[Wed May 29 12:13:08 2013] Detection parameters:
  Position = (394.2, 332.0) = 5 34 6.69 22 1 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 892.3 +/- 50.9
  Background counts = 585.1
  Rate = 0.06 +/- 0.004

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 7.35'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 29 12:14:01 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.11"
[Wed May 29 12:14:03 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src10.ximg exists
[Wed May 29 12:14:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src10.csv
[Wed May 29 12:14:03 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed May 29 12:14:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src10.csv
[Wed May 29 12:14:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed May 29 12:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed May 29 12:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Wed May 29 12:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:42 2013] Source 17 is offset by 7.866116 and -0.164941 pixels which is larger than
2 X fitted extent = 2.170313 x 2.170313, not incorporating fit results
[Wed May 29 12:14:42 2013] Warning, spatial fit 10 centroid is now closest to src. 18
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 16
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.11 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.11"
[Wed May 29 12:15:27 2013] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.941
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 10.11"
[Wed May 29 12:15:28 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src10.ximg exists
[Wed May 29 12:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src10.csv
[Wed May 29 12:15:28 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed May 29 12:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src10.csv
[Wed May 29 12:15:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:30 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed May 29 12:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May 29 12:15:30 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed May 29 12:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Wed May 29 12:15:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:06 2013] Spatial fit model total counts = 15254.400000, observed total counts = 14419.000000
[Wed May 29 12:16:06 2013] Offset between fit and detection position for source 17 = 1.166394 pixels
[Wed May 29 12:16:06 2013] Warning, changing simple spatial fit ID from 10 to 1
[Wed May 29 12:16:06 2013] 14891.799000 total counts/ 14305.800000 bgd. counts: snr = 4.899376
Spatial fit parameters:
  Offset between fit and detection position for source 17 = 1.166394 pixels
  Position = (394.4, 330.9) = 5 34 6.63 22 1 53.9
  Extent = 16.5 (8.3-20.9)", rotation angle = 0
  Source counts = 586.0 +/- 122.0
  Background counts = 14305.8
  Rate = 0.03 +/- 0.006
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:52 2013] XMMSAS src. selection expression = ellipse(34261.452000, 28738.756000, 988.326028, 988.326028, 0.000000, X, Y)
[Wed May 29 12:16:52 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17_src.reg
[Wed May 29 12:16:52 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (338, 274) - (451, 388)
[Wed May 29 12:16:52 2013] XMMSAS bgd. selection expression = annulus(34261.452000, 28738.756000, 1647.210047, 3294.420095, X, Y) && !ellipse(35058.947083, 29008.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35313.466156, 30057.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.586000, 26415.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(34219.219727, 29346.744476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34196.848450, 28402.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35136.489868, 28319.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.929382, 27544.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34012.002655, 26144.426025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33963.065155, 25441.074249, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33961.227875, 24828.598816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34722.956000, 30515.594000, 819.120024, 819.120024, 0.000000, X, Y) && !ellipse(34619.589697, 24865.843951, 1663.608048, 665.314434, 90.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(34190.741882, 32483.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.045227, 32052.564484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.294000, 29672.785400, 1692.224049, 1692.224049, 0.000000, X, Y) && !ellipse(35270.353790, 26319.097748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35280.071198, 25436.698761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36359.134000, 33100.037082, 1757.800051, 1757.800051, 0.000000, X, Y) && !ellipse(34944.016000, 32363.970000, 1763.640051, 483.244814, 90.000000, X, Y) && !ellipse(36336.658691, 32499.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35678.352142, 32582.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36147.840000, 31067.652000, 1728.192050, 1728.192050, 0.000000, X, Y) && !ellipse(35804.134000, 31661.578000, 2764.000080, 345.500010, 346.602000, X, Y) && !ellipse(35242.176000, 31228.778000, 1780.584051, 1780.584051, 0.000000, X, Y) && !ellipse(35363.497528, 30483.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35238.549194, 29622.718842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35652.276000, 26202.148000, 706.359220, 706.359220, 0.000000, X, Y) && !ellipse(34446.654000, 25635.213000, 1272.216037, 1272.216037, 0.000000, X, Y) && !ellipse(35742.154000, 24602.660000, 1240.816036, 1240.816036, 0.000000, X, Y)
[Wed May 29 12:16:52 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17.gif
[Wed May 29 12:18:46 2013] Mean detx,y = (1824.03, 7010.32) 
[Wed May 29 12:18:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:19:09 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:19:09 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Wed May 29 12:19:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Wed May 29 17:52:04 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:04 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17_src_b10.pi.gz = 12193.00
[Wed May 29 17:52:05 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17_bgd.pi.gz = 10476.00
[Wed May 29 17:52:05 2013] Got source and background scale factors 2054276.000000, 3623737.000000
[Wed May 29 17:52:05 2013] User source parameters:
  Position = (394.4, 330.9) = 5 34 6.63 22 1 53.9
  Extent = 16.5 (8.3-20.9)", rotation angle = 0
  Source aperture counts = 6254.2 +/- 111.4
  Background aperture counts = 5938.8
  Rate = 0.3 +/- 0.006

[Wed May 29 17:52:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:18 2013] Using photon index=1.80, rate=0.0308, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17.arf
[Wed May 29 17:52:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:18 2013] Updating source flux to 5.3e-13
[Wed May 29 17:52:46 2013] Flag b found in src. 17 procflags, skipping spectral fitting
[Wed May 29 17:52:46 2013] Flag c found in src. 17 procflags, skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src17_pl.csv not found, spectral fit skipped or did not complete