[Wed May 29 12:13:09 2013] Detection parameters:
  Position = (323.1, 490.9) = 5 34 28.90 22 13 33.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 339.9 +/- 31.5
  Background counts = 160.7
  Rate = 0.02 +/- 0.002

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 14.07'
[Wed May 29 12:14:01 2013] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 13.46"
[Wed May 29 12:14:01 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.083
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 42 for pass 0, mean size = 13.46"
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src42.ximg exists
[Wed May 29 12:14:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src42.csv
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src42_1.ximg exists
[Wed May 29 12:14:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src42.csv
[Wed May 29 12:14:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Wed May 29 12:14:07 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Wed May 29 12:14:42 2013] Warning, spatial fit 42 centroid is now closest to src. 73
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 36
[Wed May 29 12:14:42 2013] Source is confused with source 56
[Wed May 29 12:14:42 2013] Source is confused with source 57
[Wed May 29 12:15:27 2013] Using EEF radius (= 13.46 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 13.46"
[Wed May 29 12:15:27 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.083
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 13.46"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src41.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src41.csv
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src41.csv
[Wed May 29 12:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed May 29 12:15:31 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed May 29 12:16:06 2013] Spatial fit model total counts = 4458.920000, observed total counts = 4449.000000
[Wed May 29 12:16:06 2013] Offset between fit and detection position for source 55 = 2.029824 pixels
[Wed May 29 12:16:06 2013] Warning, changing simple spatial fit ID from 41 to 25
[Wed May 29 12:16:06 2013] 4146.906000 total counts/ 3857.480000 bgd. counts: snr = 4.659998
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 2.029824 pixels
  Position = (321.3, 490.1) = 5 34 29.48 22 13 26.5
  Extent = 13.1 (9.7-24.3)", rotation angle = 0
  Source counts = 289.4 +/- 64.4
  Background counts = 3857.5
  Rate = 0.02 +/- 0.003
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:54 2013] XMMSAS src. selection expression = ellipse(27903.482000, 42588.180000, 784.380023, 784.380023, 0.000000, X, Y)
[Wed May 29 12:16:54 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55_src.reg
[Wed May 29 12:16:54 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (276, 445) - (366, 535)
[Wed May 29 12:16:54 2013] XMMSAS bgd. selection expression = annulus(27903.482000, 42588.180000, 1307.300038, 2614.600075, X, Y) && !ellipse(28053.694763, 41017.565613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27383.648000, 39945.006000, 1933.592056, 1933.592056, 0.000000, X, Y) && !ellipse(27835.023895, 42227.048279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27800.617371, 39359.295380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(28348.453461, 43015.055664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28594.556091, 42496.071777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27957.171173, 43613.337311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28152.222900, 44013.864410, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:54 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55.gif
[Wed May 29 12:40:02 2013] Mean detx,y = (15309.35, -184.80) 
[Wed May 29 12:40:03 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:40:19 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:40:19 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed May 29 12:40:19 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Wed May 29 17:52:09 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:09 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55_src_b10.pi.gz = 3102.00
[Wed May 29 17:52:09 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55_bgd.pi.gz = 0.00
[Wed May 29 17:52:09 2013] Got source and background scale factors 1934400.000000, 0.000000
[Wed May 29 17:52:09 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:18 2013] Using photon index=1.80, rate=0.0152, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55.arf
[Wed May 29 17:52:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:18 2013] Updating source flux to 5.2e-13
[Wed May 29 17:52:46 2013] Flag c found in src. 55 procflags, skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src55_pl.csv not found, spectral fit skipped or did not complete