[Wed May 29 12:13:11 2013] Detection parameters:
  Position = (400.2, 373.9) = 5 34 4.78 22 5 1.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 371.4 +/- 38.2
  Background counts = 426.5
  Rate = 0.03 +/- 0.003

[Wed May 29 12:13:12 2013] Off-axis axis estimate = 9.19'
[Wed May 29 12:14:01 2013] Using EEF radius (= 11.02 ")to estimate initial spatial extent for simple fitting
[Wed May 29 12:14:01 2013] Initial guess for spatial extent in simple fitting = 11.02"
[Wed May 29 12:14:01 2013] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.978
[Wed May 29 12:14:01 2013] Giving source the simple spatial ID 90 for pass 0, mean size = 11.02"
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src90.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src90.csv
[Wed May 29 12:14:05 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src90_1.ximg exists
[Wed May 29 12:14:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src90.csv
[Wed May 29 12:14:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:08 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.ximg exists
[Wed May 29 12:14:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.csv
[Wed May 29 12:14:08 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg exists
[Wed May 29 12:14:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.csv
[Wed May 29 12:14:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass0_tfrozen_src90.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:14:42 2013] Warning, spatial fit 90 centroid is now closest to src. 106
[Wed May 29 12:14:42 2013] Spatial fit model total counts = 5476.510000, observed total counts = 5436.000000
[Wed May 29 12:14:42 2013] Offset between fit and detection position for source 104 = 2.409020 pixels
[Wed May 29 12:14:42 2013] Warning, changing simple spatial fit ID from 90 to 92
[Wed May 29 12:14:42 2013] 5464.111000 total counts/ 5152.540000 bgd. counts: snr = 4.340566
Spatial fit parameters:
  Offset between fit and detection position for source 104 = 2.409020 pixels
  Position = (402.2, 372.6) = 5 34 4.16 22 4 55.1
  Extent = 22.0 (19.0-44.1)" x 6.0 (4.5-10.3)", rotation angle = 90 (90-90) degrees
  Source counts = 311.6 +/- 73.9
  Background counts = 5152.5
  Rate = 0.02 +/- 0.004
[Wed May 29 12:14:42 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:14:42 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:14:42 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:14:42 2013] Source does appear to be extended
[Wed May 29 12:14:42 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.84
[Wed May 29 12:14:42 2013] Source is asymmetric
[Wed May 29 12:14:42 2013] Source is confused with source 46
[Wed May 29 12:15:27 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed May 29 12:15:27 2013] Initial guess for spatial extent in simple fitting = 14.04"
[Wed May 29 12:15:27 2013] source mask rpix=3.2, npix_max = 55, mask sum = 54, frac = 0.971
[Wed May 29 12:15:27 2013] Giving source the simple spatial ID 81 for pass 1, mean size = 14.04"
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src81.ximg exists
[Wed May 29 12:15:29 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src81_1.ximg exists
[Wed May 29 12:15:30 2013] Fit fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_src81 appears to have run properly
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src81.ximg exists
[Wed May 29 12:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src81.csv
[Wed May 29 12:15:32 2013] fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src81_1.ximg exists
[Wed May 29 12:15:32 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src81.csv
[Wed May 29 12:15:32 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592401_pi300-10000_cl_pass1_tfrozen_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May 29 12:16:06 2013] Warning, spatial fit 81 centroid is now closest to src. 44
[Wed May 29 12:16:06 2013] Vigneting correction estimate = 1.000000
[Wed May 29 12:16:06 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed May 29 12:16:06 2013] Assessing source extent using major axis lower bound
[Wed May 29 12:16:06 2013] Source does appear to be extended
[Wed May 29 12:16:06 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.84
[Wed May 29 12:16:06 2013] Source is asymmetric
[Wed May 29 12:16:57 2013] XMMSAS src. selection expression = ellipse(34944.016000, 32363.970000, 1322.730038, 362.433610, 90.000000, X, Y)
[Wed May 29 12:16:57 2013] Not overwriting source region fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104_src.reg
[Wed May 29 12:16:57 2013] Extracting stamp from image fullrun_mos1_xmm0412592401_pi300-10000_cl_sm2.00.img.gz, (326, 297) - (478, 449)
[Wed May 29 12:16:57 2013] XMMSAS bgd. selection expression = annulus(34944.016000, 32363.970000, 2204.550063, 4409.100127, X, Y) && !ellipse(35058.947083, 29008.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34447.000000, 34483.594269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35313.466156, 30057.339172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34181.586000, 26415.691680, 2267.792065, 2267.792065, 0.000000, X, Y) && !ellipse(30601.914886, 34049.066864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34219.219727, 29346.744476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34261.452000, 28738.756000, 1317.768038, 1317.768038, 0.000000, X, Y) && !ellipse(34196.848450, 28402.929352, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35136.489868, 28319.075562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34043.929382, 27544.932739, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29750.566467, 34173.733765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34722.956000, 30515.594000, 819.120024, 819.120024, 0.000000, X, Y) && !ellipse(27884.761600, 35234.056000, 10161.600292, 10161.600292, 0.000000, X, Y) && !ellipse(31340.097992, 35229.689362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32313.824677, 34228.220276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32873.072083, 33959.855225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 34090.941986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34190.741882, 32483.406708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34492.045227, 32052.564484, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34338.294000, 29672.785400, 1692.224049, 1692.224049, 0.000000, X, Y) && !ellipse(33248.294000, 35620.648000, 1781.792051, 1781.792051, 0.000000, X, Y) && !ellipse(30113.226000, 34850.174000, 1390.704040, 1390.704040, 0.000000, X, Y) && !ellipse(33708.338989, 34901.039215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31564.185120, 34568.427765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34281.628845, 33628.396057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34280.527008, 33077.150909, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31743.014618, 35765.203461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34750.777832, 35529.235077, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32378.750763, 35182.525421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33289.174000, 35981.924000, 1804.536052, 1804.536052, 0.000000, X, Y) && !ellipse(30484.924000, 35014.820000, 1256.272036, 1256.272036, 0.000000, X, Y) && !ellipse(35538.580780, 34470.908539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33030.196716, 34401.105164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35029.510773, 34128.927490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35412.631500, 33878.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36359.134000, 33100.037082, 1757.800051, 1757.800051, 0.000000, X, Y) && !ellipse(35485.687286, 33022.409515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36336.658691, 32499.039520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35678.352142, 32582.901276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36147.840000, 31067.652000, 1728.192050, 1728.192050, 0.000000, X, Y) && !ellipse(35804.134000, 31661.578000, 2764.000080, 345.500010, 346.602000, X, Y) && !ellipse(35242.176000, 31228.778000, 1780.584051, 1780.584051, 0.000000, X, Y) && !ellipse(35363.497528, 30483.341278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35238.549194, 29622.718842, 870.000000, 870.000000, 0.000000, X, Y)
[Wed May 29 12:16:57 2013] Writing fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104.gif
[Wed May 29 13:09:32 2013] Mean detx,y = (5417.53, 7303.30) 
[Wed May 29 13:09:33 2013] Setting backscal keywords in source and bgd. spectrum
[Wed May 29 13:09:54 2013] Binned source spectrum to 10 counts/bin
[Wed May 29 13:09:55 2013] Setting source spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104_src_b10.pi.gz
[Wed May 29 13:09:55 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104_bgd.pi.gz
[Wed May 29 17:52:14 2013] Updating aperture counts using extracted products
[Wed May 29 17:52:14 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104_src_b10.pi.gz = 5470.00
[Wed May 29 17:52:14 2013] Total counts from fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104_bgd.pi.gz = 14962.00
[Wed May 29 17:52:14 2013] Got source and background scale factors 1483524.000000, 8133624.000000
[Wed May 29 17:52:14 2013] User source parameters:
  Position = (402.2, 372.6) = 5 34 4.16 22 4 55.1
  Extent = 22.0 (19.0-44.1)" x 6.0 (4.5-10.3)", rotation angle = 90 (90-90) degrees
  Source aperture counts = 2741.0 +/- 75.0
  Background aperture counts = 2729.0
  Rate = 0.1 +/- 0.004

[Wed May 29 17:52:19 2013] Calculating source flux in energy range 0.30-8.00
[Wed May 29 17:52:19 2013] Using photon index=1.80, rate=0.0164, arf fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104.arf
[Wed May 29 17:52:19 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Wed May 29 17:52:19 2013] Updating source flux to 3.5e-13
[Wed May 29 17:52:46 2013] Flag c found in src. 104 procflags, skipping spectral fitting
[Wed May 29 17:53:07 2013] xmm0412592401/analysis//spectral/fullrun_mos1_xmm0412592401_pi300-10000_pass1_cl_src104_pl.csv not found, spectral fit skipped or did not complete