 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33.gif
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Wed May 29 15:26:33 2013] Mean detx,y = (2688.44, 7560.02) 
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Wed May 29 15:26:33 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Wed May 29 15:26:33 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed May 29 15:26:33 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Wed May 29 16:21:34 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 16:21:34 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:24 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:24 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_src_b10.pi.gz = 3451.00
[Wed May 29 17:52:25 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_bgd.pi.gz = 8639.00
[Wed May 29 17:52:25 2013] Got source and background scale factors 1111720.000000, 4010306.000000
[Wed May 29 17:52:25 2013] User source parameters:
  Position = (287.0, 405.0) = 5 34 40.22 22 7 17.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1056.1 +/- 59.8
  Background aperture counts = 2394.9
  Rate = 0.06 +/- 0.003

[Wed May 29 17:52:25 2013] Updating counts from extracted products
[Wed May 29 17:52:25 2013] Set source signif. to 1056.13/48.94 = 21.58
[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0555, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 1.3e-12
[Wed May 29 17:53:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete