[Sat May  5 10:32:52 2012] Detection parameters:
  Position = (131.8, 173.2) = 5 35 19.73 21 53 15.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 101.3 +/- 19.6
  Background counts = 79.1
  Rate = 0.006 +/- 0.001

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 15.11'
[Sat May  5 10:41:16 2012] Using EEF radius (= 13.99 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:16 2012] Initial guess for spatial extent in simple fitting = 13.99"
[Sat May  5 10:41:16 2012] source mask rpix=3.2, npix_max = 55, mask sum = 64, frac = 1.159
[Sat May  5 10:41:16 2012] Giving source the simple spatial ID 58 for pass 0, mean size = 13.99"
[Sat May  5 21:59:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src58.ximg exists
[Sat May  5 21:59:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src58_1.ximg exists
[Sat May  5 21:59:52 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src58 appears to have run properly
[Sat May  5 21:59:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Sat May  5 21:59:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Sat May  5 21:59:54 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Sun May  6 14:30:50 2012] Spatial fit model total counts = 2198.080000, observed total counts = 2115.000000
[Sun May  6 14:30:50 2012] Offset between fit and detection position for source 72 = 8.861962 pixels
[Sun May  6 14:30:50 2012] 2261.308000 total counts/ 1779.740000 bgd. counts: snr = 11.415090
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 8.861962 pixels
  Position = (136.3, 165.5) = 5 35 18.33 21 52 37.5
  Extent = 28.0 (27.9-55.9)", rotation angle = 0
  Source counts = 481.6 +/- 47.6
  Background counts = 1779.7
  Rate = 0.03 +/- 0.003
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:32:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 27.97"
[Sun May  6 14:32:01 2012] source mask rpix=6.4, npix_max = 192, mask sum = 181, frac = 0.942
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 27.97"
[Mon May  7 01:40:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src54.ximg exists
[Mon May  7 01:40:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src54.csv
[Mon May  7 01:40:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src54_1.ximg exists
[Mon May  7 01:40:52 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src54.csv
[Mon May  7 01:40:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 01:40:56 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Mon May  7 01:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon May  7 01:40:56 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Mon May  7 01:40:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src54.csv
[Mon May  7 01:40:56 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 21:59:34 2012] Warning, spatial fit 54 centroid is now closest to src. 60
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major axis lower bound
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 22:01:07 2012] XMMSAS src. selection expression = ellipse(11806.024000, 14354.274000, 1678.242048, 1678.242048, 0.000000, X, Y)
[Mon May  7 22:01:07 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src72_src.reg
[Mon May  7 22:01:07 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (40, 69) - (233, 262)
[Mon May  7 22:01:07 2012] XMMSAS bgd. selection expression = annulus(11806.024000, 14354.274000, 2797.070080, 5594.140161, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(16527.586000, 20553.552000, 1711.448049, 1711.448049, 0.000000, X, Y) && !ellipse(17366.397369, 20135.899582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18656.916000, 16946.642000, 1755.536051, 1755.536051, 0.000000, X, Y)
[Mon May  7 22:01:07 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src72.gif
[Tue May  8 01:00:47 2012] Mean detx,y = (10509.43, 11874.65) 
[Tue May  8 01:00:51 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 01:03:04 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 01:03:05 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue May  8 01:03:05 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Tue May  8 15:47:11 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:11 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue May  8 15:47:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:17 2012] Using photon index=1.80, rate=0.0303, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src72.arf
[Tue May  8 15:47:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:17 2012] Updating source flux to 7.6e-13