[Sat May  5 10:33:17 2012] Detection parameters:
  Position = (366.1, 288.9) = 5 34 6.47 22 1 32.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 515.8 +/- 40.8
  Background counts = 500.9
  Rate = 0.05 +/- 0.004

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 4.96'
[Sat May  5 21:59:55 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sat May  5 21:59:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.963
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.91"
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src33.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src33.csv
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src33.csv
[Sun May  6 14:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun May  6 14:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun May  6 14:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun May  6 14:30:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 8967.460000, observed total counts = 4866.000000
[Sun May  6 14:31:27 2012] Poor agreement between spatial fit and data for source 95
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 7137.610000, observed total counts = 5785.000000
[Sun May  6 14:31:27 2012] Poor agreement between spatial fit and data for source 95
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 7320.160000, observed total counts = 7340.000000
[Sun May  6 14:31:27 2012] Offset between fit and detection position for source 95 = 0.716780 pixels
[Sun May  6 14:31:27 2012] Warning, changing simple spatial fit ID from 33 to 57
[Sun May  6 14:31:27 2012] 7045.160000 total counts/ 6729.380000 bgd. counts: snr = 3.849436
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 0.716780 pixels
  Position = (366.8, 288.7) = 5 34 6.26 22 1 33.4
  Extent = 9.9 (7.8-11.9)", rotation angle = 0
  Source counts = 315.8 +/- 83.9
  Background counts = 6729.4
  Rate = 0.02 +/- 0.005
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 01:40:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 9.91"
[Mon May  7 01:40:57 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.972
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 33 for pass 1, mean size = 9.91"
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src33.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src33.csv
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src33.csv
[Mon May  7 21:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon May  7 21:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon May  7 21:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src33.csv
[Mon May  7 21:58:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:18 2012] Warning, spatial fit 33 centroid is now closest to src. 98
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 7293.770000, observed total counts = 7340.000000
[Mon May  7 22:00:18 2012] Offset between fit and detection position for source 95 = 1.107207 pixels
[Mon May  7 22:00:18 2012] Warning, changing simple spatial fit ID from 33 to 56
[Mon May  7 22:00:18 2012] 6969.359000 total counts/ 6424.370000 bgd. counts: snr = 6.799429
Spatial fit parameters:
  Offset between fit and detection position for source 95 = 1.107207 pixels
  Position = (366.4, 289.7) = 5 34 6.39 22 1 37.9
  Extent = 18.1 (14.4-36.2)" x 6.7 (5.2-8.9)", rotation angle = 354 (343-4) degrees
  Source counts = 545.0 +/- 83.5
  Background counts = 6424.4
  Rate = 0.04 +/- 0.005
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.61
[Mon May  7 22:00:19 2012] Source is asymmetric
[Mon May  7 22:00:19 2012] Source is confused with source 87
[Mon May  7 22:00:19 2012] Source is confused with source 99
[Mon May  7 22:00:19 2012] Source is confused with source 90
[Mon May  7 22:00:19 2012] Source is confused with source 86
[Tue May  8 05:39:28 2012] XMMSAS src. selection expression = ellipse(31829.272000, 25155.490000, 1086.852031, 400.130412, 354.245000, X, Y)
[Tue May  8 05:39:28 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src95_src.reg
[Tue May  8 05:39:28 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (304, 227) - (429, 352)
[Tue May  8 05:39:28 2012] XMMSAS bgd. selection expression = annulus(31829.272000, 25155.490000, 1811.420052, 3622.840104, X, Y) && !ellipse(31721.015045, 25783.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31482.465973, 22400.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.559998, 22811.230560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.796000, 23327.506000, 1492.968043, 1492.968043, 0.000000, X, Y) && !ellipse(31723.178894, 24139.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31439.616455, 21434.519547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31580.911804, 23612.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33371.394531, 25178.353790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32504.386000, 28004.047200, 1506.568043, 454.138413, -0.000000, X, Y) && !ellipse(32221.365936, 25734.534637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32782.631600, 23414.816000, 1533.368044, 757.201622, -0.000000, X, Y) && !ellipse(31902.969513, 27189.846466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32008.257355, 27951.338074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31577.768250, 26138.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32362.698456, 21102.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.394897, 24138.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32705.258301, 22133.713547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32984.986000, 28475.868000, 1960.704056, 1960.704056, 0.000000, X, Y) && !ellipse(32443.862701, 26931.419189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32565.468353, 26210.876099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32243.676000, 22387.044200, 1546.696045, 1546.696045, 0.000000, X, Y) && !ellipse(33083.541565, 21705.063049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.199921, 25732.094666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.507935, 24314.072723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33165.552000, 23602.960200, 2290.568066, 2290.568066, 0.000000, X, Y)
[Tue May  8 05:39:28 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src95.gif
[Tue May  8 07:04:37 2012] Mean detx,y = (7380.97, -1156.76) 
[Tue May  8 07:04:40 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:05:18 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:05:18 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Tue May  8 07:05:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src95_bgd.pi.gz
[Tue May  8 15:47:21 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:21 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src95_src_b10.pi.gz
[Tue May  8 15:47:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:31 2012] Using photon index=1.80, rate=0.0351, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src95.arf
[Tue May  8 15:47:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:31 2012] Updating source flux to 7.7e-13
[Tue May  8 15:59:15 2012] Flag p found in src. 95 procflags, skipping spectral fitting
[Tue May  8 15:59:15 2012] Flag c found in src. 95 procflags, skipping spectral fitting