[Wed May 29 12:13:08 2013] Detection parameters:
  Position = (352.3, 391.9) = 5 34 19.78 22 6 11.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 638.3 +/- 45.9
  Background counts = 599.4
  Rate = 0.06 +/- 0.004

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 7.82'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Wed May 29 12:14:01 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.816
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 8 for pass 0, mean size = 10.34"
[Wed May 29 12:14:03 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src8.ximg exists
[Wed May 29 12:14:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src8.csv
[Wed May 29 12:14:03 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed May 29 12:14:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src8.csv
[Wed May 29 12:14:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed May 29 12:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed May 29 12:14:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed May 29 12:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:42 2013] Source 15 is offset by -0.155314 and 4.706286 pixels which is larger than
2 X fitted extent = 1.188630 x 1.188630, not incorporating fit results
[Wed May 29 12:14:42 2013] Source 15 is offset by -1.757208 and -6.801208 pixels which is larger than
2 X fitted extent = 2.532717 x 2.532717, not incorporating fit results
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.34"
[Wed May 29 12:15:27 2013] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.816
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 8 for pass 1, mean size = 10.34"
[Wed May 29 12:15:28 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src8.ximg exists
[Wed May 29 12:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src8.csv
[Wed May 29 12:15:28 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src8_1.ximg exists
[Wed May 29 12:15:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src8.csv
[Wed May 29 12:15:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:30 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Wed May 29 12:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May 29 12:15:30 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Wed May 29 12:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src8.csv
[Wed May 29 12:15:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:06 2013] Warning, spatial fit 8 centroid is now closest to src. 41
[Wed May 29 12:16:06 2013] Spatial fit model total counts = 8526.760000, observed total counts = 7497.000000
[Wed May 29 12:16:06 2013] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed May 29 12:16:06 2013] Source 15 is offset by -2.103783 and -3.152015 pixels which is larger than
2 X fitted extent = 1.376248 x 9.702345, not incorporating fit results
[Wed May 29 12:16:06 2013] Source 15 is offset by -0.825852 and 2.796493 pixels which is larger than
2 X fitted extent = 1.234074 x 1.234074, not incorporating fit results
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:06 2013] Source is confused with source 60
[Wed May 29 12:16:52 2013] XMMSAS src. selection expression = ellipse(30601.914886, 34049.066864, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:52 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15_src.reg
[Wed May 29 12:16:52 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (315, 354) - (390, 429)
[Wed May 29 12:16:52 2013] XMMSAS bgd. selection expression = annulus(30601.914886, 34049.066864, 1087.500000, 2175.000000, X, Y) && !ellipse(28790.672000, 34553.606000, 963.984028, 963.984028, 0.000000, X, Y) && !ellipse(27758.680247, 34332.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(29750.566467, 34173.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(31340.097992, 35229.689362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32313.824677, 34228.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32873.072083, 33959.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 34090.941986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27901.150800, 36279.786000, 1695.384049, 1695.384049, 0.000000, X, Y) && !ellipse(33248.294000, 35620.648000, 1781.792051, 1781.792051, 0.000000, X, Y) && !ellipse(30113.226000, 34850.174000, 1390.704040, 1390.704040, 0.000000, X, Y) && !ellipse(31564.185120, 34568.427765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28436.490800, 36727.100000, 1798.800052, 1798.800052, 0.000000, X, Y) && !ellipse(31743.014618, 35765.203461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32378.750763, 35182.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29303.937439, 35183.088287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33289.174000, 35981.924000, 1804.536052, 1804.536052, 0.000000, X, Y) && !ellipse(30484.924000, 35014.820000, 1256.272036, 1256.272036, 0.000000, X, Y) && !ellipse(33030.196716, 34401.105164, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:52 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15.gif
[Wed May 29 12:17:46 2013] Mean detx,y = (7077.89, 2859.69) 
[Wed May 29 12:17:47 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 12:18:08 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 12:18:08 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed May 29 12:18:08 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed May 29 13:43:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 13:43:52 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:04 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:04 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15_src_b10.pi.gz = 5269.00
[Wed May 29 17:52:04 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15_bgd.pi.gz = 0.00
[Wed May 29 17:52:04 2013] Got source and background scale factors 949042.000000, 0.000000
[Wed May 29 17:52:04 2013] Background scale factor is not positive, halting re-assessment of this source
[Wed May 29 17:52:18 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:18 2013] Using photon index=1.80, rate=0.0598, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15.arf
[Wed May 29 17:52:18 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:18 2013] Updating source flux to 1.3e-12
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src15_pl.csv not found, spectral fit skipped or did not complete