[Sat May  5 10:32:57 2012] Detection parameters:
  Position = (278.1, 102.0) = 5 34 33.99 21 48 2.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 876.8 +/- 42.3
  Background counts = 122.4
  Rate = 0.06 +/- 0.003

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 14.32'
[Sat May  5 21:59:55 2012] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 13.59"
[Sat May  5 21:59:55 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.066
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 13.59"
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src29.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src29.csv
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src29.csv
[Sun May  6 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May  6 14:30:17 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun May  6 14:31:27 2012] Warning, spatial fit 29 centroid is now closest to src. 30
[Sun May  6 14:31:27 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.595411 pixels away
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 5
[Sun May  6 14:31:28 2012] Source is confused with source 29
[Mon May  7 01:40:57 2012] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 13.59"
[Mon May  7 01:40:57 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.066
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 13.59"
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src29.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src29.csv
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src29_1.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src29.csv
[Mon May  7 21:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Mon May  7 21:58:59 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 5758.210000, observed total counts = 5645.000000
[Mon May  7 22:00:18 2012] Offset between fit and detection position for source 6 = 2.003566 pixels
[Mon May  7 22:00:18 2012] 4476.406000 total counts/ 3924.570000 bgd. counts: snr = 8.808744
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 2.003566 pixels
  Position = (279.5, 103.5) = 5 34 33.58 21 48 8.1
  Extent = 13.3 (11.2-17.6)", rotation angle = 0
  Source counts = 551.8 +/- 66.9
  Background counts = 3924.6
  Rate = 0.04 +/- 0.004
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 5482.090000, observed total counts = 3545.000000
[Mon May  7 22:00:18 2012] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:28 2012] XMMSAS src. selection expression = ellipse(24264.655800, 8958.332800, 798.156023, 798.156023, 0.000000, X, Y)
[Tue May  8 05:39:28 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src6_src.reg
[Tue May  8 05:39:28 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (234, 58) - (325, 149)
[Tue May  8 05:39:28 2012] XMMSAS bgd. selection expression = annulus(24264.655800, 8958.332800, 1330.260038, 2660.520077, X, Y) && !ellipse(24235.090912, 11261.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24203.624600, 9521.988600, 1608.976046, 1608.976046, 0.000000, X, Y) && !ellipse(24323.097168, 11770.982864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.033539, 7964.130836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23641.924000, 11520.328000, 2011.904058, 2011.904058, 0.000000, X, Y) && !ellipse(23882.128662, 10812.448921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23457.660000, 10463.602000, 812.712023, 812.712023, 0.000000, X, Y) && !ellipse(23716.762817, 9250.815117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.126740, 9784.895500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.662000, 10757.344000, 2081.552060, 2081.552060, 0.000000, X, Y) && !ellipse(23576.980835, 7830.768051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23426.005249, 8480.172287, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:28 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src6.gif
[Tue May  8 07:00:39 2012] Mean detx,y = (446.26, 15378.41) 
[Tue May  8 07:00:43 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:01:26 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:01:27 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May  8 07:01:27 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May  8 15:47:21 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:21 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May  8 15:47:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:31 2012] Using photon index=1.80, rate=0.0356, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src6.arf
[Tue May  8 15:47:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:31 2012] Updating source flux to 1.4e-12
[Tue May  8 15:59:15 2012] Flag p found in src. 6 procflags, skipping spectral fitting
[Tue May  8 15:59:15 2012] Flag c found in src. 6 procflags, skipping spectral fitting