[Sat May  5 10:33:27 2012] Detection parameters:
  Position = (272.9, 130.2) = 5 34 35.63 21 49 58.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 411.5 +/- 33.8
  Background counts = 151.4
  Rate = 0.03 +/- 0.002

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 12.34'
[Sat May  5 21:59:55 2012] Using EEF radius (= 12.60 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 12.60"
[Sat May  5 21:59:55 2012] source mask rpix=2.9, npix_max = 46, mask sum = 41, frac = 0.889
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 79 for pass 0, mean size = 12.60"
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src79.ximg exists
[Sun May  6 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src79.csv
[Sun May  6 14:30:15 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src79_1.ximg exists
[Sun May  6 14:30:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src79.csv
[Sun May  6 14:30:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:19 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Sun May  6 14:30:19 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Sun May  6 14:30:19 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src79 appears to have run properly
[Sun May  6 14:31:27 2012] Source 141 is offset by 5.862963 and -0.776568 pixels which is larger than
2 X fitted extent = 1.495044 x 1.495044, not incorporating fit results
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 4782.050000, observed total counts = 4682.000000
[Sun May  6 14:31:27 2012] Offset between fit and detection position for source 141 = 9.572208 pixels
[Sun May  6 14:31:27 2012] Warning, changing simple spatial fit ID from 79 to 73
[Sun May  6 14:31:27 2012] 4538.590000 total counts/ 3612.410000 bgd. counts: snr = 15.409796
Spatial fit parameters:
  Offset between fit and detection position for source 141 = 9.572208 pixels
  Position = (265.4, 124.2) = 5 34 37.96 21 49 38.1
  Extent = 26.0 (25.9-26.1)", rotation angle = 0
  Source counts = 926.2 +/- 67.4
  Background counts = 3612.4
  Rate = 0.06 +/- 0.004
[Sun May  6 14:31:27 2012] Source 141 is offset by 5.278759 and 4.353494 pixels which is larger than
2 X fitted extent = 1.543949 x 1.543949, not incorporating fit results
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 4
[Mon May  7 01:40:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 26.02"
[Mon May  7 01:40:57 2012] source mask rpix=6.0, npix_max = 168, mask sum = 169, frac = 1.006
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 78 for pass 1, mean size = 26.02"
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src78.ximg exists
[Mon May  7 21:58:56 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src78_1.ximg exists
[Mon May  7 21:58:56 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src78 appears to have run properly
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Mon May  7 21:59:01 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Mon May  7 21:59:01 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src78 appears to have run properly
[Mon May  7 22:00:18 2012] Source 141 is offset by -1.612506 and -6.755241 pixels which is larger than
2 X fitted extent = 1.495044 x 1.495044, not incorporating fit results
[Mon May  7 22:00:19 2012] Warning, spatial fit 78 centroid is now closest to src. 28
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:33 2012] XMMSAS src. selection expression = ellipse(23043.662000, 10757.344000, 1561.164045, 1561.164045, 0.000000, X, Y)
[Tue May  8 05:39:33 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src141_src.reg
[Tue May  8 05:39:33 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (176, 34) - (355, 214)
[Tue May  8 05:39:33 2012] XMMSAS bgd. selection expression = annulus(23043.662000, 10757.344000, 2601.940075, 5203.880150, X, Y) && !ellipse(24464.788000, 15694.276200, 1737.040050, 334.660010, 91.136000, X, Y) && !ellipse(24657.602000, 15424.048000, 971.440028, 971.440028, 0.000000, X, Y) && !ellipse(24621.023315, 14934.264420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.036652, 16093.328079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.327393, 13437.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24235.090912, 11261.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.155945, 12735.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24203.624600, 9521.988600, 1608.976046, 1608.976046, 0.000000, X, Y) && !ellipse(24264.655800, 8958.332800, 1064.208031, 1064.208031, 0.000000, X, Y) && !ellipse(24608.028000, 14403.286200, 869.696025, 594.327217, 0.000000, X, Y) && !ellipse(24323.097168, 11770.982864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.033539, 7964.130836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23641.924000, 11520.328000, 2011.904058, 2011.904058, 0.000000, X, Y) && !ellipse(23882.128662, 10812.448921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23915.693542, 13692.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.361237, 14298.015854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23457.660000, 10463.602000, 812.712023, 812.712023, 0.000000, X, Y) && !ellipse(23716.762817, 9250.815117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.126740, 9784.895500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.244000, 15351.682000, 1695.920049, 1695.920049, 0.000000, X, Y) && !ellipse(23716.675201, 12736.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23576.980835, 7830.768051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23426.005249, 8480.172287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.711609, 13849.633179, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:33 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src141.gif
[Tue May  8 08:15:16 2012] Mean detx,y = (-442.28, 13608.30) 
[Tue May  8 08:15:19 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 08:16:56 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 08:16:57 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src141_src_b10.pi.gz
[Tue May  8 08:16:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src141_bgd.pi.gz
[Tue May  8 15:47:25 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:25 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src141_src_b10.pi.gz
[Tue May  8 15:47:35 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:35 2012] Using photon index=1.80, rate=0.0597, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src141.arf
[Tue May  8 15:47:35 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:35 2012] Updating source flux to 1.6e-12
[Tue May  8 15:59:15 2012] Flag b found in src. 141 procflags, skipping spectral fitting
[Tue May  8 15:59:15 2012] Flag c found in src. 141 procflags, skipping spectral fitting