[Sat May  5 10:33:25 2012] Detection parameters:
  Position = (282.1, 178.9) = 5 34 32.75 21 53 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 721.4 +/- 43.7
  Background counts = 380.9
  Rate = 0.08 +/- 0.005

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 8.75'
[Sat May  5 21:59:55 2012] Using EEF radius (= 10.80 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 10.80"
[Sat May  5 21:59:55 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.011
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 10.80"
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src12.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src12.csv
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src12_1.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src12.csv
[Sun May  6 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sun May  6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sun May  6 14:30:16 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sun May  6 14:31:27 2012] Warning, spatial fit 12 centroid is now closest to src. 133
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 6435.370000, observed total counts = 6462.000000
[Sun May  6 14:31:27 2012] Offset between fit and detection position for source 134 = 2.928170 pixels
[Sun May  6 14:31:27 2012] Warning, changing simple spatial fit ID from 12 to 13
[Sun May  6 14:31:27 2012] 5968.555000 total counts/ 5023.500000 bgd. counts: snr = 13.333798
Spatial fit parameters:
  Offset between fit and detection position for source 134 = 2.928170 pixels
  Position = (284.5, 177.3) = 5 34 31.99 21 53 29.0
  Extent = 14.6 (11.2-18.8)", rotation angle = 0
  Source counts = 945.1 +/- 77.3
  Background counts = 5023.5
  Rate = 0.06 +/- 0.005
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 20
[Mon May  7 01:40:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 14.61"
[Mon May  7 01:40:57 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.940
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 14.61"
[Mon May  7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src12.ximg exists
[Mon May  7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src12.csv
[Mon May  7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon May  7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src12.csv
[Mon May  7 21:58:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:58:58 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon May  7 21:58:58 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon May  7 21:58:58 2012] Fit fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon May  7 22:00:17 2012] Spatial fit model total counts = 8469.710000, observed total counts = 8636.000000
[Mon May  7 22:00:17 2012] Offset between fit and detection position for source 134 = 0.792387 pixels
[Mon May  7 22:00:17 2012] Warning, changing simple spatial fit ID from 12 to 5
[Mon May  7 22:00:17 2012] 7096.996000 total counts/ 6371.900000 bgd. counts: snr = 9.083663
Spatial fit parameters:
  Offset between fit and detection position for source 134 = 0.792387 pixels
  Position = (284.0, 177.8) = 5 34 32.17 21 53 31.4
  Extent = 12.1 (9.4-17.0)", rotation angle = 0
  Source counts = 725.1 +/- 84.2
  Background counts = 6371.9
  Rate = 0.05 +/- 0.005
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:26 2012] XMMSAS src. selection expression = ellipse(24657.602000, 15424.048000, 728.580021, 728.580021, 0.000000, X, Y)
[Tue May  8 05:39:26 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src134_src.reg
[Tue May  8 05:39:26 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (242, 136) - (326, 220)
[Tue May  8 05:39:26 2012] XMMSAS bgd. selection expression = annulus(24657.602000, 15424.048000, 1214.300035, 2428.600070, X, Y) && !ellipse(24604.147949, 17524.710129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24063.783112, 17358.973907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.788000, 15694.276200, 1737.040050, 334.660010, 91.136000, X, Y) && !ellipse(24794.387200, 16976.272000, 954.464027, 954.464027, 0.000000, X, Y) && !ellipse(23458.455017, 17432.333694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24621.023315, 14934.264420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.036652, 16093.328079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.327393, 13437.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.040253, 17530.745010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.155945, 12735.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24608.028000, 14403.286200, 869.696025, 594.327217, 0.000000, X, Y) && !ellipse(23916.257600, 16793.985200, 675.922419, 675.922419, 0.000000, X, Y) && !ellipse(23025.454000, 17647.336000, 1617.360047, 1617.360047, 0.000000, X, Y) && !ellipse(23641.924000, 11520.328000, 2011.904058, 2011.904058, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23915.693542, 13692.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.361237, 14298.015854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.211212, 17474.133148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.244000, 15351.682000, 1695.920049, 1695.920049, 0.000000, X, Y) && !ellipse(22178.071121, 17487.385727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23716.675201, 12736.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.711609, 13849.633179, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:26 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src134.gif
[Tue May  8 06:17:14 2012] Mean detx,y = (507.13, 8887.27) 
[Tue May  8 06:17:17 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 06:17:42 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 06:17:43 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src134_src_b10.pi.gz
[Tue May  8 06:17:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src134_bgd.pi.gz
[Tue May  8 15:47:19 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:19 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src134_src_b10.pi.gz
[Tue May  8 15:47:30 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:30 2012] Using photon index=1.80, rate=0.0467, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src134.arf
[Tue May  8 15:47:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:30 2012] Updating source flux to 1e-12
[Tue May  8 15:59:15 2012] Flag c found in src. 134 procflags, skipping spectral fitting