[Sat May  5 10:33:07 2012] Detection parameters:
  Position = (286.6, 383.9) = 5 34 31.37 22 8 17.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 243.2 +/- 29.8
  Background counts = 418.5
  Rate = 0.03 +/- 0.003

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 6.26'
[Sat May  5 21:59:55 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Sat May  5 21:59:55 2012] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.722
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 71 for pass 0, mean size = 9.56"
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src71.ximg exists
[Sun May  6 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src71.csv
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src71_1.ximg exists
[Sun May  6 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src71.csv
[Sun May  6 14:30:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:18 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src71.ximg exists
[Sun May  6 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sun May  6 14:30:18 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg exists
[Sun May  6 14:30:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src71.csv
[Sun May  6 14:30:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Warning, spatial fit 71 centroid is now closest to src. 50
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 48
[Mon May  7 01:40:57 2012] Using EEF radius (= 9.56 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 9.56"
[Mon May  7 01:40:57 2012] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.722
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 70 for pass 1, mean size = 9.56"
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src70.ximg exists
[Mon May  7 21:58:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src70.csv
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon May  7 21:58:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src70.csv
[Mon May  7 21:58:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon May  7 21:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon May  7 21:59:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon May  7 21:59:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:17 2012] Source 46 is offset by 0.703619 and 7.790827 pixels which is larger than
2 X fitted extent = 1.107789 x 1.107789, not incorporating fit results
[Mon May  7 22:00:19 2012] Spatial fit model total counts = 5674.640000, observed total counts = 5088.000000
[Mon May  7 22:00:19 2012] Poor agreement between spatial fit and data for source 46
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:32 2012] XMMSAS src. selection expression = ellipse(24882.734863, 33353.281921, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 05:39:32 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src46_src.reg
[Tue May  8 05:39:32 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (249, 346) - (324, 421)
[Tue May  8 05:39:33 2012] XMMSAS bgd. selection expression = annulus(24882.734863, 33353.281921, 1087.500000, 2175.000000, X, Y) && !ellipse(22565.774000, 33577.478000, 3013.136087, 806.216023, 182.236000, X, Y) && !ellipse(25436.704071, 31539.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.698761, 32039.459259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.997345, 31570.979340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.124000, 34083.068000, 3013.136087, 3013.136087, 0.000000, X, Y) && !ellipse(24220.257263, 31567.233093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.199341, 31642.829742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.501892, 32850.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.218903, 32309.342987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.203400, 31675.520000, 1456.152042, 1456.152042, 0.000000, X, Y) && !ellipse(23951.974518, 32396.388123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.953827, 31660.066193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.893097, 31613.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.068000, 31664.856000, 1462.176042, 1462.176042, 0.000000, X, Y) && !ellipse(24620.833800, 32482.600600, 718.207221, 718.207221, 0.000000, X, Y) && !ellipse(23068.522000, 32612.699800, 1506.568043, 1506.568043, 358.321000, X, Y) && !ellipse(27437.159790, 32223.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.542000, 33005.166200, 1502.352043, 697.861620, 353.317000, X, Y) && !ellipse(23999.263245, 32864.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27820.007050, 32134.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.861694, 33875.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.998000, 33044.646000, 996.600029, 996.600029, 0.000000, X, Y) && !ellipse(25595.050018, 34577.457520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.614563, 35356.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.390000, 33448.038000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(26812.107483, 33268.435150, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:33 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src46.gif
[Tue May  8 08:07:35 2012] Mean detx,y = (-253.91, -8993.25) 
[Tue May  8 08:07:39 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 08:08:05 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 08:08:06 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue May  8 08:08:06 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Tue May  8 13:46:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 13:46:55 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:24 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:24 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Tue May  8 15:47:34 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:34 2012] Using photon index=1.80, rate=0.0281, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src46.arf
[Tue May  8 15:47:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:34 2012] Updating source flux to 2e-12
[Tue May  8 15:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting