[Wed May 29 12:13:11 2013] Detection parameters:
  Position = (263.4, 399.0) = 5 34 47.61 22 6 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.6 +/- 32.2
  Background counts = 389.5
  Rate = 0.02 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 7.72'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Wed May 29 12:14:01 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.914
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 81 for pass 0, mean size = 10.29"
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src81.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src81.csv
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src81_1.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src81.csv
[Wed May 29 12:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:08 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Wed May 29 12:14:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src81.csv
[Wed May 29 12:14:08 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Wed May 29 12:14:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src81.csv
[Wed May 29 12:14:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:42 2013] Spatial fit model total counts = 5035.910000, observed total counts = 4338.000000
[Wed May 29 12:14:42 2013] Poor agreement between spatial fit and data for source 95
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.29"
[Wed May 29 12:15:27 2013] source mask rpix=2.4, npix_max = 32, mask sum = 30, frac = 0.914
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 10.29"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src74.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src74.csv
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src74_1.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src74.csv
[Wed May 29 12:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Wed May 29 12:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src74.csv
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Wed May 29 12:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src74.csv
[Wed May 29 12:15:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:06 2013] Source 95 is offset by 0.648383 and -6.277229 pixels which is larger than
2 X fitted extent = 1.159287 x 1.159287, not incorporating fit results
[Wed May 29 12:16:06 2013] Warning: source 74 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 95 at 12.972182 pixels away
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:56 2013] XMMSAS src. selection expression = ellipse(22865.045349, 34664.245117, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:56 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95_src.reg
[Wed May 29 12:16:56 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (226, 361) - (301, 436)
[Wed May 29 12:16:56 2013] XMMSAS bgd. selection expression = annulus(22865.045349, 34664.245117, 1087.500000, 2175.000000, X, Y) && !ellipse(20619.713623, 34783.466553, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20700.110565, 32459.293732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.516846, 34401.766266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(23648.565735, 34395.043732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20573.970123, 31884.620605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24369.615936, 35593.571747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24188.862000, 34972.450000, 1681.952048, 1681.952048, 0.000000, X, Y) && !ellipse(23511.887482, 34899.982513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.514038, 34555.303955, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:56 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95.gif
[Wed May 29 13:06:32 2013] Mean detx,y = (7201.51, -4846.44) 
[Wed May 29 13:06:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 13:06:50 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 13:06:50 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Wed May 29 13:06:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Wed May 29 14:50:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:50:32 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:13 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:13 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95_src_b10.pi.gz = 3297.00
[Wed May 29 17:52:13 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95_bgd.pi.gz = 0.00
[Wed May 29 17:52:13 2013] Got source and background scale factors 1234412.000000, 0.000000
[Wed May 29 17:52:13 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:19 2013] Using photon index=1.80, rate=0.0192, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95.arf
[Wed May 29 17:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:19 2013] Updating source flux to 4.2e-13
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src95_pl.csv not found, spectral fit skipped or did not complete