[Sat May  5 10:33:07 2012] Detection parameters:
  Position = (300.7, 380.1) = 5 34 26.93 22 8 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 297.6 +/- 35.6
  Background counts = 441.4
  Rate = 0.03 +/- 0.003

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 5.92'
[Sat May  5 21:59:55 2012] Using EEF radius (= 9.39 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 9.39"
[Sat May  5 21:59:55 2012] source mask rpix=2.2, npix_max = 28, mask sum = 30, frac = 1.061
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 72 for pass 0, mean size = 9.39"
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src72.ximg exists
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src72_1.ximg exists
[Sun May  6 14:30:15 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src72 appears to have run properly
[Sun May  6 14:30:18 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src72.ximg exists
[Sun May  6 14:30:18 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src72_1.ximg exists
[Sun May  6 14:30:18 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src72 appears to have run properly
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 6279.960000, observed total counts = 6401.000000
[Sun May  6 14:31:27 2012] Offset between fit and detection position for source 48 = 3.195547 pixels
[Sun May  6 14:31:27 2012] 5895.270000 total counts/ 5394.390000 bgd. counts: snr = 6.819657
Spatial fit parameters:
  Offset between fit and detection position for source 48 = 3.195547 pixels
  Position = (297.5, 379.9) = 5 34 27.93 22 8 10.5
  Extent = 18.8 (14.9-37.6)" x 8.7 (6.6-11.8)", rotation angle = 353 (340-0) degrees
  Source counts = 500.9 +/- 76.8
  Background counts = 5394.4
  Rate = 0.03 +/- 0.005
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Sun May  6 14:31:28 2012] Source is confused with source 50
[Mon May  7 01:40:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 13.75"
[Mon May  7 01:40:57 2012] source mask rpix=3.2, npix_max = 53, mask sum = 50, frac = 0.933
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 71 for pass 1, mean size = 13.75"
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src71.ximg exists
[Mon May  7 21:58:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src71.csv
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src71_1.ximg exists
[Mon May  7 21:58:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src71.csv
[Mon May  7 21:58:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Mon May  7 21:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Mon May  7 21:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src71.csv
[Mon May  7 21:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:17 2012] Spatial fit model total counts = 9746.680000, observed total counts = 8656.000000
[Mon May  7 22:00:17 2012] Poor agreement between spatial fit and data for source 48
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Warning, spatial fit 71 centroid is now closest to src. 45
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.27
[Tue May  8 05:39:33 2012] XMMSAS src. selection expression = ellipse(25836.542000, 33005.166200, 1126.764032, 523.396215, 353.317000, X, Y)
[Tue May  8 05:39:33 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src48_src.reg
[Tue May  8 05:39:33 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (233, 315) - (362, 445)
[Tue May  8 05:39:33 2012] XMMSAS bgd. selection expression = annulus(25836.542000, 33005.166200, 1877.940054, 3755.880108, X, Y) && !ellipse(22565.774000, 33577.478000, 3013.136087, 806.216023, 182.236000, X, Y) && !ellipse(25436.704071, 31539.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.698761, 32039.459259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.997345, 31570.979340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.124000, 34083.068000, 3013.136087, 3013.136087, 0.000000, X, Y) && !ellipse(24220.257263, 31567.233093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.199341, 31642.829742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.501892, 32850.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.218903, 32309.342987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.203400, 31675.520000, 1456.152042, 1456.152042, 0.000000, X, Y) && !ellipse(23951.974518, 32396.388123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.953827, 31660.066193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.220215, 31326.567963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.893097, 31613.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.068000, 31664.856000, 1462.176042, 1462.176042, 0.000000, X, Y) && !ellipse(24620.833800, 32482.600600, 718.207221, 718.207221, 0.000000, X, Y) && !ellipse(23068.522000, 32612.699800, 1506.568043, 1506.568043, 358.321000, X, Y) && !ellipse(27437.159790, 32223.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21675.825867, 31730.081970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24882.734863, 33353.281921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23999.263245, 32864.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27820.007050, 32134.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.861694, 33875.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.896210, 31251.244781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.998000, 33044.646000, 996.600029, 996.600029, 0.000000, X, Y) && !ellipse(29396.112091, 31439.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25595.050018, 34577.457520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.782333, 32439.078339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.614563, 35356.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.002014, 31246.866638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.390000, 33448.038000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(26812.107483, 33268.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28880.431061, 31652.087830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.000000, 37259.671661, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:33 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src48.gif
[Tue May  8 08:08:24 2012] Mean detx,y = (749.64, -8703.38) 
[Tue May  8 08:08:28 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 08:08:53 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 08:08:53 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue May  8 08:08:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src48_bgd.pi.gz
[Tue May  8 15:47:24 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:24 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src48_src_b10.pi.gz
[Tue May  8 15:47:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:34 2012] Using photon index=1.80, rate=0.0323, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src48.arf
[Tue May  8 15:47:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:35 2012] Updating source flux to 5.6e-13
[Tue May  8 15:59:15 2012] Flag p found in src. 48 procflags, skipping spectral fitting
[Tue May  8 15:59:15 2012] Flag c found in src. 48 procflags, skipping spectral fitting