[Wed May 29 12:13:10 2013] Detection parameters:
  Position = (327.7, 428.0) = 5 34 27.49 22 8 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.1 +/- 34.3
  Background counts = 497.9
  Rate = 0.02 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 9.63'
[Wed May 29 12:14:01 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Wed May 29 12:14:01 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 64 for pass 0, mean size = 11.24"
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src64.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src64.csv
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src64_1.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src64.csv
[Wed May 29 12:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src64_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src64.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src64.ximg exists
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src64_1.ximg exists
[Wed May 29 12:14:07 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src64 appears to have run properly
[Wed May 29 12:14:42 2013] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 14.282658 pixels away
[Wed May 29 12:14:42 2013] Warning, spatial fit 64 centroid is now closest to src. 38
[Wed May 29 12:14:42 2013] Source 78 is offset by -6.526535 and -7.197250 pixels which is larger than
2 X fitted extent = 1.272285 x 1.272285, not incorporating fit results
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 58
[Wed May 29 12:14:42 2013] Source is confused with source 80
[Wed May 29 12:15:27 2013] Using EEF radius (= 11.24 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 11.24"
[Wed May 29 12:15:27 2013] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.946
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 59 for pass 1, mean size = 11.24"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src59.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src59.csv
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src59.csv
[Wed May 29 12:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed May 29 12:15:32 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Wed May 29 12:16:06 2013] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 10.702905 pixels away
[Wed May 29 12:16:06 2013] Warning, spatial fit 59 centroid is now closest to src. 80
[Wed May 29 12:16:06 2013] Warning: source 61 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 78 at 12.004170 pixels away
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:55 2013] XMMSAS src. selection expression = ellipse(28457.203461, 37185.851227, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:55 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78_src.reg
[Wed May 29 12:16:55 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (290, 390) - (365, 465)
[Wed May 29 12:16:55 2013] XMMSAS bgd. selection expression = annulus(28457.203461, 37185.851227, 1087.500000, 2175.000000, X, Y) && !ellipse(28790.672000, 34553.606000, 963.984028, 963.984028, 0.000000, X, Y) && !ellipse(27758.680247, 34332.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(25728.960000, 35640.788000, 684.368820, 684.368820, 0.000000, X, Y) && !ellipse(25981.327576, 34310.807617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.648000, 39945.006000, 1933.592056, 1933.592056, 0.000000, X, Y) && !ellipse(27900.419922, 38925.636169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29750.566467, 34173.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.617371, 39359.295380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27900.520813, 38148.140045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27685.240417, 37538.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(31340.097992, 35229.689362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.150800, 36279.786000, 1695.384049, 1695.384049, 0.000000, X, Y) && !ellipse(30113.226000, 34850.174000, 1390.704040, 1390.704040, 0.000000, X, Y) && !ellipse(26248.014648, 34491.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28436.490800, 36727.100000, 1798.800052, 1798.800052, 0.000000, X, Y) && !ellipse(27200.434723, 36139.082031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29303.937439, 35183.088287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30484.924000, 35014.820000, 1256.272036, 1256.272036, 0.000000, X, Y)
[Wed May 29 12:16:55 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78.gif
[Wed May 29 12:52:13 2013] Mean detx,y = (9944.96, 525.80) 
[Wed May 29 12:52:13 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:52:29 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:52:29 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78_src_b10.pi.gz
[Wed May 29 12:52:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78_bgd.pi.gz
[Wed May 29 14:33:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:33:12 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:11 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:11 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78_src_b10.pi.gz = 4346.00
[Wed May 29 17:52:11 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78_bgd.pi.gz = 0.00
[Wed May 29 17:52:11 2013] Got source and background scale factors 1300696.000000, 0.000000
[Wed May 29 17:52:11 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:19 2013] Using photon index=1.80, rate=0.0186, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78.arf
[Wed May 29 17:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:19 2013] Updating source flux to 4.2e-13
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src78_pl.csv not found, spectral fit skipped or did not complete