[Sat May  5 10:32:51 2012] Detection parameters:
  Position = (279.1, 180.0) = 5 34 33.69 21 53 40.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 393.5 +/- 39.4
  Background counts = 435.2
  Rate = 0.04 +/- 0.004

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 8.70'
[Sat May  5 10:41:16 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:16 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Sat May  5 10:41:16 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.015
[Sat May  5 10:41:16 2012] Giving source the simple spatial ID 55 for pass 0, mean size = 10.78"
[Sat May  5 21:59:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src55.ximg exists
[Sat May  5 21:59:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src55.csv
[Sat May  5 21:59:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src55_1.ximg exists
[Sat May  5 21:59:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src55.csv
[Sat May  5 21:59:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 21:59:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src55.ximg exists
[Sat May  5 21:59:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src55_1.ximg exists
[Sat May  5 21:59:54 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src55 appears to have run properly
[Sun May  6 14:30:50 2012] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 11.159036 pixels away
[Sun May  6 14:30:50 2012] Source 69 is offset by -4.875706 and -3.022586 pixels which is larger than
2 X fitted extent = 1.254837 x 1.254837, not incorporating fit results
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:30:51 2012] Source is confused with source 18
[Sun May  6 14:32:01 2012] Using EEF radius (= 10.78 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 10.78"
[Sun May  6 14:32:01 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.015
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 52 for pass 1, mean size = 10.78"
[Mon May  7 01:40:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src52.ximg exists
[Mon May  7 01:40:52 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src52_1.ximg exists
[Mon May  7 01:40:52 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src52 appears to have run properly
[Mon May  7 01:40:56 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Mon May  7 01:40:56 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Mon May  7 01:40:56 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Mon May  7 21:59:34 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 69 at 11.386349 pixels away
[Mon May  7 21:59:34 2012] Warning, spatial fit 52 centroid is now closest to src. 70
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 22:01:07 2012] XMMSAS src. selection expression = ellipse(24233.869598, 15612.935043, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May  7 22:01:07 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src69_src.reg
[Mon May  7 22:01:07 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (242, 143) - (317, 218)
[Mon May  7 22:01:07 2012] XMMSAS bgd. selection expression = annulus(24233.869598, 15612.935043, 1087.500000, 2175.000000, X, Y) && !ellipse(25834.000000, 15951.976974, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(22147.120117, 17702.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22957.328857, 17613.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26992.338837, 16980.107864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24628.313800, 16455.768000, 1698.856049, 1698.856049, 0.000000, X, Y) && !ellipse(24406.093020, 14355.024000, 1779.432051, 1779.432051, 0.000000, X, Y) && !ellipse(24395.143800, 13654.548000, 3552.592102, 3552.592102, 0.000000, X, Y) && !ellipse(24533.432920, 12505.843800, 1227.000035, 1227.000035, 0.000000, X, Y) && !ellipse(24312.388800, 10738.524000, 3197.768092, 3197.768092, 0.000000, X, Y) && !ellipse(26651.796814, 17527.017349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22223.837189, 16912.764374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21354.057020, 17937.332800, 1645.392047, 1645.392047, 0.000000, X, Y) && !ellipse(24553.635000, 15902.216000, 1670.168048, 1670.168048, 0.000000, X, Y) && !ellipse(24086.527800, 15106.816000, 1724.496050, 1694.048049, 290.894000, X, Y) && !ellipse(24670.504000, 14356.676000, 1825.040053, 1825.040053, 0.000000, X, Y) && !ellipse(23785.048000, 13209.796000, 775.674422, 775.674422, 0.000000, X, Y) && !ellipse(24236.873800, 13533.128000, 1884.128054, 1884.128054, 0.000000, X, Y) && !ellipse(23797.582000, 12443.820000, 2000.064058, 2000.064058, 0.000000, X, Y)
[Mon May  7 22:01:07 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src69.gif
[Tue May  8 00:58:41 2012] Mean detx,y = (8956.39, -204.16) 
[Tue May  8 00:58:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May  8 00:59:29 2012] Binned source spectrum to 10 counts/bin
[Tue May  8 00:59:30 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue May  8 00:59:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Tue May  8 04:46:31 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 04:46:31 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:11 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:11 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Tue May  8 15:47:17 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:17 2012] Using photon index=1.80, rate=0.0396, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src69.arf
[Tue May  8 15:47:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:17 2012] Updating source flux to 7e-13
[Tue May  8 15:47:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting