[Sat May  5 10:32:41 2012] Detection parameters:
  Position = (275.7, 99.1) = 5 34 34.76 21 47 49.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 296.3 +/- 29.1
  Background counts = 127.0
  Rate = 0.02 +/- 0.002

[Sat May  5 10:32:54 2012] Off-axis axis estimate = 14.55'
[Sat May  5 10:41:16 2012] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Sat May  5 10:41:16 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat May  5 10:41:16 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Sat May  5 10:41:16 2012] source mask rpix=3.1, npix_max = 53, mask sum = 56, frac = 1.051
[Sat May  5 10:41:16 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 13.70"
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src20.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src20.csv
[Sat May  5 21:59:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src20_1.ximg exists
[Sat May  5 21:59:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src20.csv
[Sat May  5 21:59:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sat May  5 21:59:53 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sat May  5 21:59:53 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun May  6 14:30:50 2012] Spatial fit model total counts = 3474.270000, observed total counts = 3468.000000
[Sun May  6 14:30:50 2012] Offset between fit and detection position for source 25 = 4.904454 pixels
[Sun May  6 14:30:50 2012] 3418.779000 total counts/ 2504.410000 bgd. counts: snr = 18.271272
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 4.904454 pixels
  Position = (275.7, 104.0) = 5 34 34.77 21 48 10.2
  Extent = 27.3 (27.0-27.4)", rotation angle = 0
  Source counts = 914.4 +/- 58.5
  Background counts = 2504.4
  Rate = 0.06 +/- 0.004
[Sun May  6 14:30:51 2012] Vigneting correction estimate = 1.000000
[Sun May  6 14:30:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  6 14:30:51 2012] Assessing source extent using major axis lower bound
[Sun May  6 14:30:51 2012] Source does appear to be extended
[Sun May  6 14:30:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  6 14:30:51 2012] Source is confused with source 23
[Sun May  6 14:32:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May  6 14:32:01 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May  6 14:32:01 2012] Initial guess for spatial extent in simple fitting = 27.28"
[Sun May  6 14:32:01 2012] source mask rpix=6.3, npix_max = 183, mask sum = 182, frac = 0.992
[Sun May  6 14:32:01 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 27.28"
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src20.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src20.csv
[Mon May  7 01:40:51 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src20_1.ximg exists
[Mon May  7 01:40:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src20.csv
[Mon May  7 01:40:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 01:40:54 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Mon May  7 01:40:55 2012] fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Mon May  7 01:40:55 2012] Fit fullrun_mos1_xmm0412592101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Mon May  7 21:59:34 2012] Warning, spatial fit 20 centroid is now closest to src. 80
[Mon May  7 21:59:34 2012] Spatial fit model total counts = 6381.640000, observed total counts = 6380.000000
[Mon May  7 21:59:34 2012] Offset between fit and detection position for source 25 = 3.253306 pixels
[Mon May  7 21:59:34 2012] Warning, changing simple spatial fit ID from 20 to 63
[Mon May  7 21:59:34 2012] 5257.152000 total counts/ 4541.320000 bgd. counts: snr = 10.622337
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.253306 pixels
  Position = (272.5, 103.3) = 5 34 35.76 21 48 7.1
  Extent = 26.5 (26.4-53.0)", rotation angle = 0
  Source counts = 715.8 +/- 72.5
  Background counts = 4541.3
  Rate = 0.05 +/- 0.005
[Mon May  7 21:59:34 2012] Vigneting correction estimate = 1.000000
[Mon May  7 21:59:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May  7 21:59:34 2012] Assessing source extent using major axis lower bound
[Mon May  7 21:59:34 2012] Source does appear to be extended
[Mon May  7 21:59:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May  7 22:01:04 2012] XMMSAS src. selection expression = ellipse(23656.758300, 8938.238000, 1589.754046, 1589.754046, 0.000000, X, Y)
[Mon May  7 22:01:04 2012] Writing source region out to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src25_src.reg
[Mon May  7 22:01:04 2012] Extracting stamp from image fullrun_mos1_xmm0412592101_pi300-10000_cl_sm2.00.img.gz, (181, 12) - (364, 195)
[Mon May  7 22:01:04 2012] XMMSAS bgd. selection expression = annulus(23656.758300, 8938.238000, 2649.590076, 5299.180152, X, Y) && !ellipse(24514.914600, 17375.700000, 10193.136293, 10193.136293, 0.000000, X, Y) && !ellipse(24406.093020, 14355.024000, 1779.432051, 1779.432051, 0.000000, X, Y) && !ellipse(24395.143800, 13654.548000, 3552.592102, 3552.592102, 0.000000, X, Y) && !ellipse(24533.432920, 12505.843800, 1227.000035, 1227.000035, 0.000000, X, Y) && !ellipse(24313.106293, 11431.536041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24552.810000, 11454.238000, 1612.856046, 1612.856046, 0.000000, X, Y) && !ellipse(24312.388800, 10738.524000, 3197.768092, 3197.768092, 0.000000, X, Y) && !ellipse(24154.540000, 9265.662000, 2193.440063, 2193.440063, 0.000000, X, Y) && !ellipse(24312.070200, 9780.014000, 1602.856046, 1602.856046, 0.000000, X, Y) && !ellipse(24553.635000, 15902.216000, 1670.168048, 1670.168048, 0.000000, X, Y) && !ellipse(24086.527800, 15106.816000, 1724.496050, 1694.048049, 290.894000, X, Y) && !ellipse(24670.504000, 14356.676000, 1825.040053, 1825.040053, 0.000000, X, Y) && !ellipse(23785.048000, 13209.796000, 775.674422, 775.674422, 0.000000, X, Y) && !ellipse(24236.873800, 13533.128000, 1884.128054, 1884.128054, 0.000000, X, Y) && !ellipse(23797.582000, 12443.820000, 2000.064058, 2000.064058, 0.000000, X, Y) && !ellipse(23540.702515, 11602.181412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24781.087067, 10656.313286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23442.739899, 10129.232887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24541.977783, 8478.660248, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24035.817688, 7735.961601, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May  7 22:01:04 2012] Writing fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src25.gif
[Mon May  7 23:51:41 2012] Mean detx,y = (15521.17, -135.81) 
[Mon May  7 23:51:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May  7 23:53:50 2012] Binned source spectrum to 10 counts/bin
[Mon May  7 23:53:50 2012] Setting source spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon May  7 23:53:50 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue May  8 15:47:07 2012] Updating aperture counts using extracted products
[Tue May  8 15:47:07 2012] Error reading totcts from fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue May  8 15:47:14 2012] Calculating source flux in energy range 0.30-8.00
[Tue May  8 15:47:14 2012] Using photon index=1.80, rate=0.0451, arf fullrun_mos1_xmm0412592101_pi300-10000_pass1_cl_src25.arf
[Tue May  8 15:47:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May  8 15:47:14 2012] Updating source flux to 1.2e-12
[Tue May  8 15:47:44 2012] Flag c found in src. 25 procflags, skipping spectral fitting