[Wed May 29 12:13:10 2013] Detection parameters:
  Position = (313.2, 415.9) = 5 34 32.01 22 8 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 254.7 +/- 37.6
  Background counts = 586.7
  Rate = 0.02 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 8.59'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Wed May 29 12:14:01 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 68 for pass 0, mean size = 10.72"
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src68.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src68.csv
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src68_1.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src68.csv
[Wed May 29 12:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src68_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src68.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src68.ximg exists
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src68_1.ximg exists
[Wed May 29 12:14:07 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src68 appears to have run properly
[Wed May 29 12:14:42 2013] Source 82 is offset by -0.216987 and -5.712551 pixels which is larger than
2 X fitted extent = 1.232405 x 1.232405, not incorporating fit results
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 58
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.72"
[Wed May 29 12:15:27 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.024
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 10.72"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src62.ximg exists
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src62_1.ximg exists
[Wed May 29 12:15:29 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src62 appears to have run properly
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Wed May 29 12:15:32 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src62 appears to have run properly
[Wed May 29 12:16:06 2013] Source 82 is offset by -0.239900 and -5.716115 pixels which is larger than
2 X fitted extent = 1.622087 x 1.232405, not incorporating fit results
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:56 2013] XMMSAS src. selection expression = ellipse(27200.434723, 36139.082031, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:56 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82_src.reg
[Wed May 29 12:16:56 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (276, 378) - (351, 453)
[Wed May 29 12:16:56 2013] XMMSAS bgd. selection expression = annulus(27200.434723, 36139.082031, 1087.500000, 2175.000000, X, Y) && !ellipse(28790.672000, 34553.606000, 963.984028, 963.984028, 0.000000, X, Y) && !ellipse(27758.680247, 34332.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(25728.960000, 35640.788000, 684.368820, 684.368820, 0.000000, X, Y) && !ellipse(25981.327576, 34310.807617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.648000, 39945.006000, 1933.592056, 1933.592056, 0.000000, X, Y) && !ellipse(27900.419922, 38925.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24326.516846, 34401.766266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29750.566467, 34173.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27900.520813, 38148.140045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.240417, 37538.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(27901.150800, 36279.786000, 1695.384049, 1695.384049, 0.000000, X, Y) && !ellipse(30113.226000, 34850.174000, 1390.704040, 1390.704040, 0.000000, X, Y) && !ellipse(26248.014648, 34491.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28457.203461, 37185.851227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28436.490800, 36727.100000, 1798.800052, 1798.800052, 0.000000, X, Y) && !ellipse(24369.615936, 35593.571747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29303.937439, 35183.088287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.924000, 35014.820000, 1256.272036, 1256.272036, 0.000000, X, Y) && !ellipse(24188.862000, 34972.450000, 1681.952048, 1681.952048, 0.000000, X, Y) && !ellipse(24657.514038, 34555.303955, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:56 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82.gif
[Wed May 29 12:57:02 2013] Mean detx,y = (8847.42, -560.78) 
[Wed May 29 12:57:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:57:19 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:57:19 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82_src_b10.pi.gz
[Wed May 29 12:57:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82_bgd.pi.gz
[Wed May 29 14:37:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:37:03 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:12 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:12 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82_src_b10.pi.gz = 5533.00
[Wed May 29 17:52:12 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82_bgd.pi.gz = 0.00
[Wed May 29 17:52:12 2013] Got source and background scale factors 1352000.000000, 0.000000
[Wed May 29 17:52:12 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:19 2013] Using photon index=1.80, rate=0.0215, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82.arf
[Wed May 29 17:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:19 2013] Updating source flux to 4.5e-13
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src82_pl.csv not found, spectral fit skipped or did not complete