[Wed May 29 12:13:13 2013] Detection parameters:
  Position = (314.9, 424.7) = 5 34 31.48 22 8 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 648.0 +/- 41.2
  Background counts = 418.9
  Rate = 0.03 +/- 0.002

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 9.23'
[Wed May 29 12:14:08 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Wed May 29 12:14:08 2013] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.893
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 50 for pass 0, mean size = 11.05"
[Wed May 29 12:14:10 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src50.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src50.csv
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src50_1.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src50.csv
[Wed May 29 12:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Wed May 29 12:14:13 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Wed May 29 12:15:04 2013] Warning, spatial fit 50 centroid is now closest to src. 11
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 28
[Wed May 29 12:15:33 2013] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 11.05"
[Wed May 29 12:15:33 2013] source mask rpix=2.5, npix_max = 36, mask sum = 33, frac = 0.893
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 11.05"
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src48.ximg exists
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src48_1.ximg exists
[Wed May 29 12:15:35 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src48 appears to have run properly
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Wed May 29 12:15:38 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Wed May 29 12:16:29 2013] Warning, spatial fit 48 centroid is now closest to src. 28
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:26 2013] XMMSAS src. selection expression = ellipse(27348.821655, 36904.033142, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 15:26:26 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src.reg
[Wed May 29 15:26:26 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (277, 387) - (352, 462)
[Wed May 29 15:26:27 2013] XMMSAS bgd. selection expression = annulus(27348.821655, 36904.033142, 1087.500000, 2175.000000, X, Y) && !ellipse(27871.565063, 34520.963806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25549.574677, 35185.716766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27865.893921, 35659.918274, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29244.453785, 34302.595786, 1799.256052, 514.009131, 2.954665, X, Y) && !ellipse(27909.186829, 36231.097382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25989.223633, 34396.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27815.730000, 35044.459000, 667.657619, 390.486411, 92.313000, X, Y) && !ellipse(27370.422000, 35650.304200, 1691.088049, 314.107209, 93.949000, X, Y) && !ellipse(24348.776611, 34500.196167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28091.409454, 39355.389832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.834000, 35049.444000, 1694.616049, 1694.616049, 0.000000, X, Y) && !ellipse(28175.974200, 37929.655600, 1507.528043, 1507.528043, 0.000000, X, Y) && !ellipse(28086.544000, 40239.562000, 1913.672055, 1913.672055, 0.000000, X, Y) && !ellipse(25137.668121, 34451.479034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27201.991400, 36565.818000, 991.680029, 991.680029, 0.000000, X, Y) && !ellipse(27986.798645, 36846.811951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24919.756592, 35184.458282, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26095.010620, 35122.808502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27538.239410, 38404.042389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27423.866000, 39442.023000, 751.591222, 751.591222, 0.000000, X, Y) && !ellipse(27432.816162, 37986.854980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29268.083923, 35005.575684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30097.000000, 34740.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27362.882820, 37429.926400, 615.208018, 615.208018, 0.000000, X, Y) && !ellipse(29793.389435, 34831.315491, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26.gif
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_bgd.evt exist, delete to re-create
[Wed May 29 15:26:34 2013] Mean detx,y = (343.27, 9391.95) 
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_bgd.img exist, delete to re-create
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_bgd.pi exist, delete to re-create
[Wed May 29 15:26:34 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Wed May 29 15:26:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_bgd.lc exist, delete to re-create
[Wed May 29 16:37:02 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 16:37:02 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:27 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:27 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_src_b10.pi.gz = 4923.00
[Wed May 29 17:52:27 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_bgd.pi.gz = 7718.00
[Wed May 29 17:52:27 2013] Got source and background scale factors 1184470.000000, 3475900.000000
[Wed May 29 17:52:27 2013] User source parameters:
  Position = (314.9, 424.7) = 5 34 31.48 22 8 51.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2293.0 +/- 71.2
  Background aperture counts = 2630.0
  Rate = 0.1 +/- 0.004

[Wed May 29 17:52:27 2013] Updating counts from extracted products
[Wed May 29 17:52:27 2013] Set source signif. to 2292.96/51.28 = 44.71
[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.12, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 3.8e-12
[Wed May 29 17:53:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src26_pl.csv not found, spectral fit skipped or did not complete