[Wed May 29 12:13:17 2013] Detection parameters:
  Position = (293.6, 234.5) = 5 34 38.15 21 54 53.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 448.0 +/- 43.2
  Background counts = 608.7
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 4.65'
[Wed May 29 12:14:08 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed May 29 12:14:08 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 8.75"
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src55.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src55.csv
[Wed May 29 12:14:11 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed May 29 12:14:11 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src55.csv
[Wed May 29 12:14:11 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed May 29 12:14:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Wed May 29 12:14:13 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed May 29 12:14:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55.csv
[Wed May 29 12:14:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Warning, spatial fit 55 centroid is now closest to src. 127
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 122
[Wed May 29 12:15:33 2013] Using EEF radius (= 8.75 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 8.75"
[Wed May 29 12:15:33 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.990
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 53 for pass 1, mean size = 8.75"
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src53.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src53.csv
[Wed May 29 12:15:35 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src53_1.ximg exists
[Wed May 29 12:15:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src53.csv
[Wed May 29 12:15:35 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src53.ximg exists
[Wed May 29 12:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Wed May 29 12:15:38 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg exists
[Wed May 29 12:15:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src53.csv
[Wed May 29 12:15:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:29 2013] Warning, spatial fit 53 centroid is now closest to src. 127
[Wed May 29 12:16:29 2013] Source 124 is offset by -0.463151 and -5.855506 pixels which is larger than
2 X fitted extent = 1.005448 x 1.005448, not incorporating fit results
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:27 2013] XMMSAS src. selection expression = ellipse(25495.759888, 20353.985016, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src.reg
[Wed May 29 15:26:27 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (256, 197) - (331, 272)
[Wed May 29 15:26:27 2013] XMMSAS bgd. selection expression = annulus(25495.759888, 20353.985016, 1087.500000, 2175.000000, X, Y) && !ellipse(27197.267273, 20261.603271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26344.609924, 20301.760590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.372000, 20763.308000, 2995.616086, 2995.616086, 0.000000, X, Y) && !ellipse(26526.312164, 19696.520111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26703.952209, 18996.695541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27029.201263, 19354.694382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25470.699066, 19530.595383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.953461, 20518.083084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.800000, 20658.354000, 2872.752083, 2872.752083, 0.000000, X, Y) && !ellipse(26436.057098, 18480.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27873.034000, 19191.450000, 1497.808043, 1497.808043, 0.000000, X, Y) && !ellipse(27065.970764, 18472.649841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26438.690887, 17615.015640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24341.485901, 20445.649902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.868000, 19547.112200, 1414.608041, 1414.608041, 0.000000, X, Y) && !ellipse(28771.956000, 19137.746000, 1497.808043, 1497.808043, 0.000000, X, Y) && !ellipse(23475.861389, 20128.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27078.300720, 17794.147812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22953.457825, 20233.526337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26216.064026, 17966.925171, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:27 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124.gif
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_bgd.evt exist, delete to re-create
[Wed May 29 15:26:34 2013] Mean detx,y = (1287.28, -7289.49) 
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_bgd.img exist, delete to re-create
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_bgd.pi exist, delete to re-create
[Wed May 29 15:26:34 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src_b10.pi.gz
[Wed May 29 15:26:34 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_bgd.pi.gz
[Wed May 29 15:26:34 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_bgd.lc exist, delete to re-create
[Wed May 29 16:38:17 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 16:38:17 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:28 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:28 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_src_b10.pi.gz = 5537.00
[Wed May 29 17:52:28 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_bgd.pi.gz = 0.00
[Wed May 29 17:52:28 2013] Got source and background scale factors 1107594.000000, 0.000000
[Wed May 29 17:52:28 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0318, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 6e-13
[Wed May 29 17:53:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src124_pl.csv not found, spectral fit skipped or did not complete