[Sat May  5 10:33:11 2012] Detection parameters:
  Position = (314.2, 361.4) = 5 34 22.72 22 6 46.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 404.2 +/- 38.8
  Background counts = 531.0
  Rate = 0.04 +/- 0.004

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 4.71'
[Sat May  5 21:59:55 2012] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 8.78"
[Sat May  5 21:59:55 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 8.78"
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src53.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src53.csv
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src53_1.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src53.csv
[Sun May  6 14:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Sun May  6 14:30:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Sun May  6 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src53.csv
[Sun May  6 14:30:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Warning, spatial fit 53 centroid is now closest to src. 53
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 6131.300000, observed total counts = 6175.000000
[Sun May  6 14:31:27 2012] Offset between fit and detection position for source 69 = 4.364795 pixels
[Sun May  6 14:31:27 2012] Warning, changing simple spatial fit ID from 53 to 80
[Sun May  6 14:31:27 2012] 5918.970000 total counts/ 5480.360000 bgd. counts: snr = 5.924804
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 4.364795 pixels
  Position = (312.4, 365.4) = 5 34 23.28 22 7 7.4
  Extent = 18.3 (18.2-36.6)", rotation angle = 0
  Source counts = 438.6 +/- 76.9
  Background counts = 5480.4
  Rate = 0.03 +/- 0.005
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 53
[Mon May  7 01:40:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 18.28"
[Mon May  7 01:40:57 2012] source mask rpix=4.2, npix_max = 88, mask sum = 81, frac = 0.916
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 18.28"
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src52.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src52.csv
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src52.csv
[Mon May  7 21:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:00 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon May  7 21:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Mon May  7 21:59:00 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon May  7 21:59:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52.csv
[Mon May  7 21:59:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:18 2012] Warning, spatial fit 52 centroid is now closest to src. 47
[Mon May  7 22:00:19 2012] Spatial fit model total counts = 6145.800000, observed total counts = 6175.000000
[Mon May  7 22:00:19 2012] Offset between fit and detection position for source 69 = 0.924452 pixels
[Mon May  7 22:00:19 2012] Warning, changing simple spatial fit ID from 52 to 79
[Mon May  7 22:00:19 2012] 5941.841000 total counts/ 5565.300000 bgd. counts: snr = 5.047403
Spatial fit parameters:
  Offset between fit and detection position for source 69 = 0.924452 pixels
  Position = (312.6, 364.5) = 5 34 23.23 22 7 3.5
  Extent = 18.3 (18.2-36.6)", rotation angle = 0
  Source counts = 376.5 +/- 77.1
  Background counts = 5565.3
  Rate = 0.02 +/- 0.005
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:30 2012] XMMSAS src. selection expression = ellipse(27145.068000, 31664.856000, 1096.632032, 1096.632032, 0.000000, X, Y)
[Tue May  8 05:39:30 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src69_src.reg
[Tue May  8 05:39:30 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (250, 301) - (376, 428)
[Tue May  8 05:39:30 2012] XMMSAS bgd. selection expression = annulus(27145.068000, 31664.856000, 1827.720053, 3655.440105, X, Y) && !ellipse(22565.774000, 33577.478000, 3013.136087, 806.216023, 182.236000, X, Y) && !ellipse(25436.704071, 31539.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.698761, 32039.459259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.997345, 31570.979340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.124000, 34083.068000, 3013.136087, 3013.136087, 0.000000, X, Y) && !ellipse(24220.257263, 31567.233093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.199341, 31642.829742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.501892, 32850.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.218903, 32309.342987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.203400, 31675.520000, 1456.152042, 1456.152042, 0.000000, X, Y) && !ellipse(23951.974518, 32396.388123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.953827, 31660.066193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.220215, 31326.567963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24620.833800, 32482.600600, 718.207221, 718.207221, 0.000000, X, Y) && !ellipse(23068.522000, 32612.699800, 1506.568043, 1506.568043, 358.321000, X, Y) && !ellipse(27437.159790, 32223.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24882.734863, 33353.281921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.542000, 33005.166200, 1502.352043, 697.861620, 353.317000, X, Y) && !ellipse(23999.263245, 32864.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27820.007050, 32134.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.861694, 33875.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.896210, 31251.244781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.998000, 33044.646000, 996.600029, 996.600029, 0.000000, X, Y) && !ellipse(29396.112091, 31439.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25595.050018, 34577.457520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.614563, 35356.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.002014, 31246.866638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.390000, 33448.038000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(26812.107483, 33268.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28880.431061, 31652.087830, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:30 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src69.gif
[Tue May  8 07:34:53 2012] Mean detx,y = (2056.17, -7531.47) 
[Tue May  8 07:34:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:35:36 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:35:37 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue May  8 07:35:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue May  8 15:47:23 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:23 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue May  8 15:47:33 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:33 2012] Using photon index=1.80, rate=0.0243, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src69.arf
[Tue May  8 15:47:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:33 2012] Updating source flux to 3.8e-13
[Tue May  8 15:59:15 2012] Flag c found in src. 69 procflags, skipping spectral fitting