[Wed May 29 12:13:18 2013] Detection parameters:
  Position = (327.9, 506.5) = 5 34 27.42 22 14 39.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 565.0 +/- 34.2
  Background counts = 144.0
  Rate = 0.03 +/- 0.002

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 15.24'
[Wed May 29 12:14:08 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Wed May 29 12:14:08 2013] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.899
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 58 for pass 0, mean size = 14.05"
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src58.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src58.csv
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src58_1.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src58.csv
[Wed May 29 12:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Wed May 29 12:14:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Wed May 29 12:14:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src58.csv
[Wed May 29 12:14:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Warning: source 41 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 149 at 12.607757 pixels away
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 4283.900000, observed total counts = 3491.000000
[Wed May 29 12:15:04 2013] Poor agreement between spatial fit and data for source 149
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:33 2013] Using EEF radius (= 14.05 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 14.05"
[Wed May 29 12:15:33 2013] source mask rpix=3.2, npix_max = 55, mask sum = 50, frac = 0.899
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 56 for pass 1, mean size = 14.05"
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src56.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src56.csv
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src56_1.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src56.csv
[Wed May 29 12:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src56.ximg exists
[Wed May 29 12:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg exists
[Wed May 29 12:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src56.csv
[Wed May 29 12:15:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:29 2013] Spatial fit model total counts = 5994.110000, observed total counts = 5742.000000
[Wed May 29 12:16:29 2013] Offset between fit and detection position for source 149 = 0.596155 pixels
[Wed May 29 12:16:29 2013] Warning, changing simple spatial fit ID from 56 to 39
[Wed May 29 12:16:29 2013] 5391.058000 total counts/ 5135.420000 bgd. counts: snr = 3.567282
Spatial fit parameters:
  Offset between fit and detection position for source 149 = 0.596155 pixels
  Position = (328.3, 506.9) = 5 34 27.27 22 14 39.7
  Extent = 10.0 (7.3-22.5)", rotation angle = 0
  Source counts = 255.6 +/- 73.4
  Background counts = 5135.4
  Rate = 0.01 +/- 0.004
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:27 2013] XMMSAS src. selection expression = ellipse(28517.661400, 44052.198000, 597.129017, 597.129017, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src.reg
[Wed May 29 15:26:27 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (294, 473) - (363, 541)
[Wed May 29 15:26:27 2013] XMMSAS bgd. selection expression = annulus(28517.661400, 44052.198000, 995.215029, 1990.430057, X, Y) && !ellipse(28310.337400, 41279.476000, 1048.824030, 1048.824030, 0.000000, X, Y) && !ellipse(28086.544000, 40239.562000, 1913.672055, 1913.672055, 0.000000, X, Y) && !ellipse(28248.207520, 42317.611328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.823730, 41617.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28241.429230, 42744.625000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.576447, 43351.872681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27757.754578, 41787.014343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27909.646149, 43541.712585, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149.gif
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_bgd.evt exist, delete to re-create
[Wed May 29 15:26:34 2013] Mean detx,y = (-380.55, 16481.07) 
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_bgd.img exist, delete to re-create
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_bgd.pi exist, delete to re-create
[Wed May 29 15:26:34 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src_b10.pi.gz
[Wed May 29 15:26:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_bgd.pi.gz
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_bgd.lc exist, delete to re-create
[Wed May 29 17:52:29 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:29 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_src_b10.pi.gz = 1390.00
[Wed May 29 17:52:29 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_bgd.pi.gz = 1976.00
[Wed May 29 17:52:29 2013] Got source and background scale factors 602926.000000, 2053931.000000
[Wed May 29 17:52:29 2013] User source parameters:
  Position = (328.3, 506.9) = 5 34 27.27 22 14 39.7
  Extent = 10.0 (7.3-22.5)", rotation angle = 0
  Source aperture counts = 810.0 +/- 38.3
  Background aperture counts = 580.0
  Rate = 0.04 +/- 0.002

[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0134, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 8.7e-13
[Wed May 29 17:53:07 2013] Flag p found in src. 149 procflags, skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src149_pl.csv not found, spectral fit skipped or did not complete