[Sat May  5 10:33:01 2012] Detection parameters:
  Position = (281.0, 166.0) = 5 34 33.09 21 52 39.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 844.9 +/- 42.5
  Background counts = 282.9
  Rate = 0.05 +/- 0.003

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 9.69'
[Sat May  5 21:59:55 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Sat May  5 21:59:55 2012] source mask rpix=2.6, npix_max = 38, mask sum = 31, frac = 0.811
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.27"
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src30.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src30.csv
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src30.csv
[Sun May  6 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun May  6 14:30:17 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun May  6 14:30:17 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun May  6 14:31:27 2012] Warning, spatial fit 30 centroid is now closest to src. 133
[Sun May  6 14:31:27 2012] Source 21 is offset by -4.300534 and 5.334876 pixels which is larger than
2 X fitted extent = 1.305862 x 1.305862, not incorporating fit results
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 135
[Sun May  6 14:31:28 2012] Source is confused with source 136
[Sun May  6 14:31:28 2012] Source is confused with source 133
[Mon May  7 01:40:57 2012] Using EEF radius (= 11.27 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 11.27"
[Mon May  7 01:40:57 2012] source mask rpix=2.6, npix_max = 38, mask sum = 31, frac = 0.811
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 11.27"
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src30.ximg exists
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src30_1.ximg exists
[Mon May  7 21:58:55 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src30 appears to have run properly
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Mon May  7 21:58:59 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src30 appears to have run properly
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 6458.910000, observed total counts = 6462.000000
[Mon May  7 22:00:18 2012] Offset between fit and detection position for source 21 = 2.053935 pixels
[Mon May  7 22:00:18 2012] Warning, changing simple spatial fit ID from 30 to 13
[Mon May  7 22:00:18 2012] 6277.277000 total counts/ 5974.420000 bgd. counts: snr = 3.918228
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.053935 pixels
  Position = (283.1, 166.3) = 5 34 32.45 21 52 41.2
  Extent = 10.5" x 7.0", rotation angle = -0
  Source counts = 302.9 +/- 79.2
  Background counts = 5974.4
  Rate = 0.02 +/- 0.005
[Mon May  7 22:00:18 2012] Spatial fit model total counts = 6124.990000, observed total counts = 6185.000000
[Mon May  7 22:00:18 2012] Offset between fit and detection position for source 21 = 0.389593 pixels
[Mon May  7 22:00:18 2012] Warning, changing simple spatial fit ID from 13 to 30
[Mon May  7 22:00:18 2012] 5858.984000 total counts/ 5464.800000 bgd. counts: snr = 5.332267
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.389593 pixels
  Position = (283.4, 166.1) = 5 34 32.35 21 52 40.4
  Extent = 10.9 (7.9-14.8)" x 7.4 (6.1-9.2)", rotation angle = 0 (360-0) degrees
  Source counts = 394.2 +/- 76.5
  Background counts = 5464.8
  Rate = 0.03 +/- 0.005
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.86
[Tue May  8 05:39:28 2012] XMMSAS src. selection expression = ellipse(24608.028000, 14403.286200, 652.272019, 445.745413, 0.000000, X, Y)
[Tue May  8 05:39:28 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src21_src.reg
[Tue May  8 05:39:28 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (246, 129) - (321, 204)
[Tue May  8 05:39:28 2012] XMMSAS bgd. selection expression = annulus(24608.028000, 14403.286200, 1087.120031, 2174.240063, X, Y) && !ellipse(24063.783112, 17358.973907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.788000, 15694.276200, 1737.040050, 334.660010, 91.136000, X, Y) && !ellipse(24794.387200, 16976.272000, 954.464027, 954.464027, 0.000000, X, Y) && !ellipse(23458.455017, 17432.333694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.602000, 15424.048000, 971.440028, 971.440028, 0.000000, X, Y) && !ellipse(24621.023315, 14934.264420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.036652, 16093.328079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.327393, 13437.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.155945, 12735.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23916.257600, 16793.985200, 675.922419, 675.922419, 0.000000, X, Y) && !ellipse(24323.097168, 11770.982864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23025.454000, 17647.336000, 1617.360047, 1617.360047, 0.000000, X, Y) && !ellipse(23641.924000, 11520.328000, 2011.904058, 2011.904058, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23915.693542, 13692.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.361237, 14298.015854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.662000, 10757.344000, 2081.552060, 2081.552060, 0.000000, X, Y) && !ellipse(23710.244000, 15351.682000, 1695.920049, 1695.920049, 0.000000, X, Y) && !ellipse(23716.675201, 12736.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.711609, 13849.633179, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:28 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src21.gif
[Tue May  8 07:01:51 2012] Mean detx,y = (512.21, 9946.98) 
[Tue May  8 07:01:54 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 07:02:23 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 07:02:24 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May  8 07:02:24 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Tue May  8 15:47:21 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:21 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Tue May  8 15:47:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:31 2012] Using photon index=1.80, rate=0.0254, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src21.arf
[Tue May  8 15:47:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:31 2012] Updating source flux to 7.2e-13
[Tue May  8 15:59:15 2012] Flag b found in src. 21 procflags, skipping spectral fitting
[Tue May  8 15:59:15 2012] Flag c found in src. 21 procflags, skipping spectral fitting