[Sat May  5 10:32:58 2012] Detection parameters:
  Position = (201.8, 246.8) = 5 34 57.87 21 58 9.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3327.4 +/- 314.1
  Background counts = 317.9
  Rate = 0.4 +/- 0.03

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 7.94'
[Sat May  5 21:59:55 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Sat May  5 21:59:55 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.897
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.40"
[Sun May  6 14:30:12 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src1.ximg exists
[Sun May  6 14:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src1.csv
[Sun May  6 14:30:12 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May  6 14:30:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src1.csv
[Sun May  6 14:30:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May  6 14:30:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May  6 14:30:15 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun May  6 14:30:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:26 2012] Warning, spatial fit 1 centroid is now closest to src. 107
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 4889.770000, observed total counts = 3044.000000
[Sun May  6 14:31:27 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 117
[Sun May  6 14:31:28 2012] Source is confused with source 112
[Mon May  7 01:40:57 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Mon May  7 01:40:57 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.897
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.40"
[Mon May  7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src1.ximg exists
[Mon May  7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src1.csv
[Mon May  7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May  7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src1.csv
[Mon May  7 21:58:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:58:57 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May  7 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May  7 21:58:57 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May  7 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src1.csv
[Mon May  7 21:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:17 2012] Warning, spatial fit 1 centroid is now closest to src. 117
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:25 2012] Counts = 3327.372070, rescaling region sizes by 2.000000
[Tue May  8 05:39:25 2012] XMMSAS src. selection expression = ellipse(17506.342636, 21425.378281, 1305.000000, 1305.000000, 0.000000, X, Y)
[Tue May  8 05:39:25 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7_src.reg
[Tue May  8 05:39:25 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (127, 172) - (277, 322)
[Tue May  8 05:39:25 2012] XMMSAS bgd. selection expression = annulus(17506.342636, 21425.378281, 4350.000000, 8700.000000, X, Y) && !ellipse(24604.147949, 17524.710129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24063.783112, 17358.973907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.788000, 15694.276200, 1737.040050, 334.660010, 91.136000, X, Y) && !ellipse(24794.387200, 16976.272000, 954.464027, 954.464027, 0.000000, X, Y) && !ellipse(23458.455017, 17432.333694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.602000, 15424.048000, 971.440028, 971.440028, 0.000000, X, Y) && !ellipse(24621.023315, 14934.264420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.036652, 16093.328079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.327393, 13437.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.040253, 17530.745010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.155945, 12735.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24608.028000, 14403.286200, 869.696025, 594.327217, 0.000000, X, Y) && !ellipse(23916.257600, 16793.985200, 675.922419, 675.922419, 0.000000, X, Y) && !ellipse(17884.198000, 26796.848400, 1473.032042, 763.392822, 2.946000, X, Y) && !ellipse(23025.454000, 17647.336000, 1617.360047, 1617.360047, 0.000000, X, Y) && !ellipse(17619.292892, 20837.703476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17944.237946, 25376.047272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18127.707108, 28683.964203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23641.924000, 11520.328000, 2011.904058, 2011.904058, 0.000000, X, Y) && !ellipse(19819.108124, 17700.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23915.693542, 13692.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.361237, 14298.015854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17131.435200, 21528.906000, 1679.000048, 1049.808030, 0.000000, X, Y) && !ellipse(17810.449692, 23536.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.211212, 17474.133148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.662000, 10757.344000, 2081.552060, 2081.552060, 0.000000, X, Y) && !ellipse(23710.244000, 15351.682000, 1695.920049, 1695.920049, 0.000000, X, Y) && !ellipse(22178.071121, 17487.385727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23716.675201, 12736.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17999.567429, 25872.285522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17273.140793, 26667.942047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.187668, 24831.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17891.669693, 22731.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16887.544250, 25364.813843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17916.997345, 19842.416626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18225.096237, 29175.078247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17071.625397, 23785.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21003.686615, 17598.124344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19213.109634, 17817.535965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.711609, 13849.633179, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:25 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7.gif
[Tue May  8 05:40:09 2012] Mean detx,y = (-7313.01, 3272.86) 
[Tue May  8 05:40:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 05:43:52 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 05:43:52 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May  8 05:43:52 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue May  8 09:13:38 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 09:13:38 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:18 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:18 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May  8 15:47:29 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:29 2012] Using photon index=1.80, rate=0.361, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7.arf
[Tue May  8 15:47:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:29 2012] Updating source flux to 6.3e-12
[Tue May  8 15:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May  8 16:09:31 2012] xmm0412592101/analysis//spectral/fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete