[Wed May 29 12:13:11 2013] Detection parameters:
  Position = (407.0, 350.9) = 5 34 2.66 22 3 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 284.2 +/- 31.0
  Background counts = 516.8
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 8.75'
[Wed May 29 12:14:01 2013] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 10.80"
[Wed May 29 12:14:01 2013] source mask rpix=2.5, npix_max = 35, mask sum = 19, frac = 0.534
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 95 for pass 0, mean size = 10.80"
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src95.ximg exists
[Wed May 29 12:14:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src95.csv
[Wed May 29 12:14:06 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src95_1.ximg exists
[Wed May 29 12:14:06 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src95.csv
[Wed May 29 12:14:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src95_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src95.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:08 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95.ximg exists
[Wed May 29 12:14:08 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95_1.ximg exists
[Wed May 29 12:14:08 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src95 appears to have run properly
[Wed May 29 12:14:42 2013] Source 110 is offset by 2.541420 and -1.639089 pixels which is larger than
2 X fitted extent = 1.187936 x 1.187936, not incorporating fit results
[Wed May 29 12:14:42 2013] Warning, spatial fit 95 centroid is now closest to src. 107
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:14:42 2013] Source is confused with source 9
[Wed May 29 12:15:27 2013] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 10.80"
[Wed May 29 12:15:27 2013] source mask rpix=2.5, npix_max = 35, mask sum = 19, frac = 0.534
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 87 for pass 1, mean size = 10.80"
[Wed May 29 12:15:30 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src87.ximg exists
[Wed May 29 12:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src87.csv
[Wed May 29 12:15:30 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src87_1.ximg exists
[Wed May 29 12:15:30 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src87.csv
[Wed May 29 12:15:30 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src87.ximg exists
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src87_1.ximg exists
[Wed May 29 12:15:32 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src87 appears to have run properly
[Wed May 29 12:16:06 2013] Source 110 is offset by 2.719213 and -1.374537 pixels which is larger than
2 X fitted extent = 1.226906 x 1.226906, not incorporating fit results
[Wed May 29 12:16:06 2013] Warning, spatial fit 87 centroid is now closest to src. 107
[Wed May 29 12:16:06 2013] Source 110 is offset by -6.600580 and 0.305670 pixels which is larger than
2 X fitted extent = 1.079379 x 1.079379, not incorporating fit results
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed May 29 12:16:57 2013] XMMSAS src. selection expression = ellipse(35363.497528, 30483.341278, 652.500000, 652.500000, 0.000000, X, Y)
[Wed May 29 12:16:57 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110_src.reg
[Wed May 29 12:16:57 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (370, 313) - (445, 388)
[Wed May 29 12:16:57 2013] XMMSAS bgd. selection expression = annulus(35363.497528, 30483.341278, 1087.500000, 2175.000000, X, Y) && !ellipse(35058.947083, 29008.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35313.466156, 30057.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.586000, 26415.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(34219.219727, 29346.744476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.452000, 28738.756000, 1317.768038, 1317.768038, 0.000000, X, Y) && !ellipse(34196.848450, 28402.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35136.489868, 28319.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.929382, 27544.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34722.956000, 30515.594000, 819.120024, 819.120024, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(34190.741882, 32483.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.045227, 32052.564484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.294000, 29672.785400, 1692.224049, 1692.224049, 0.000000, X, Y) && !ellipse(34280.527008, 33077.150909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36359.134000, 33100.037082, 1757.800051, 1757.800051, 0.000000, X, Y) && !ellipse(35485.687286, 33022.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34944.016000, 32363.970000, 1763.640051, 483.244814, 90.000000, X, Y) && !ellipse(36336.658691, 32499.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35678.352142, 32582.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36147.840000, 31067.652000, 1728.192050, 1728.192050, 0.000000, X, Y) && !ellipse(35804.134000, 31661.578000, 2764.000080, 345.500010, 346.602000, X, Y) && !ellipse(35242.176000, 31228.778000, 1780.584051, 1780.584051, 0.000000, X, Y) && !ellipse(35238.549194, 29622.718842, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:57 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110.gif
[Wed May 29 13:16:44 2013] Mean detx,y = (3625.03, 7802.06) 
[Wed May 29 13:16:45 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 13:17:02 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 13:17:03 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110_src_b10.pi.gz
[Wed May 29 13:17:03 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110_bgd.pi.gz
[Wed May 29 15:10:07 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed May 29 15:10:07 2013] rmf not generated due to insufficient counts
[Wed May 29 17:52:15 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:15 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110_src_b10.pi.gz = 4795.00
[Wed May 29 17:52:15 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110_bgd.pi.gz = 2731.00
[Wed May 29 17:52:15 2013] Got source and background scale factors 1209072.000000, 900976.000000
[Wed May 29 17:52:15 2013] User source parameters:
  Position = (407.0, 350.9) = 5 34 2.66 22 3 26.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1130.1 +/- 70.3
  Background aperture counts = 3664.9
  Rate = 0.06 +/- 0.004

[Wed May 29 17:52:15 2013] Updating counts from extracted products
[Wed May 29 17:52:15 2013] Set source signif. to 1130.11/60.54 = 18.67
[Wed May 29 17:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:19 2013] Using photon index=1.80, rate=0.0594, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110.arf
[Wed May 29 17:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:19 2013] Updating source flux to 1.2e-12
[Wed May 29 17:52:46 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src110_pl.csv not found, spectral fit skipped or did not complete