[Sat May 5 10:33:00 2012] Detection parameters: Position = (285.4, 192.6) = 5 34 31.73 21 54 43.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 762.7 +/- 42.0 Background counts = 408.6 Rate = 0.08 +/- 0.005 [Sat May 5 10:33:27 2012] Off-axis axis estimate = 7.73' [Sat May 5 21:59:55 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting [Sat May 5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 10.29" [Sat May 5 21:59:55 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.761 [Sat May 5 21:59:55 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.29" [Sun May 6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src9.ximg exists [Sun May 6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src9.csv [Sun May 6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src9_1.ximg exists [Sun May 6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src9.csv [Sun May 6 14:30:13 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists [Sun May 6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists [Sun May 6 14:30:16 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly [Sun May 6 14:31:27 2012] Warning, spatial fit 9 centroid is now closest to src. 17 [Sun May 6 14:31:28 2012] Vigneting correction estimate = 1.000000 [Sun May 6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 14:31:28 2012] Assessing source extent using major [Sun May 6 14:31:28 2012] Source does appear to be extended [Sun May 6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 14:31:28 2012] Source is confused with source 20 [Mon May 7 01:40:57 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting [Mon May 7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 10.29" [Mon May 7 01:40:57 2012] source mask rpix=2.4, npix_max = 32, mask sum = 25, frac = 0.761 [Mon May 7 01:40:57 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.29" [Mon May 7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src9.ximg exists [Mon May 7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src9.csv [Mon May 7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src9_1.ximg exists [Mon May 7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src9.csv [Mon May 7 21:58:54 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src9_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 7 21:58:58 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9.ximg exists [Mon May 7 21:58:58 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists [Mon May 7 21:58:58 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly [Mon May 7 22:00:17 2012] Source 19 is offset by -6.783596 and -1.202030 pixels which is larger than 2 X fitted extent = 1.145651 x 1.145651, not incorporating fit results [Mon May 7 22:00:17 2012] Spatial fit model total counts = 8302.170000, observed total counts = 7589.000000 [Mon May 7 22:00:17 2012] Offset between fit and detection position for source 19 = 3.058944 pixels [Mon May 7 22:00:17 2012] 7950.460000 total counts/ 7178.500000 bgd. counts: snr = 9.111250 Spatial fit parameters: Offset between fit and detection position for source 19 = 3.058944 pixels Position = (285.6, 195.7) = 5 34 31.68 21 54 49.0 Extent = 11.9 (8.7-14.8)", rotation angle = 0 Source counts = 772.0 +/- 89.2 Background counts = 7178.5 Rate = 0.05 +/- 0.006 [Mon May 7 22:00:19 2012] Vigneting correction estimate = 1.000000 [Mon May 7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 7 22:00:19 2012] Assessing source extent using major axis lower bound [Mon May 7 22:00:19 2012] Source does appear to be extended [Mon May 7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 8 05:39:26 2012] XMMSAS src. selection expression = ellipse(24794.387200, 16976.272000, 715.848021, 715.848021, 0.000000, X, Y) [Tue May 8 05:39:26 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src19_src.reg [Tue May 8 05:39:26 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (244, 155) - (327, 237) [Tue May 8 05:39:26 2012] XMMSAS bgd. selection expression = annulus(24794.387200, 16976.272000, 1193.080034, 2386.160069, X, Y) && !ellipse(24604.147949, 17524.710129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24063.783112, 17358.973907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.788000, 15694.276200, 1737.040050, 334.660010, 91.136000, X, Y) && !ellipse(23458.455017, 17432.333694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24657.602000, 15424.048000, 971.440028, 971.440028, 0.000000, X, Y) && !ellipse(24621.023315, 14934.264420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.036652, 16093.328079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.040253, 17530.745010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24608.028000, 14403.286200, 869.696025, 594.327217, 0.000000, X, Y) && !ellipse(23916.257600, 16793.985200, 675.922419, 675.922419, 0.000000, X, Y) && !ellipse(23025.454000, 17647.336000, 1617.360047, 1617.360047, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23937.361237, 14298.015854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.211212, 17474.133148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.244000, 15351.682000, 1695.920049, 1695.920049, 0.000000, X, Y) && !ellipse(22178.071121, 17487.385727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.711609, 13849.633179, 870.000000, 870.000000, 0.000000, X, Y) [Tue May 8 05:39:26 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src19.gif [Tue May 8 06:12:32 2012] Mean detx,y = (549.58, 7320.72) [Tue May 8 06:12:36 2012] Setting backscal keywords in source and bgd. spectrum [Tue May 8 06:13:16 2012] Binned source spectrum to 10 counts/bin [Tue May 8 06:13:16 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Tue May 8 06:13:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src19_bgd.pi.gz [Tue May 8 15:47:19 2012] Updating aperture counts using extracted products [Tue May 8 15:47:19 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src19_src_b10.pi.gz [Tue May 8 15:47:30 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 8 15:47:30 2012] Using photon index=1.80, rate=0.0498, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src19.arf [Tue May 8 15:47:30 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 8 15:47:30 2012] Updating source flux to 1.1e-12 [Tue May 8 15:59:15 2012] Flag b found in src. 19 procflags, skipping spectral fitting [Tue May 8 15:59:15 2012] Flag c found in src. 19 procflags, skipping spectral fitting