[Sat May 5 10:33:13 2012] Detection parameters: Position = (373.9, 335.2) = 5 34 4.05 22 4 48.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 188.9 +/- 32.4 Background counts = 365.6 Rate = 0.02 +/- 0.004 [Sat May 5 10:33:27 2012] Off-axis axis estimate = 6.08' [Sat May 5 21:59:55 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting [Sat May 5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 9.47" [Sat May 5 21:59:55 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.012 [Sat May 5 21:59:55 2012] Giving source the simple spatial ID 87 for pass 0, mean size = 9.47" [Sun May 6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src87.ximg exists [Sun May 6 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src87.csv [Sun May 6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src87_1.ximg exists [Sun May 6 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src87.csv [Sun May 6 14:30:15 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src87_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 14:30:19 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src87.ximg exists [Sun May 6 14:30:19 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists [Sun May 6 14:30:19 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly [Sun May 6 14:31:28 2012] Warning, spatial fit 87 centroid is now closest to src. 76 [Sun May 6 14:31:28 2012] Spatial fit model total counts = 6131.950000, observed total counts = 3835.000000 [Sun May 6 14:31:28 2012] Poor agreement between spatial fit and data for source 75 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 6 14:31:28 2012] Vigneting correction estimate = 1.000000 [Sun May 6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 14:31:28 2012] Assessing source extent using major [Sun May 6 14:31:28 2012] Source does appear to be extended [Sun May 6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 14:31:28 2012] Source is confused with source 78 [Mon May 7 01:40:57 2012] Using EEF radius (= 9.47 ")to estimate initial spatial extent for simple fitting [Mon May 7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 9.47" [Mon May 7 01:40:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 29, frac = 1.012 [Mon May 7 01:40:57 2012] Giving source the simple spatial ID 85 for pass 1, mean size = 9.47" [Mon May 7 21:58:57 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src85.ximg exists [Mon May 7 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src85.csv [Mon May 7 21:58:57 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src85_1.ximg exists [Mon May 7 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src85.csv [Mon May 7 21:58:57 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src85_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src85.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 7 21:59:02 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src85.ximg exists [Mon May 7 21:59:02 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src85_1.ximg exists [Mon May 7 21:59:02 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src85 appears to have run properly [Mon May 7 22:00:18 2012] Spatial fit model total counts = 6741.440000, observed total counts = 6823.000000 [Mon May 7 22:00:18 2012] Offset between fit and detection position for source 75 = 9.342431 pixels [Mon May 7 22:00:18 2012] Warning, changing simple spatial fit ID from 85 to 55 [Mon May 7 22:00:18 2012] 6226.766000 total counts/ 5498.250000 bgd. counts: snr = 9.824871 Spatial fit parameters: Offset between fit and detection position for source 75 = 9.342431 pixels Position = (379.7, 327.9) = 5 34 2.22 22 4 23.9 Extent = 24.5 (24.5-49.0)", rotation angle = 0 Source counts = 728.5 +/- 78.9 Background counts = 5498.2 Rate = 0.05 +/- 0.005 [Mon May 7 22:00:19 2012] Source 75 is offset by -3.012345 and 0.550621 pixels which is larger than 2 X fitted extent = 1.231637 x 1.231637, not incorporating fit results [Mon May 7 22:00:19 2012] Vigneting correction estimate = 1.000000 [Mon May 7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 7 22:00:19 2012] Assessing source extent using major axis lower bound [Mon May 7 22:00:19 2012] Source does appear to be extended [Mon May 7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 05:39:34 2012] XMMSAS src. selection expression = ellipse(32984.986000, 28475.868000, 1470.528042, 1470.528042, 0.000000, X, Y) [Tue May 8 05:39:34 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src75_src.reg [Tue May 8 05:39:34 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (295, 243) - (464, 412) [Tue May 8 05:39:34 2012] XMMSAS bgd. selection expression = annulus(32984.986000, 28475.868000, 2450.880071, 4901.760141, X, Y) && !ellipse(31721.015045, 25783.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.559998, 22811.230560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.796000, 23327.506000, 1492.968043, 1492.968043, 0.000000, X, Y) && !ellipse(31723.178894, 24139.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.272000, 25155.490000, 1449.136042, 533.507215, 354.245000, X, Y) && !ellipse(31580.911804, 23612.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.220215, 31326.567963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33371.394531, 25178.353790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.068000, 31664.856000, 1462.176042, 1462.176042, 0.000000, X, Y) && !ellipse(32504.386000, 28004.047200, 1506.568043, 454.138413, -0.000000, X, Y) && !ellipse(32221.365936, 25734.534637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32782.631600, 23414.816000, 1533.368044, 757.201622, -0.000000, X, Y) && !ellipse(27437.159790, 32223.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31902.969513, 27189.846466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32008.257355, 27951.338074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31577.768250, 26138.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27820.007050, 32134.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.394897, 24138.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.896210, 31251.244781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32443.862701, 26931.419189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32565.468353, 26210.876099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.998000, 33044.646000, 996.600029, 996.600029, 0.000000, X, Y) && !ellipse(32243.676000, 22387.044200, 1546.696045, 1546.696045, 0.000000, X, Y) && !ellipse(29396.112091, 31439.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.199921, 25732.094666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.507935, 24314.072723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.002014, 31246.866638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.390000, 33448.038000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(28880.431061, 31652.087830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33165.552000, 23602.960200, 2290.568066, 2290.568066, 0.000000, X, Y) [Tue May 8 05:39:34 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src75.gif [Tue May 8 08:22:31 2012] Mean detx,y = (7981.97, -4493.57) [Tue May 8 08:22:35 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 8 08:24:13 2012] Binned source spectrum to 10 counts/bin [Tue May 8 08:24:14 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src75_src_b10.pi.gz [Tue May 8 08:24:14 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src75_bgd.pi.gz [Tue May 8 15:47:26 2012] Updating aperture counts using extracted products [Tue May 8 15:47:26 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src75_src_b10.pi.gz [Tue May 8 15:47:36 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 8 15:47:36 2012] Using photon index=1.80, rate=0.047, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src75.arf [Tue May 8 15:47:36 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 8 15:47:36 2012] Updating source flux to 8.3e-13 [Tue May 8 15:59:15 2012] Flag b found in src. 75 procflags, skipping spectral fitting [Tue May 8 15:59:15 2012] Flag p found in src. 75 procflags, skipping spectral fitting [Tue May 8 15:59:15 2012] Flag c found in src. 75 procflags, skipping spectral fitting