[Wed May 29 12:13:17 2013] Detection parameters:
  Position = (319.0, 222.3) = 5 34 30.21 21 54 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 393.1 +/- 42.2
  Background counts = 588.1
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 5.72'
[Wed May 29 12:14:08 2013] Using EEF radius (= 9.29 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 9.29"
[Wed May 29 12:14:08 2013] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.008
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 9.29"
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src63.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src63.csv
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src63.csv
[Wed May 29 12:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed May 29 12:14:13 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 7759.000000, observed total counts = 8080.000000
[Wed May 29 12:15:04 2013] Offset between fit and detection position for source 133 = 2.931820 pixels
[Wed May 29 12:15:04 2013] 7332.420000 total counts/ 5637.040000 bgd. counts: snr = 22.580913
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 2.931820 pixels
  Position = (321.6, 220.8) = 5 34 29.41 21 53 55.4
  Extent = 18.6 (18.5-37.2)", rotation angle = 0
  Source counts = 1695.4 +/- 85.6
  Background counts = 5637.0
  Rate = 0.09 +/- 0.004
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 7559.310000, observed total counts = 7683.000000
[Wed May 29 12:15:04 2013] Offset between fit and detection position for source 133 = 0.706503 pixels
[Wed May 29 12:15:04 2013] Warning, changing simple spatial fit ID from 63 to 91
[Wed May 29 12:15:04 2013] 7743.270000 total counts/ 6657.960000 bgd. counts: snr = 13.300967
Spatial fit parameters:
  Offset between fit and detection position for source 133 = 0.706503 pixels
  Position = (320.9, 221.1) = 5 34 29.61 21 53 56.7
  Extent = 18.7 (18.7-37.4)", rotation angle = 0
  Source counts = 1085.3 +/- 88.0
  Background counts = 6658.0
  Rate = 0.06 +/- 0.005
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 112
[Wed May 29 12:15:04 2013] Source is confused with source 134
[Wed May 29 12:15:04 2013] Source is confused with source 135
[Wed May 29 12:15:04 2013] Source is confused with source 132
[Wed May 29 12:15:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 18.72"
[Wed May 29 12:15:33 2013] source mask rpix=4.3, npix_max = 92, mask sum = 93, frac = 1.007
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 18.72"
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src61.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src61.csv
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src61_1.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src61.csv
[Wed May 29 12:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Wed May 29 12:15:38 2013] Fit fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Wed May 29 12:16:29 2013] Warning, spatial fit 61 centroid is now closest to src. 112
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:27 2013] Counts = 1085.310000, rescaling region sizes by 2.000000
[Wed May 29 15:26:27 2013] XMMSAS src. selection expression = ellipse(27873.034000, 19191.450000, 2246.712065, 2246.712065, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src.reg
[Wed May 29 15:26:27 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (192, 92) - (450, 350)
[Wed May 29 15:26:27 2013] XMMSAS bgd. selection expression = annulus(27873.034000, 19191.450000, 7489.040215, 14978.080431, X, Y) && !ellipse(27871.565063, 34520.963806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29244.453785, 34302.595786, 1799.256052, 514.009131, 2.954665, X, Y) && !ellipse(25989.223633, 34396.748260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27370.422000, 35650.304200, 1691.088049, 314.107209, 93.949000, X, Y) && !ellipse(24348.776611, 34500.196167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20146.100204, 26055.445374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31213.834000, 35049.444000, 1694.616049, 1694.616049, 0.000000, X, Y) && !ellipse(27197.267273, 20261.603271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34064.999695, 28314.415985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28592.113464, 20251.526108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25137.668121, 34451.479034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34458.388000, 25364.994000, 1636.024047, 1636.024047, 0.000000, X, Y) && !ellipse(26344.609924, 20301.760590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20232.773636, 26570.560883, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.372000, 20763.308000, 2995.616086, 2995.616086, 0.000000, X, Y) && !ellipse(34049.568665, 28929.655304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26526.312164, 19696.520111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.952209, 18996.695541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34135.087158, 27086.799469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31588.244995, 34169.568024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19589.462800, 27204.194000, 1445.776042, 1445.776042, 0.000000, X, Y) && !ellipse(34118.243652, 26135.266174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33753.052338, 24045.471375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32573.851600, 34065.740600, 1738.032050, 454.459213, 359.878807, X, Y) && !ellipse(34379.721558, 29925.684235, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.201263, 19354.694382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29087.061371, 20191.799896, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19844.275146, 28762.468109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25470.699066, 19530.595383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19841.559200, 29327.129000, 455.764813, 455.764813, 0.000000, X, Y) && !ellipse(34327.648468, 30848.041412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35160.897552, 30318.963104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.953461, 20518.083084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23829.867065, 34576.249481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.759888, 20353.985016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.800000, 20658.354000, 2872.752083, 2872.752083, 0.000000, X, Y) && !ellipse(34139.887451, 24838.802094, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23278.990967, 34574.752045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26436.057098, 18480.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34741.958000, 31257.136000, 1711.272049, 1711.272049, 0.000000, X, Y) && !ellipse(30737.602000, 34006.780000, 794.401623, 794.401623, 0.000000, X, Y) && !ellipse(27065.970764, 18472.649841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34121.809357, 23268.960266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29268.083923, 35005.575684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.690887, 17615.015640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30097.000000, 34740.208160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24341.485901, 20445.649902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29960.988159, 19894.804337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20153.064346, 31699.079193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20350.348953, 32228.168121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33893.275055, 22749.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34615.290000, 29348.380000, 1663.544048, 789.896823, 6.446000, X, Y) && !ellipse(20432.958862, 27524.741241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.178000, 19206.942000, 1512.144044, 208.237606, 295.305000, X, Y) && !ellipse(30872.666809, 20098.478271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34897.292969, 32229.700073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29793.389435, 34831.315491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20482.157883, 29971.995911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34965.545807, 24856.102264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.868000, 19547.112200, 1414.608041, 1414.608041, 0.000000, X, Y) && !ellipse(32246.201080, 34117.279877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28771.956000, 19137.746000, 1497.808043, 1497.808043, 0.000000, X, Y) && !ellipse(35121.595154, 25270.727570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20316.567688, 27011.239990, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23475.861389, 20128.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22004.335297, 20395.686234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27078.300720, 17794.147812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34600.675751, 23004.240570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19716.889496, 23846.123810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20505.080078, 30405.089600, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30742.262390, 34677.525574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30456.318390, 19887.623810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22953.457825, 20233.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19951.664444, 24760.008789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33908.618469, 22034.135345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26796.939301, 17179.614731, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26216.064026, 17966.925171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18898.900000, 30715.422000, 1557.432045, 1557.432045, 0.000000, X, Y) && !ellipse(20574.044464, 31277.096802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20507.566513, 29612.427948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35258.629181, 31621.016022, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31722.950562, 20129.723984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19372.866000, 25937.610000, 1445.776042, 1445.776042, 0.000000, X, Y) && !ellipse(34871.069244, 23976.090149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35613.009216, 27097.708984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32229.105347, 20025.958801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19528.261612, 28865.363770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19832.112457, 32292.191498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.672913, 15260.236969, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20438.534424, 33028.468292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35435.966553, 28561.004486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22856.193481, 34682.782532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.136078, 17203.967987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20696.410782, 30828.038422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34012.013275, 21616.069122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21225.235535, 20601.725800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.370667, 20579.089020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34298.794000, 32527.976000, 1759.712051, 1759.712051, 0.000000, X, Y) && !ellipse(35685.660000, 29765.700000, 1711.272049, 1711.272049, 0.000000, X, Y) && !ellipse(20161.827271, 24277.998840, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26612.066956, 13782.480850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26518.803741, 16580.289658, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26751.679016, 16494.691513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21083.661407, 34789.047424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33663.997345, 34016.091400, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133.gif
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_bgd.evt exist, delete to re-create
[Wed May 29 15:26:35 2013] Mean detx,y = (-1074.01, -8241.44) 
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_bgd.img exist, delete to re-create
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_bgd.pi exist, delete to re-create
[Wed May 29 15:26:35 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src_b10.pi.gz
[Wed May 29 15:26:35 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_bgd.pi.gz
[Wed May 29 15:26:35 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_bgd.lc exist, delete to re-create
[Wed May 29 17:52:29 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:29 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_src_b10.pi.gz = 51956.00
[Wed May 29 17:52:29 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_bgd.pi.gz = 226581.00
[Wed May 29 17:52:29 2013] Got source and background scale factors 12425550.000000, 199602758.000000
[Wed May 29 17:52:29 2013] User source parameters:
  Position = (320.9, 221.1) = 5 34 29.61 21 53 56.7
  Extent = 18.7 (18.7-37.4)", rotation angle = 0
  Source aperture counts = 37851.0 +/- 228.9
  Background aperture counts = 14105.0
  Rate = 2 +/- 0.01

[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.057, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 9.5e-13
[Wed May 29 17:53:07 2013] Flag c found in src. 133 procflags, skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src133_pl.csv not found, spectral fit skipped or did not complete