[Wed May 29 12:13:17 2013] Detection parameters:
  Position = (264.4, 233.1) = 5 34 47.28 21 54 50.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.7 +/- 34.6
  Background counts = 512.7
  Rate = 0.02 +/- 0.003

[Wed May 29 12:13:18 2013] Off-axis axis estimate = 5.34'
[Wed May 29 12:14:08 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:08 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Wed May 29 12:14:08 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.931
[Wed May 29 12:14:08 2013] Giving source the simple spatial ID 100 for pass 0, mean size = 9.10"
[Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src100.ximg exists
[Wed May 29 12:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src100.csv
[Wed May 29 12:14:12 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src100_1.ximg exists
[Wed May 29 12:14:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src100.csv
[Wed May 29 12:14:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:14 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Wed May 29 12:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src100.csv
[Wed May 29 12:14:14 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Wed May 29 12:14:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src100.csv
[Wed May 29 12:14:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:04 2013] Spatial fit model total counts = 7809.980000, observed total counts = 5208.000000
[Wed May 29 12:15:04 2013] Poor agreement between spatial fit and data for source 117
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:15:04 2013] Source 117 is offset by 0.923331 and 7.002648 pixels which is larger than
2 X fitted extent = 2.043140 x 2.043140, not incorporating fit results
[Wed May 29 12:15:04 2013] Warning, spatial fit 100 centroid is now closest to src. 108
[Wed May 29 12:15:04 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:15:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:15:04 2013] Assessing source extent using major
[Wed May 29 12:15:04 2013] Source does appear to be extended
[Wed May 29 12:15:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:04 2013] Source is confused with source 118
[Wed May 29 12:15:33 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:33 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Wed May 29 12:15:33 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.931
[Wed May 29 12:15:33 2013] Giving source the simple spatial ID 96 for pass 1, mean size = 9.10"
[Wed May 29 12:15:36 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src96.ximg exists
[Wed May 29 12:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src96.csv
[Wed May 29 12:15:36 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src96_1.ximg exists
[Wed May 29 12:15:36 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src96.csv
[Wed May 29 12:15:36 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:39 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src96.ximg exists
[Wed May 29 12:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src96.csv
[Wed May 29 12:15:39 2013] fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src96_1.ximg exists
[Wed May 29 12:15:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src96.csv
[Wed May 29 12:15:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src96_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src96.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:29 2013] Spatial fit model total counts = 8398.780000, observed total counts = 5208.000000
[Wed May 29 12:16:29 2013] Poor agreement between spatial fit and data for source 117
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:16:29 2013] Source 117 is offset by 0.936251 and 7.068073 pixels which is larger than
2 X fitted extent = 2.244175 x 2.244175, not incorporating fit results
[Wed May 29 12:16:29 2013] Source 117 is offset by 2.887262 and 5.630004 pixels which is larger than
2 X fitted extent = 1.063012 x 1.063012, not incorporating fit results
[Wed May 29 12:16:29 2013] Source 117 is offset by 0.852359 and 7.165291 pixels which is larger than
2 X fitted extent = 1.905067 x 1.905067, not incorporating fit results
[Wed May 29 12:16:29 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:29 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:29 2013] Assessing source extent using major
[Wed May 29 12:16:29 2013] Source does appear to be extended
[Wed May 29 12:16:29 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 15:26:29 2013] XMMSAS src. selection expression = ellipse(22953.457825, 20233.526337, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 15:26:29 2013] Not overwriting source region fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src.reg
[Wed May 29 15:26:29 2013] Extracting stamp from image fullrun_mos2_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (227, 196) - (302, 271)
[Wed May 29 15:26:29 2013] XMMSAS bgd. selection expression = annulus(22953.457825, 20233.526337, 1087.500000, 2175.000000, X, Y) && !ellipse(27590.372000, 20763.308000, 2995.616086, 2995.616086, 0.000000, X, Y) && !ellipse(25470.699066, 19530.595383, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23606.953461, 20518.083084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.759888, 20353.985016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24978.800000, 20658.354000, 2872.752083, 2872.752083, 0.000000, X, Y) && !ellipse(24341.485901, 20445.649902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24714.868000, 19547.112200, 1414.608041, 1414.608041, 0.000000, X, Y) && !ellipse(23475.861389, 20128.095123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22004.335297, 20395.686234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21225.235535, 20601.725800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22395.370667, 20579.089020, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 15:26:29 2013] Writing fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117.gif
[Wed May 29 15:26:36 2013] ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src.evt and ../../xmm0412592401/products/events/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_bgd.evt exist, delete to re-create
[Wed May 29 15:26:36 2013] Mean detx,y = (3820.45, -7458.17) 
[Wed May 29 15:26:36 2013] ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src.img and ../../xmm0412592401/products/images/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_bgd.img exist, delete to re-create
[Wed May 29 15:26:36 2013] ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src_b10.pi.gz and ../../xmm0412592401/products/spectra/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_bgd.pi exist, delete to re-create
[Wed May 29 15:26:36 2013] Setting source spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src_b10.pi.gz
[Wed May 29 15:26:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_bgd.pi.gz
[Wed May 29 15:26:36 2013] ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src.lc and ../../xmm0412592401/products/lightcurves/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_bgd.lc exist, delete to re-create
[Wed May 29 17:29:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 17:29:58 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:35 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:35 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_src_b10.pi.gz = 4596.00
[Wed May 29 17:52:35 2013] Total counts from fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_bgd.pi.gz = 4420.00
[Wed May 29 17:52:35 2013] Got source and background scale factors 1323520.000000, 2114812.000000
[Wed May 29 17:52:35 2013] User source parameters:
  Position = (264.4, 233.1) = 5 34 47.28 21 54 50.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1829.8 +/- 68.8
  Background aperture counts = 2766.2
  Rate = 0.1 +/- 0.004

[Wed May 29 17:52:35 2013] Updating counts from extracted products
[Wed May 29 17:52:35 2013] Set source signif. to 1829.82/52.59 = 34.79
[Wed May 29 17:52:41 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:41 2013] Using photon index=1.80, rate=0.0961, arf fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117.arf
[Wed May 29 17:52:41 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:41 2013] Updating source flux to 1.9e-12
[Wed May 29 17:53:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:28 2013] xmm0412592401/analysis//spectral/fullrun_mos2_xmm0412592401_pi300-10000_pass1_cl_src117_pl.csv not found, spectral fit skipped or did not complete