[Sat May  5 10:32:38 2012] Detection parameters:
  Position = (192.5, 309.9) = 5 35 0.79 22 3 11.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2368.3 +/- 245.1
  Background counts = 524.3
  Rate = 0.3 +/- 0.03

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 7.72'
[Sat May  5 10:41:15 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:15 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Sat May  5 10:41:15 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.883
[Sat May  5 10:41:15 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.29"
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src3.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src3.csv
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src3.csv
[Sat May  5 21:59:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sat May  5 21:59:53 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May  6 14:30:50 2012] Warning, spatial fit 3 centroid is now closest to src. 39
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:30:51 2012] Source is confused with source 39
[Sun May  6 14:32:01 2012] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 10.29"
[Sun May  6 14:32:01 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.883
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.29"
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src3.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src3.csv
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src3.csv
[Mon May  7 01:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 01:40:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon May  7 01:40:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon May  7 01:40:53 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon May  7 21:59:34 2012] Source 6 is offset by 4.745928 and 5.979701 pixels which is larger than
2 X fitted extent = 4.828230 x 4.828230, not incorporating fit results
[Mon May  7 21:59:34 2012] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.092952 pixels away
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 22:01:01 2012] Counts = 2368.290527, rescaling region sizes by 2.000000
[Mon May  7 22:01:01 2012] XMMSAS src. selection expression = ellipse(16699.979706, 26910.848022, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon May  7 22:01:01 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6_src.reg
[Mon May  7 22:01:01 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (118, 235) - (268, 385)
[Mon May  7 22:01:01 2012] XMMSAS bgd. selection expression = annulus(16699.979706, 26910.848022, 4350.000000, 8700.000000, X, Y) && !ellipse(16550.944946, 23533.932190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18003.790253, 24147.188202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17909.334930, 22397.946045, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(18175.569321, 27701.311310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17678.583679, 25020.637085, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22147.120117, 17702.003693, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20170.902000, 17880.427800, 1005.184029, 1005.184029, 0.000000, X, Y) && !ellipse(22957.328857, 17613.548737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18511.394684, 33613.817291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17596.506104, 30496.234100, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18252.263824, 30484.589142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17856.312668, 29007.171539, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17323.233231, 28657.047516, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18024.402573, 28157.928558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17198.562347, 27428.724762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17499.766000, 27008.278000, 1345.472039, 1345.472039, 0.000000, X, Y) && !ellipse(17912.446625, 25786.551971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17870.709564, 23704.108948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17873.372559, 23348.685486, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17492.869690, 21349.980759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16527.586000, 20553.552000, 1711.448049, 1711.448049, 0.000000, X, Y) && !ellipse(17366.397369, 20135.899582, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19107.090332, 17882.783310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19519.032730, 17777.796814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18656.916000, 16946.642000, 1755.536051, 1755.536051, 0.000000, X, Y) && !ellipse(21354.057020, 17937.332800, 1645.392047, 1645.392047, 0.000000, X, Y)
[Mon May  7 22:01:01 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6.gif
[Mon May  7 22:08:49 2012] Mean detx,y = (-1903.14, 7765.09) 
[Mon May  7 22:08:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 22:11:35 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 22:11:36 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon May  7 22:11:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue May  8 01:30:19 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Tue May  8 01:30:19 2012] rmf not generated due to insufficient counts
[Tue May  8 15:47:05 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:05 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Tue May  8 15:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:13 2012] Using photon index=1.80, rate=0.297, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6.arf
[Tue May  8 15:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:13 2012] Updating source flux to 4.9e-12
[Tue May  8 15:47:44 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May  8 15:59:15 2012] xmm0412592101/analysis//spectral/fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete