[Sat May  5 10:33:12 2012] Detection parameters:
  Position = (327.3, 360.6) = 5 34 18.61 22 6 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 394.7 +/- 31.5
  Background counts = 526.8
  Rate = 0.04 +/- 0.004

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 4.97'
[Sat May  5 21:59:55 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Sat May  5 21:59:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.769
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 8.91"
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src43.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src43.csv
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src43.csv
[Sun May  6 14:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun May  6 14:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun May  6 14:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun May  6 14:30:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Warning, spatial fit 43 centroid is now closest to src. 63
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 9
[Sun May  6 14:31:28 2012] Source is confused with source 63
[Mon May  7 01:40:57 2012] Using EEF radius (= 8.91 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 8.91"
[Mon May  7 01:40:57 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.769
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 42 for pass 1, mean size = 8.91"
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src42.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src42.csv
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src42_1.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src42.csv
[Mon May  7 21:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:00 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src42.ximg exists
[Mon May  7 21:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon May  7 21:59:00 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg exists
[Mon May  7 21:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src42.csv
[Mon May  7 21:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 23989.400000, observed total counts = 5101.000000
[Mon May  7 22:00:18 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Source 72 is offset by 3.676393 and 2.182855 pixels which is larger than
2 X fitted extent = 1.118037 x 1.118037, not incorporating fit results
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:29 2012] XMMSAS src. selection expression = ellipse(28427.220215, 31326.567963, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 05:39:29 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src72_src.reg
[Tue May  8 05:39:29 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (290, 323) - (365, 398)
[Tue May  8 05:39:29 2012] XMMSAS bgd. selection expression = annulus(28427.220215, 31326.567963, 1087.500000, 2175.000000, X, Y) && !ellipse(25436.704071, 31539.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.124000, 34083.068000, 3013.136087, 3013.136087, 0.000000, X, Y) && !ellipse(25531.501892, 32850.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.218903, 32309.342987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.203400, 31675.520000, 1456.152042, 1456.152042, 0.000000, X, Y) && !ellipse(27145.068000, 31664.856000, 1462.176042, 1462.176042, 0.000000, X, Y) && !ellipse(27437.159790, 32223.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.542000, 33005.166200, 1502.352043, 697.861620, 353.317000, X, Y) && !ellipse(27820.007050, 32134.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.861694, 33875.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.896210, 31251.244781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.998000, 33044.646000, 996.600029, 996.600029, 0.000000, X, Y) && !ellipse(29396.112091, 31439.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.002014, 31246.866638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.390000, 33448.038000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(26812.107483, 33268.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28880.431061, 31652.087830, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:29 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src72.gif
[Tue May  8 07:11:19 2012] Mean detx,y = (3385.44, -7264.17) 
[Tue May  8 07:11:22 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:11:55 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:11:57 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue May  8 07:11:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Tue May  8 11:43:49 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 11:43:49 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:22 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:22 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue May  8 15:47:32 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:32 2012] Using photon index=1.80, rate=0.0446, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src72.arf
[Tue May  8 15:47:32 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:32 2012] Updating source flux to 8.5e-13
[Tue May  8 15:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting