[Wed May 29 12:13:17 2013] Detection parameters:
  Position = (311.8, 205.1) = 5 34 32.46 21 52 43.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.1 +/- 32.9
  Background counts = 460.5
  Rate = 0.02 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 6.84'
[Wed May 29 12:14:08 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Wed May 29 12:14:08 2013] source mask rpix=2.3, npix_max = 30, mask sum = 32, frac = 1.047
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 9.85"
[Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src95.ximg exists
[Wed May 29 12:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src95.csv
[Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src95_1.ximg exists
[Wed May 29 12:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src95.csv
[Wed May 29 12:14:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:14 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Wed May 29 12:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95.csv
[Wed May 29 12:14:14 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Wed May 29 12:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95.csv
[Wed May 29 12:14:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Warning, spatial fit 95 centroid is now closest to src. 135
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:33 2013] Using EEF radius (= 9.85 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 9.85"
[Wed May 29 12:15:33 2013] source mask rpix=2.3, npix_max = 30, mask sum = 32, frac = 1.047
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 91 for pass 1, mean size = 9.85"
[Wed May 29 12:15:36 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src91.ximg exists
[Wed May 29 12:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src91.csv
[Wed May 29 12:15:36 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src91_1.ximg exists
[Wed May 29 12:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src91.csv
[Wed May 29 12:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:39 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src91.ximg exists
[Wed May 29 12:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src91.csv
[Wed May 29 12:15:39 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src91_1.ximg exists
[Wed May 29 12:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src91.csv
[Wed May 29 12:15:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src91_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src91.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:29 2013] Source 138 is offset by -8.582819 and -2.828002 pixels which is larger than
2 X fitted extent = 1.048138 x 1.048138, not incorporating fit results
[Wed May 29 12:16:29 2013] Warning, spatial fit 91 centroid is now closest to src. 135
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:29 2013] XMMSAS src. selection expression = ellipse(27078.300720, 17794.147812, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 15:26:29 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src.reg
[Wed May 29 15:26:29 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (274, 168) - (349, 243)
[Wed May 29 15:26:29 2013] XMMSAS bgd. selection expression = annulus(27078.300720, 17794.147812, 1087.500000, 2175.000000, X, Y) && !ellipse(27197.267273, 20261.603271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28592.113464, 20251.526108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.609924, 20301.760590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.372000, 20763.308000, 2995.616086, 2995.616086, 0.000000, X, Y) && !ellipse(26526.312164, 19696.520111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.952209, 18996.695541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.201263, 19354.694382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29087.061371, 20191.799896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25470.699066, 19530.595383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.759888, 20353.985016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.800000, 20658.354000, 2872.752083, 2872.752083, 0.000000, X, Y) && !ellipse(26436.057098, 18480.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.034000, 19191.450000, 1497.808043, 1497.808043, 0.000000, X, Y) && !ellipse(27065.970764, 18472.649841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.690887, 17615.015640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24341.485901, 20445.649902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29960.988159, 19894.804337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.178000, 19206.942000, 1512.144044, 208.237606, 295.305000, X, Y) && !ellipse(24714.868000, 19547.112200, 1414.608041, 1414.608041, 0.000000, X, Y) && !ellipse(28771.956000, 19137.746000, 1497.808043, 1497.808043, 0.000000, X, Y) && !ellipse(26796.939301, 17179.614731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26216.064026, 17966.925171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.672913, 15260.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.136078, 17203.967987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26518.803741, 16580.289658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26751.679016, 16494.691513, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:29 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138.gif
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_bgd.evt exist, delete to re-create
[Wed May 29 15:26:35 2013] Mean detx,y = (-477.97, -9635.92) 
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_bgd.img exist, delete to re-create
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_bgd.pi exist, delete to re-create
[Wed May 29 15:26:35 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src_b10.pi.gz
[Wed May 29 15:26:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_bgd.pi.gz
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_bgd.lc exist, delete to re-create
[Wed May 29 17:28:59 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 17:28:59 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:34 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:34 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_src_b10.pi.gz = 3865.00
[Wed May 29 17:52:34 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_bgd.pi.gz = 4894.00
[Wed May 29 17:52:34 2013] Got source and background scale factors 1147526.000000, 2403200.000000
[Wed May 29 17:52:35 2013] User source parameters:
  Position = (311.8, 205.1) = 5 34 32.46 21 52 43.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1528.1 +/- 63.2
  Background aperture counts = 2336.9
  Rate = 0.08 +/- 0.003

[Wed May 29 17:52:35 2013] Updating counts from extracted products
[Wed May 29 17:52:35 2013] Set source signif. to 1528.12/48.34 = 31.61
[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0803, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 1.9e-12
[Wed May 29 17:53:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src138_pl.csv not found, spectral fit skipped or did not complete