[Wed May 29 12:13:10 2013] Detection parameters:
  Position = (404.8, 274.9) = 5 34 3.38 21 57 51.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 349.0 +/- 31.7
  Background counts = 471.4
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 7.90'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.38"
[Wed May 29 12:14:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.961
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 55 for pass 0, mean size = 10.38"
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src55.ximg exists
[Wed May 29 12:14:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src55.csv
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src55_1.ximg exists
[Wed May 29 12:14:04 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src55.csv
[Wed May 29 12:14:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Wed May 29 12:14:07 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Wed May 29 12:14:42 2013] Warning, spatial fit 55 centroid is now closest to src. 32
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 53
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.38"
[Wed May 29 12:15:27 2013] source mask rpix=2.4, npix_max = 33, mask sum = 32, frac = 0.961
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 54 for pass 1, mean size = 10.38"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src54.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src54.csv
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src54_1.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src54.csv
[Wed May 29 12:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Wed May 29 12:15:32 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Wed May 29 12:16:06 2013] Spatial fit model total counts = 2919.210000, observed total counts = 6523.000000
[Wed May 29 12:16:06 2013] Poor agreement between spatial fit and data for source 69
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:16:06 2013] Warning, spatial fit 54 centroid is now closest to src. 32
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:55 2013] XMMSAS src. selection expression = ellipse(35170.166260, 23867.897705, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:55 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69_src.reg
[Wed May 29 12:16:55 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (367, 237) - (442, 312)
[Wed May 29 12:16:55 2013] XMMSAS bgd. selection expression = annulus(35170.166260, 23867.897705, 1087.500000, 2175.000000, X, Y) && !ellipse(34181.586000, 26415.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(34012.002655, 26144.426025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33963.065155, 25441.074249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33961.227875, 24828.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33895.239777, 23784.705017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34619.589697, 24865.843951, 1663.608048, 665.314434, 90.000000, X, Y) && !ellipse(33756.432190, 23010.607330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(33838.990326, 24137.253082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34869.643494, 23606.520691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33751.002655, 21792.964432, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35270.353790, 26319.097748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35280.071198, 25436.698761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34783.047058, 21694.150879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35652.276000, 26202.148000, 706.359220, 706.359220, 0.000000, X, Y) && !ellipse(34446.654000, 25635.213000, 1272.216037, 1272.216037, 0.000000, X, Y) && !ellipse(35742.154000, 24602.660000, 1240.816036, 1240.816036, 0.000000, X, Y) && !ellipse(34208.626160, 20841.788239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.002655, 21012.989838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35092.740295, 23363.115570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35017.924225, 22549.561493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34773.064148, 22226.688690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34893.844086, 22043.632385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35593.154000, 21571.384000, 1407.472040, 1407.472040, 0.000000, X, Y) && !ellipse(35308.764099, 21289.217758, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:55 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69.gif
[Wed May 29 12:50:10 2013] Mean detx,y = (-2986.35, 7960.51) 
[Wed May 29 12:50:11 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:50:28 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:50:28 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Wed May 29 12:50:28 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Wed May 29 14:32:32 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:32:32 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:11 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:11 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 4329.00
[Wed May 29 17:52:11 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69_bgd.pi.gz = 3436.00
[Wed May 29 17:52:11 2013] Got source and background scale factors 1185020.000000, 1542425.000000
[Wed May 29 17:52:11 2013] User source parameters:
  Position = (404.8, 274.9) = 5 34 3.38 21 57 51.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1689.2 +/- 66.8
  Background aperture counts = 2639.8
  Rate = 0.09 +/- 0.004

[Wed May 29 17:52:11 2013] Updating counts from extracted products
[Wed May 29 17:52:11 2013] Set source signif. to 1689.18/51.38 = 32.88
[Wed May 29 17:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:19 2013] Using photon index=1.80, rate=0.0887, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69.arf
[Wed May 29 17:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:19 2013] Updating source flux to 1.9e-12
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete