[Wed May 29 12:13:09 2013] Detection parameters:
  Position = (388.5, 251.1) = 5 34 8.48 21 56 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 405.4 +/- 32.6
  Background counts = 428.2
  Rate = 0.04 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 7.38'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.12"
[Wed May 29 12:14:01 2013] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.532
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 10.12"
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src41.ximg exists
[Wed May 29 12:14:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src41.csv
[Wed May 29 12:14:04 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src41_1.ximg exists
[Wed May 29 12:14:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src41.csv
[Wed May 29 12:14:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Wed May 29 12:14:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src41.csv
[Wed May 29 12:14:07 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Wed May 29 12:14:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src41.csv
[Wed May 29 12:14:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:42 2013] Warning, spatial fit 41 centroid is now closest to src. 33
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.12"
[Wed May 29 12:15:27 2013] source mask rpix=2.3, npix_max = 31, mask sum = 17, frac = 0.532
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 10.12"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src40.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src40.csv
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src40_1.ximg exists
[Wed May 29 12:15:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src40.csv
[Wed May 29 12:15:29 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Wed May 29 12:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Wed May 29 12:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src40.csv
[Wed May 29 12:15:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:06 2013] Spatial fit model total counts = 6843.380000, observed total counts = 3618.000000
[Wed May 29 12:16:06 2013] Poor agreement between spatial fit and data for source 54
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:54 2013] XMMSAS src. selection expression = ellipse(33751.002655, 21792.964432, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:54 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54_src.reg
[Wed May 29 12:16:54 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (351, 214) - (426, 289)
[Wed May 29 12:16:54 2013] XMMSAS bgd. selection expression = annulus(33751.002655, 21792.964432, 1087.500000, 2175.000000, X, Y) && !ellipse(33411.299622, 19856.944946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33961.227875, 24828.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33895.239777, 23784.705017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34619.589697, 24865.843951, 1663.608048, 665.314434, 90.000000, X, Y) && !ellipse(33756.432190, 23010.607330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33838.990326, 24137.253082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34869.643494, 23606.520691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35170.166260, 23867.897705, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34783.047058, 21694.150879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33768.621429, 19265.793381, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35742.154000, 24602.660000, 1240.816036, 1240.816036, 0.000000, X, Y) && !ellipse(34208.626160, 20841.788239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33664.002655, 21012.989838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35092.740295, 23363.115570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35017.924225, 22549.561493, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34773.064148, 22226.688690, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34893.844086, 22043.632385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35593.154000, 21571.384000, 1407.472040, 1407.472040, 0.000000, X, Y) && !ellipse(35308.764099, 21289.217758, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:54 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54.gif
[Wed May 29 12:39:44 2013] Mean detx,y = (-5094.98, 6864.15) 
[Wed May 29 12:39:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:39:55 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:39:55 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Wed May 29 12:39:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Wed May 29 14:15:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 14:15:47 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:09 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:09 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54_src_b10.pi.gz = 2899.00
[Wed May 29 17:52:09 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54_bgd.pi.gz = 414.00
[Wed May 29 17:52:09 2013] Got source and background scale factors 868740.000000, 195759.000000
[Wed May 29 17:52:09 2013] User source parameters:
  Position = (388.5, 251.1) = 5 34 8.48 21 56 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1061.7 +/- 54.8
  Background aperture counts = 1837.3
  Rate = 0.06 +/- 0.003

[Wed May 29 17:52:09 2013] Updating counts from extracted products
[Wed May 29 17:52:09 2013] Set source signif. to 1061.75/42.86 = 24.77
[Wed May 29 17:52:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:18 2013] Using photon index=1.80, rate=0.0558, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54.arf
[Wed May 29 17:52:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:18 2013] Updating source flux to 1.3e-12
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src54_pl.csv not found, spectral fit skipped or did not complete