[Sat May  5 10:33:20 2012] Detection parameters:
  Position = (364.6, 262.8) = 5 34 6.95 21 59 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 522.6 +/- 40.6
  Background counts = 359.3
  Rate = 0.06 +/- 0.005

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 5.45'
[Sat May  5 21:59:55 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Sat May  5 21:59:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.590
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.15"
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src21.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src21.csv
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src21.csv
[Sun May  6 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May  6 14:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun May  6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May  6 14:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21.csv
[Sun May  6 14:30:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Warning, spatial fit 21 centroid is now closest to src. 109
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 109
[Mon May  7 01:40:57 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Mon May  7 01:40:57 2012] source mask rpix=2.1, npix_max = 27, mask sum = 16, frac = 0.590
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 9.15"
[Mon May  7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src21.ximg exists
[Mon May  7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src21.csv
[Mon May  7 21:58:54 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon May  7 21:58:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src21.csv
[Mon May  7 21:58:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:58:58 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon May  7 21:58:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon May  7 21:58:58 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon May  7 21:58:58 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21.csv
[Mon May  7 21:58:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:18 2012] Warning, spatial fit 21 centroid is now closest to src. 109
[Mon May  7 22:00:19 2012] Spatial fit model total counts = 14361.200000, observed total counts = 16626.000000
[Mon May  7 22:00:19 2012] Poor agreement between spatial fit and data for source 106
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:27 2012] XMMSAS src. selection expression = ellipse(31674.559998, 22811.230560, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May  8 05:39:27 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src106_src.reg
[Tue May  8 05:39:27 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (327, 225) - (402, 300)
[Tue May  8 05:39:27 2012] XMMSAS bgd. selection expression = annulus(31674.559998, 22811.230560, 1087.500000, 2175.000000, X, Y) && !ellipse(31721.015045, 25783.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31482.465973, 22400.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32027.796000, 23327.506000, 1492.968043, 1492.968043, 0.000000, X, Y) && !ellipse(31723.178894, 24139.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.272000, 25155.490000, 1449.136042, 533.507215, 354.245000, X, Y) && !ellipse(31439.616455, 21434.519547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31580.911804, 23612.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33371.394531, 25178.353790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32439.609344, 20397.868668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32221.365936, 25734.534637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32782.631600, 23414.816000, 1533.368044, 757.201622, -0.000000, X, Y) && !ellipse(32362.698456, 21102.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.394897, 24138.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32705.258301, 22133.713547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32243.676000, 22387.044200, 1546.696045, 1546.696045, 0.000000, X, Y) && !ellipse(31315.023895, 20311.873596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33083.541565, 21705.063049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33246.833832, 19948.036346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.199921, 25732.094666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.507935, 24314.072723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33165.552000, 23602.960200, 2290.568066, 2290.568066, 0.000000, X, Y)
[Tue May  8 05:39:27 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src106.gif
[Tue May  8 06:31:30 2012] Mean detx,y = (7186.70, 1164.27) 
[Tue May  8 06:31:34 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 06:32:12 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 06:32:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Tue May  8 06:32:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Tue May  8 10:15:26 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 10:15:26 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:20 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:20 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Tue May  8 15:47:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:31 2012] Using photon index=1.80, rate=0.0639, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src106.arf
[Tue May  8 15:47:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:31 2012] Updating source flux to 1.4e-12
[Tue May  8 15:59:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting