[Sat May 5 10:32:42 2012] Detection parameters: Position = (278.7, 110.0) = 5 34 33.81 21 48 35.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 431.7 +/- 33.4 Background counts = 140.7 Rate = 0.03 +/- 0.002 [Sat May 5 10:32:54 2012] Off-axis axis estimate = 13.73' [Sat May 5 10:41:16 2012] Using EEF radius (= 13.30 ")to estimate initial spatial extent for simple fitting [Sat May 5 10:41:16 2012] Initial guess for spatial extent in simple fitting = 13.30" [Sat May 5 10:41:16 2012] source mask rpix=3.1, npix_max = 50, mask sum = 56, frac = 1.107 [Sat May 5 10:41:16 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 13.30" [Sat May 5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src21.ximg exists [Sat May 5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src21.csv [Sat May 5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src21_1.ximg exists [Sat May 5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src21.csv [Sat May 5 21:59:51 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src21_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat May 5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists [Sat May 5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists [Sat May 5 21:59:53 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly [Sun May 6 14:30:50 2012] Spatial fit model total counts = 4291.740000, observed total counts = 4290.000000 [Sun May 6 14:30:50 2012] Offset between fit and detection position for source 26 = 3.222903 pixels [Sun May 6 14:30:50 2012] 4022.902000 total counts/ 3259.290000 bgd. counts: snr = 13.375537 Spatial fit parameters: Offset between fit and detection position for source 26 = 3.222903 pixels Position = (280.0, 113.0) = 5 34 33.41 21 48 49.2 Extent = 20.0 (13.5-26.6)", rotation angle = 0 Source counts = 763.6 +/- 63.4 Background counts = 3259.3 Rate = 0.05 +/- 0.004 [Sun May 6 14:30:51 2012] Source 26 is offset by -1.932110 and 2.337954 pixels which is larger than 2 X fitted extent = 1.576602 x 1.576602, not incorporating fit results [Sun May 6 14:30:51 2012] Vigneting correction estimate = 1.000000 [Sun May 6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 6 14:30:51 2012] Assessing source extent using major axis lower bound [Sun May 6 14:30:51 2012] Source does appear to be extended [Sun May 6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 6 14:30:51 2012] Source is confused with source 23 [Sun May 6 14:32:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 20.04" [Sun May 6 14:32:01 2012] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.959 [Sun May 6 14:32:01 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 20.04" [Mon May 7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src21.ximg exists [Mon May 7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src21.csv [Mon May 7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src21_1.ximg exists [Mon May 7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src21.csv [Mon May 7 01:40:51 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src21_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Mon May 7 01:40:55 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21.ximg exists [Mon May 7 01:40:55 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists [Mon May 7 01:40:55 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly [Mon May 7 21:59:34 2012] Warning, spatial fit 21 centroid is now closest to src. 23 [Mon May 7 21:59:34 2012] Vigneting correction estimate = 1.000000 [Mon May 7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Mon May 7 21:59:34 2012] Assessing source extent using major axis lower bound [Mon May 7 21:59:34 2012] Source does appear to be extended [Mon May 7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Mon May 7 22:01:04 2012] XMMSAS src. selection expression = ellipse(24312.070200, 9780.014000, 1202.142035, 1202.142035, 0.000000, X, Y) [Mon May 7 22:01:04 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src26_src.reg [Mon May 7 22:01:04 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (211, 44) - (349, 182) [Mon May 7 22:01:04 2012] XMMSAS bgd. selection expression = annulus(24312.070200, 9780.014000, 2003.570058, 4007.140115, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(24406.093020, 14355.024000, 1779.432051, 1779.432051, 0.000000, X, Y) && !ellipse(24395.143800, 13654.548000, 3552.592102, 3552.592102, 0.000000, X, Y) && !ellipse(24533.432920, 12505.843800, 1227.000035, 1227.000035, 0.000000, X, Y) && !ellipse(24313.106293, 11431.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24552.810000, 11454.238000, 1612.856046, 1612.856046, 0.000000, X, Y) && !ellipse(24312.388800, 10738.524000, 3197.768092, 3197.768092, 0.000000, X, Y) && !ellipse(24154.540000, 9265.662000, 2193.440063, 2193.440063, 0.000000, X, Y) && !ellipse(23656.758300, 8938.238000, 2119.672061, 2119.672061, 0.000000, X, Y) && !ellipse(24086.527800, 15106.816000, 1724.496050, 1694.048049, 290.894000, X, Y) && !ellipse(24670.504000, 14356.676000, 1825.040053, 1825.040053, 0.000000, X, Y) && !ellipse(23785.048000, 13209.796000, 775.674422, 775.674422, 0.000000, X, Y) && !ellipse(24236.873800, 13533.128000, 1884.128054, 1884.128054, 0.000000, X, Y) && !ellipse(23797.582000, 12443.820000, 2000.064058, 2000.064058, 0.000000, X, Y) && !ellipse(23540.702515, 11602.181412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.087067, 10656.313286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23442.739899, 10129.232887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.977783, 8478.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.817688, 7735.961601, 870.000000, 870.000000, 0.000000, X, Y) [Mon May 7 22:01:04 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src26.gif [Mon May 7 23:54:06 2012] Mean detx,y = (14723.09, -498.46) [Mon May 7 23:54:09 2012] Setting backscal keywords in source and bgd. spectrum [Mon May 7 23:55:20 2012] Binned source spectrum to 10 counts/bin [Mon May 7 23:55:21 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Mon May 7 23:55:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src26_bgd.pi.gz [Tue May 8 15:47:07 2012] Updating aperture counts using extracted products [Tue May 8 15:47:07 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src26_src_b10.pi.gz [Tue May 8 15:47:14 2012] Calculating source flux in energy range 0.30-8.00 [Tue May 8 15:47:14 2012] Using photon index=1.80, rate=0.0481, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src26.arf [Tue May 8 15:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 8 15:47:14 2012] Updating source flux to 1.2e-12 [Tue May 8 15:47:44 2012] Flag b found in src. 26 procflags, skipping spectral fitting [Tue May 8 15:47:44 2012] Flag c found in src. 26 procflags, skipping spectral fitting