[Sat May  5 10:33:19 2012] Detection parameters:
  Position = (366.0, 267.0) = 5 34 6.51 21 59 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 570.8 +/- 41.3
  Background counts = 470.0
  Rate = 0.06 +/- 0.004

[Sat May  5 10:33:27 2012] Off-axis axis estimate = 5.40'
[Sat May  5 21:59:55 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Sat May  5 21:59:55 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Sat May  5 21:59:55 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.110
[Sat May  5 21:59:55 2012] Giving source the simple spatial ID 26 for pass 0, mean size = 9.13"
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src26.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src26.csv
[Sun May  6 14:30:13 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src26_1.ximg exists
[Sun May  6 14:30:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src26.csv
[Sun May  6 14:30:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src26.ximg exists
[Sun May  6 14:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May  6 14:30:16 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg exists
[Sun May  6 14:30:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src26.csv
[Sun May  6 14:30:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  6 14:31:27 2012] Warning, spatial fit 26 centroid is now closest to src. 102
[Sun May  6 14:31:27 2012] Spatial fit model total counts = 6786.980000, observed total counts = 6830.000000
[Sun May  6 14:31:27 2012] Offset between fit and detection position for source 105 = 3.156061 pixels
[Sun May  6 14:31:27 2012] Warning, changing simple spatial fit ID from 26 to 60
[Sun May  6 14:31:27 2012] 6521.960000 total counts/ 4915.330000 bgd. counts: snr = 22.916038
Spatial fit parameters:
  Offset between fit and detection position for source 105 = 3.156061 pixels
  Position = (368.7, 268.7) = 5 34 5.68 22 0 6.5
  Extent = 18.7 (18.6-37.3)", rotation angle = 0
  Source counts = 1606.6 +/- 80.8
  Background counts = 4915.3
  Rate = 0.1 +/- 0.005
[Sun May  6 14:31:28 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:31:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:31:28 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:31:28 2012] Source does appear to be extended
[Sun May  6 14:31:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:31:28 2012] Source is confused with source 109
[Mon May  7 01:40:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May  7 01:40:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon May  7 01:40:57 2012] Initial guess for spatial extent in simple fitting = 18.66"
[Mon May  7 01:40:57 2012] source mask rpix=4.3, npix_max = 91, mask sum = 72, frac = 0.784
[Mon May  7 01:40:57 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 18.66"
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src26.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src26.csv
[Mon May  7 21:58:55 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon May  7 21:58:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src26.csv
[Mon May  7 21:58:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon May  7 21:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon May  7 21:58:59 2012] fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon May  7 21:58:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon May  7 21:58:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 22:00:18 2012] Warning, spatial fit 26 centroid is now closest to src. 101
[Mon May  7 22:00:19 2012] Vigneting correction estimate = 1.000000
[Mon May  7 22:00:19 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 22:00:19 2012] Assessing source extent using major axis lower bound
[Mon May  7 22:00:19 2012] Source does appear to be extended
[Mon May  7 22:00:19 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 05:39:27 2012] Counts = 1606.630000, rescaling region sizes by 2.000000
[Tue May  8 05:39:27 2012] XMMSAS src. selection expression = ellipse(32027.796000, 23327.506000, 2239.452064, 2239.452064, 0.000000, X, Y)
[Tue May  8 05:39:27 2012] Writing source region out to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src105_src.reg
[Tue May  8 05:39:27 2012] Extracting stamp from image fullrun_mos2_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (240, 140) - (497, 397)
[Tue May  8 05:39:28 2012] XMMSAS bgd. selection expression = annulus(32027.796000, 23327.506000, 7464.840215, 14929.680430, X, Y) && !ellipse(17506.342636, 21425.378281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.147949, 17524.710129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22565.774000, 33577.478000, 3013.136087, 806.216023, 182.236000, X, Y) && !ellipse(24063.783112, 17358.973907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24464.788000, 15694.276200, 1737.040050, 334.660010, 91.136000, X, Y) && !ellipse(25436.704071, 31539.087128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25349.698761, 32039.459259, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24702.997345, 31570.979340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24794.387200, 16976.272000, 954.464027, 954.464027, 0.000000, X, Y) && !ellipse(23458.455017, 17432.333694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.124000, 34083.068000, 3013.136087, 3013.136087, 0.000000, X, Y) && !ellipse(24657.602000, 15424.048000, 971.440028, 971.440028, 0.000000, X, Y) && !ellipse(24621.023315, 14934.264420, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31721.015045, 25783.395142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31482.465973, 22400.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23984.036652, 16093.328079, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24412.327393, 13437.798309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24220.257263, 31567.233093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24235.090912, 11261.515930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.559998, 22811.230560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.199341, 31642.829742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21636.040253, 17530.745010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24242.155945, 12735.229767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25531.501892, 32850.905243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24203.624600, 9521.988600, 1608.976046, 1608.976046, 0.000000, X, Y) && !ellipse(24264.655800, 8958.332800, 1064.208031, 1064.208031, 0.000000, X, Y) && !ellipse(24608.028000, 14403.286200, 869.696025, 594.327217, 0.000000, X, Y) && !ellipse(23916.257600, 16793.985200, 675.922419, 675.922419, 0.000000, X, Y) && !ellipse(31723.178894, 24139.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31829.272000, 25155.490000, 1449.136042, 533.507215, 354.245000, X, Y) && !ellipse(24323.097168, 11770.982864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31439.616455, 21434.519547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26419.218903, 32309.342987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31580.911804, 23612.720184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26461.203400, 31675.520000, 1456.152042, 1456.152042, 0.000000, X, Y) && !ellipse(23951.974518, 32396.388123, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22829.953827, 31660.066193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28427.220215, 31326.567963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17884.198000, 26796.848400, 1473.032042, 763.392822, 2.946000, X, Y) && !ellipse(23025.454000, 17647.336000, 1617.360047, 1617.360047, 0.000000, X, Y) && !ellipse(17619.292892, 20837.703476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33371.394531, 25178.353790, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24194.033539, 7964.130836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17944.237946, 25376.047272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32439.609344, 20397.868668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22240.893097, 31613.581940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18127.707108, 28683.964203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27145.068000, 31664.856000, 1462.176042, 1462.176042, 0.000000, X, Y) && !ellipse(24620.833800, 32482.600600, 718.207221, 718.207221, 0.000000, X, Y) && !ellipse(23068.522000, 32612.699800, 1506.568043, 1506.568043, 358.321000, X, Y) && !ellipse(32504.386000, 28004.047200, 1506.568043, 454.138413, -0.000000, X, Y) && !ellipse(32221.365936, 25734.534637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23641.924000, 11520.328000, 2011.904058, 2011.904058, 0.000000, X, Y) && !ellipse(19819.108124, 17700.838135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32782.631600, 23414.816000, 1533.368044, 757.201622, -0.000000, X, Y) && !ellipse(23882.128662, 10812.448921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27437.159790, 32223.041260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31902.969513, 27189.846466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.410400, 12932.588800, 1895.072055, 566.402416, 90.000000, X, Y) && !ellipse(23915.693542, 13692.933350, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23937.361237, 14298.015854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21675.825867, 31730.081970, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17131.435200, 21528.906000, 1679.000048, 1049.808030, 0.000000, X, Y) && !ellipse(32008.257355, 27951.338074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31577.768250, 26138.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17810.449692, 23536.810242, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24882.734863, 33353.281921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25836.542000, 33005.166200, 1502.352043, 697.861620, 353.317000, X, Y) && !ellipse(23457.660000, 10463.602000, 812.712023, 812.712023, 0.000000, X, Y) && !ellipse(23999.263245, 32864.188354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32362.698456, 21102.185547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23716.762817, 9250.815117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.211212, 17474.133148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23720.126740, 9784.895500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.662000, 10757.344000, 2081.552060, 2081.552060, 0.000000, X, Y) && !ellipse(27820.007050, 32134.493378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25597.861694, 33875.584595, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23710.244000, 15351.682000, 1695.920049, 1695.920049, 0.000000, X, Y) && !ellipse(31352.324402, 19051.101074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32333.394897, 24138.939026, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32705.258301, 22133.713547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32984.986000, 28475.868000, 1960.704056, 1960.704056, 0.000000, X, Y) && !ellipse(22178.071121, 17487.385727, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31318.520569, 19485.757248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23716.675201, 12736.541351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17999.567429, 25872.285522, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28903.896210, 31251.244781, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32443.862701, 26931.419189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32565.468353, 26210.876099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27759.998000, 33044.646000, 996.600029, 996.600029, 0.000000, X, Y) && !ellipse(32243.676000, 22387.044200, 1546.696045, 1546.696045, 0.000000, X, Y) && !ellipse(31315.023895, 20311.873596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20251.826126, 31697.666718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17273.140793, 26667.942047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29396.112091, 31439.021729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23576.980835, 7830.768051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33083.541565, 21705.063049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23426.005249, 8480.172287, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25595.050018, 34577.457520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21723.782333, 32439.078339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17954.187668, 24831.330841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21086.611145, 31748.635315, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33246.833832, 19948.036346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32778.199921, 25732.094666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17891.669693, 22731.428345, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32764.507935, 24314.072723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25695.614563, 35356.913055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16887.544250, 25364.813843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29956.002014, 31246.866638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27864.390000, 33448.038000, 1984.856057, 1984.856057, 0.000000, X, Y) && !ellipse(26812.107483, 33268.435150, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28880.431061, 31652.087830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33165.552000, 23602.960200, 2290.568066, 2290.568066, 0.000000, X, Y) && !ellipse(17916.997345, 19842.416626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33479.302887, 18928.170563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18225.096237, 29175.078247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19656.677414, 31835.337952, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.000000, 37259.671661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17071.625397, 23785.923676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21003.686615, 17598.124344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19213.109634, 17817.535965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23022.711609, 13849.633179, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May  8 05:39:28 2012] Writing fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src105.gif
[Tue May  8 06:35:56 2012] Mean detx,y = (7854.96, 582.48) 
[Tue May  8 06:36:01 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 06:47:49 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 06:47:49 2012] Setting source spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Tue May  8 06:47:49 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src105_bgd.pi.gz
[Tue May  8 15:47:20 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:20 2012] Error reading totcts from fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src105_src_b10.pi.gz
[Tue May  8 15:47:31 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:31 2012] Using photon index=1.80, rate=0.104, arf fullrun_mos2_xmm0412592101_pi300-10000_pass1_cl_src105.arf
[Tue May  8 15:47:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:31 2012] Updating source flux to 1.6e-12
[Tue May  8 15:59:15 2012] Flag c found in src. 105 procflags, skipping spectral fitting