[Wed May 29 12:13:09 2013] Detection parameters:
  Position = (388.0, 401.7) = 5 34 8.60 22 7 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 325.8 +/- 27.1
  Background counts = 299.9
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 9.91'
[Wed May 29 12:14:01 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 11.38"
[Wed May 29 12:14:01 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.772
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 48 for pass 0, mean size = 11.38"
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src48.ximg exists
[Wed May 29 12:14:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src48.csv
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src48_1.ximg exists
[Wed May 29 12:14:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src48.csv
[Wed May 29 12:14:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Wed May 29 12:14:07 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Wed May 29 12:14:42 2013] Warning, spatial fit 48 centroid is now closest to src. 99
[Wed May 29 12:14:42 2013] Source 61 is offset by -0.631069 and 3.101577 pixels which is larger than
2 X fitted extent = 1.394432 x 1.394432, not incorporating fit results
[Wed May 29 12:14:42 2013] Source 61 is offset by -1.361253 and 6.089738 pixels which is larger than
2 X fitted extent = 1.296363 x 1.296363, not incorporating fit results
[Wed May 29 12:14:42 2013] Source 61 is offset by -2.144448 and 0.243439 pixels which is larger than
2 X fitted extent = 1.850281 x 1.850281, not incorporating fit results
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 59
[Wed May 29 12:15:27 2013] Using EEF radius (= 11.38 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 11.38"
[Wed May 29 12:15:27 2013] source mask rpix=2.6, npix_max = 38, mask sum = 30, frac = 0.772
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 47 for pass 1, mean size = 11.38"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src47.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src47.csv
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src47_1.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src47.csv
[Wed May 29 12:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src47.ximg exists
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists
[Wed May 29 12:15:31 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly
[Wed May 29 12:16:06 2013] Warning, spatial fit 47 centroid is now closest to src. 98
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:55 2013] XMMSAS src. selection expression = ellipse(33708.338989, 34901.039215, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:55 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61_src.reg
[Wed May 29 12:16:55 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (351, 364) - (426, 439)
[Wed May 29 12:16:55 2013] XMMSAS bgd. selection expression = annulus(33708.338989, 34901.039215, 1087.500000, 2175.000000, X, Y) && !ellipse(34447.000000, 34483.594269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(31340.097992, 35229.689362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32313.824677, 34228.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32873.072083, 33959.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 34090.941986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34190.741882, 32483.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.045227, 32052.564484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33248.294000, 35620.648000, 1781.792051, 1781.792051, 0.000000, X, Y) && !ellipse(31564.185120, 34568.427765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34281.628845, 33628.396057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34280.527008, 33077.150909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31743.014618, 35765.203461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.777832, 35529.235077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32378.750763, 35182.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33289.174000, 35981.924000, 1804.536052, 1804.536052, 0.000000, X, Y) && !ellipse(30484.924000, 35014.820000, 1256.272036, 1256.272036, 0.000000, X, Y) && !ellipse(35538.580780, 34470.908539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33030.196716, 34401.105164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35029.510773, 34128.927490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.631500, 33878.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36359.134000, 33100.037082, 1757.800051, 1757.800051, 0.000000, X, Y) && !ellipse(35485.687286, 33022.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.016000, 32363.970000, 1763.640051, 483.244814, 90.000000, X, Y) && !ellipse(36336.658691, 32499.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35678.352142, 32582.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36147.840000, 31067.652000, 1728.192050, 1728.192050, 0.000000, X, Y) && !ellipse(35804.134000, 31661.578000, 2764.000080, 345.500010, 346.602000, X, Y) && !ellipse(35242.176000, 31228.778000, 1780.584051, 1780.584051, 0.000000, X, Y)
[Wed May 29 12:16:55 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61.gif
[Wed May 29 12:46:35 2013] Mean detx,y = (7935.61, 5812.18) 
[Wed May 29 12:46:36 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:46:57 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:46:57 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed May 29 12:46:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Wed May 29 14:31:08 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:31:08 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:10 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:10 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61_src_b10.pi.gz = 2664.00
[Wed May 29 17:52:10 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61_bgd.pi.gz = 0.00
[Wed May 29 17:52:10 2013] Got source and background scale factors 948712.000000, 0.000000
[Wed May 29 17:52:10 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:18 2013] Using photon index=1.80, rate=0.0342, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61.arf
[Wed May 29 17:52:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:18 2013] Updating source flux to 8.8e-13
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src61_pl.csv not found, spectral fit skipped or did not complete