[Wed May 29 12:13:08 2013] Detection parameters:
  Position = (280.2, 396.0) = 5 34 42.36 22 6 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.4 +/- 33.3
  Background counts = 458.2
  Rate = 0.03 +/- 0.002

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 7.19'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.03"
[Wed May 29 12:14:01 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.667
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 10.03"
[Wed May 29 12:14:03 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src21.ximg exists
[Wed May 29 12:14:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src21.csv
[Wed May 29 12:14:03 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed May 29 12:14:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src21.csv
[Wed May 29 12:14:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed May 29 12:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed May 29 12:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src21.csv
[Wed May 29 12:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:42 2013] Warning, spatial fit 21 centroid is now closest to src. 28
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 90
[Wed May 29 12:14:42 2013] Source is confused with source 94
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.03"
[Wed May 29 12:15:27 2013] source mask rpix=2.3, npix_max = 31, mask sum = 21, frac = 0.667
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 20 for pass 1, mean size = 10.03"
[Wed May 29 12:15:28 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src20.ximg exists
[Wed May 29 12:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src20.csv
[Wed May 29 12:15:28 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src20_1.ximg exists
[Wed May 29 12:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src20.csv
[Wed May 29 12:15:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Wed May 29 12:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed May 29 12:15:31 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Wed May 29 12:15:31 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src20.csv
[Wed May 29 12:15:31 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:06 2013] Warning, spatial fit 20 centroid is now closest to src. 84
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:53 2013] XMMSAS src. selection expression = ellipse(24326.516846, 34401.766266, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:53 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29_src.reg
[Wed May 29 12:16:53 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (243, 358) - (318, 433)
[Wed May 29 12:16:53 2013] XMMSAS bgd. selection expression = annulus(24326.516846, 34401.766266, 1087.500000, 2175.000000, X, Y) && !ellipse(27758.680247, 34332.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(25728.960000, 35640.788000, 684.368820, 684.368820, 0.000000, X, Y) && !ellipse(25981.327576, 34310.807617, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(23648.565735, 34395.043732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.150800, 36279.786000, 1695.384049, 1695.384049, 0.000000, X, Y) && !ellipse(26248.014648, 34491.057556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27200.434723, 36139.082031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24369.615936, 35593.571747, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24188.862000, 34972.450000, 1681.952048, 1681.952048, 0.000000, X, Y) && !ellipse(23511.887482, 34899.982513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.514038, 34555.303955, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22865.045349, 34664.245117, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:53 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29.gif
[Wed May 29 12:23:46 2013] Mean detx,y = (7096.57, -3407.86) 
[Wed May 29 12:23:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:24:06 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:24:06 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Wed May 29 12:24:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Wed May 29 13:52:54 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 13:52:54 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:06 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:06 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29_src_b10.pi.gz = 3244.00
[Wed May 29 17:52:06 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29_bgd.pi.gz = 0.00
[Wed May 29 17:52:06 2013] Got source and background scale factors 937200.000000, 0.000000
[Wed May 29 17:52:06 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:18 2013] Using photon index=1.80, rate=0.0257, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29.arf
[Wed May 29 17:52:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:18 2013] Updating source flux to 6.5e-13
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src29_pl.csv not found, spectral fit skipped or did not complete