[Sat May  5 10:33:11 2012] Detection parameters:
  Position = (249.7, 365.3) = 5 34 42.90 22 7 6.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 357.2 +/- 37.4
  Background counts = 488.2
  Rate = 0.03 +/- 0.003

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 6.00'
[Sat May  5 21:59:55 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sat May  5 21:59:55 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.879
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 67 for pass 0, mean size = 9.43"
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src67.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src67.csv
[Sun May  6 14:30:14 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun May  6 14:30:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src67.csv
[Sun May  6 14:30:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:18 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun May  6 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun May  6 14:30:18 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun May  6 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src67.csv
[Sun May  6 14:30:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Source 66 is offset by 1.346343 and 9.047379 pixels which is larger than
2 X fitted extent = 9.078069 x 7.918299, not incorporating fit results
[Sun May  6 14:31:27 2012] Warning, spatial fit 67 centroid is now closest to src. 58
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 65
[Mon May  7 01:40:57 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Mon May  7 01:40:57 2012] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.879
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 66 for pass 1, mean size = 9.43"
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src66.ximg exists
[Mon May  7 21:58:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src66.csv
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src66_1.ximg exists
[Mon May  7 21:58:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src66.csv
[Mon May  7 21:58:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Mon May  7 21:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src66.csv
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Mon May  7 21:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src66.csv
[Mon May  7 21:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 8535.940000, observed total counts = 5478.000000
[Mon May  7 22:00:18 2012] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Spatial fit model total counts = 7340.250000, observed total counts = 5293.000000
[Mon May  7 22:00:19 2012] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:32 2012] XMMSAS src. selection expression = ellipse(21675.825867, 31730.081970, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 05:39:32 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src66_src.reg
[Tue May  8 05:39:32 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (212, 328) - (287, 403)
[Tue May  8 05:39:32 2012] XMMSAS bgd. selection expression = annulus(21675.825867, 31730.081970, 1087.500000, 2175.000000, X, Y) && !ellipse(22565.774000, 33577.478000, 3013.136087, 806.216023, 182.236000, X, Y) && !ellipse(24702.997345, 31570.979340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.124000, 34083.068000, 3013.136087, 3013.136087, 0.000000, X, Y) && !ellipse(24220.257263, 31567.233093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.199341, 31642.829742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23951.974518, 32396.388123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.953827, 31660.066193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.893097, 31613.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23068.522000, 32612.699800, 1506.568043, 1506.568043, 358.321000, X, Y) && !ellipse(23999.263245, 32864.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20251.826126, 31697.666718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.782333, 32439.078339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21086.611145, 31748.635315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.677414, 31835.337952, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:32 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src66.gif
[Tue May  8 08:01:25 2012] Mean detx,y = (-3353.99, -7251.87) 
[Tue May  8 08:01:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 08:01:55 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 08:01:55 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue May  8 08:01:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Tue May  8 13:33:54 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 13:33:54 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:24 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:24 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Tue May  8 15:47:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:34 2012] Using photon index=1.80, rate=0.0306, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src66.arf
[Tue May  8 15:47:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:34 2012] Updating source flux to 5.2e-13
[Tue May  8 15:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting